Geometric Bags! (Addi Express or Sentro 22 Needle Circular Knitting Machine Pattern)

Lina Rose Knits
7 followers
51 Video Views·Nov 15, 2022
Today I'm going to show you how to knit a geometric style handbag using a circular knitting machine.
This pattern is inspired by a traditional granny square bag technique that's often used for crochet
bags. I wanted to find a way to adapt the technique for knitting machines using a bright modern look.
I'm going to show you every step of the process in this video but if you'd like to support the
channel you can purchase the printable pattern in my shop linked below. The pdf includes both
detailed instructions on how to knit the bag as well as a blank template that you can use to
sketch out and plan for your own bag designs. You can print your template to sketch by hand
or you can bring it into a paint program to design your bag digitally. The bags measure
approximately nine inches wide by 13 inches high including the handle. The bottom area of the bag
measures about six and a half inches high. It's the perfect size to fit a wallet, phone, and keys.
I'm also working on a large size of this pattern so stay tuned for that video. If you make this
project please tag me on social media when you share your work. At Diana Levine Knits on Instagram,
Facebook, TikTok, and Pinterest. In terms of timing it took me about 45 minutes to knit the pieces,
20 minutes to seam the ends, 45 minutes to seam the bag together, and about 25 minutes to knit
and attach the I-cord handles for a total project time of approximately 2 hours and 15 minutes from
beginning to end. That being said we all go at different paces so project time will vary from
person to person. There are so many ways to customize these bags. You can play with different
color patterns, you can crochet, hand knit, or braid the handle instead of the I-cord, you could knit
the bag all in one color, you could change the length of the handle and make it a shoulder or
cross body bag, you could line the inside of the bag with fabric, you could add an embellishment
to the front, you could add a magnetic clasp, you could add a button closure, or you could knit a
pocket for the inside. For this video I'm going to show you how to make the multi-color bag but you
can find the details for how to make the checkered bag and the striped bag in the printable pattern
linked below. I have lots more fun quick and easy patterns coming soon so don't forget to subscribe
to the channel to stay up to date when I release my latest videos. And if you'd like to check out
all my knitting machine books, templates, and patterns visit dianalaveenknits.com. The techniques
I'm going to walk you through today include casting on and off of a knitting machine with
scrap yarn, changing colors, seaming the ends, assembling the bag, seaming with the mattress
stitch with both vertical and horizontal pieces, and how to knit the I-cord handles using an I-cord
machine. All the supplies I'm using today are linked in the description below. For this project
I'm using a 22 needle Addi knitting machine or you can switch this out for the Centro 22 needle
machine. For the handles I'm using the Tulip I-cord machine but you can use any I-cord machine or if
you don't have one you can hand knit, crochet, or braid the handle instead. I'm using Loops and
Threads impeccable yarn in a variety of colors. You'll also need a crochet hook, a darning needle,
scissors, stitch markers, and if you'd like to include one a knitting tag. Before we begin I
want to encourage you to knit up a sample square before beginning the project. This pattern is
created using squares and it's important that your dimensions are accurate. Tension can vary
from person to person and yarn to yarn so it's possible you'll need to knit a row or two more
or less than I did if your tension is significantly different than mine. I would suggest following my
row count but if your squares aren't looking even adapt the pattern so that your panels match the
dimensions shown in this video. Step one is knitting the pieces. This bag is created using
five panels. Follow the pattern from the top to the bottom of each panel. We'll begin with the first
panel which will be two squares. Cast on to a 22 needle machine using scrap yarn that you'll be
removing at the end of the project. Wrap your yarn around the first needle and then weave the yarn
front and back along all the needles until the end of the row. When you reach your first needle again
place your yarn into the tensioner. Hold the yarn to provide tension. Turn the knob to begin knitting.
Start slowly for the first couple of rows and then you can begin to pick up speed. Knit five rows in
the scrap yarn. When you finish the five rows cut the scrap yarn and throw it in the middle of the
machine. Switch to your main color making sure to leave a long tail which we'll be using to seam the
headband later. For this project I leave about a two foot tail to be on the safe side. For the rest
of the pattern make sure to leave a long tail when both casting on and casting off. Place the yarn
tail right next to the scrap yarn tail and hold them close and low as you slowly begin to knit the
next row. Set your counter back to zero. For the first square knit 16 rows in the first square color.
Next we'll switch to the second square's color. For this project I like to move my yarn color
changes off by a few stitches from the cast on needle. I do this because the yarn change can
sometimes create a small bump on the side of the work and I find that it makes the bag seam look
messy if the yarn changes occur at the same place as the cast on stitches. So for this bag I cast on
the first color before the first needle here but when I change the colors in the middle of the
panels I purposely knit three additional needles after finishing my row count before switching to
the next color which will move the yarn change bumps to the inside of the bag. When you switch
to the next color cut a tail about five or six inches long and throw it in the middle of the
machine after the third needle from the cast on needle. Next leave another five to six inch tail
in the next square color and hold the two yarn tails together close and low as you slowly begin
to knit the next row. After you've knit a few stitches turn your counter back to zero to begin
counting the next square. Knit 16 rows for the second square. After about five rows after each
yarn color change tie a quick knot between the two yarn tails from the color change. Don't double
knot these yet just one quick knot to secure the ends is great. We'll come back at the end to secure
these knots. When you finish 16 rows switch back to the scrap yarn. When you switch back to the
scrap yarn you want to go back to doing the switch before the first needle just like we did when we
cast on. Knit five rows in the scrap yarn. When you finish five rows cut the yarn and continue
knitting until the work falls off the needles. Pull the work out of the machine and gently stretch
out the stitches. Put the work aside for now while we knit the second panel. For the second panel
we'll be knitting these three squares beginning with the top square and working our way down to
the bottom square. Cast on again to your 22 needle machine using scrap yarn and knit five rows in the
scrap yarn. Switch to your first square color switching before the first needle. Knit 16 rows in the first color.
When you finish 16 rows switch to the second square color remembering to switch after the
third needle. Knit 15 rows in the second square color. When you finish 15 rows in the second square
color switch to the third square color again switching after the third needle. Knit 16 rows
in the third square color. After you finish 16 rows switch back to the scrap yarn making the
switch before the first needle. Knit five rows in the scrap yarn. Cut the yarn and continue knitting
until the work falls off the needles. Gently stretch out the stitches and set aside the work
while we knit the third panel. For the third panel we'll be knitting four squares starting
with this top square and working our way down to this bottom square. This will be the longest panel.
Cast back on to the 22 needle machine using scrap yarn and knit five rows in the scrap yarn. Switch
to the first square color before the first needle. Knit 16 rows in the first square color. After 16
rows knit three additional stitches and switch to the second square color changing after the third
needle. Knit 15 rows in the second square color. Next switch to the third square color again switching
after the third needle. Knit 15 rows in the third square color. Next we'll knit the fourth square.
Switch again after the third needle to your fourth square color. Knit 16 rows in the fourth square
color. After 16 rows switch back to the scrap yarn. Knit five rows in the scrap yarn. Then cut a short
tail and continue knitting until the work falls off the needles. Gently stretch out the stitches
and put the work aside while we knit the fourth panel. Next we'll knit the fourth panel which will
be these three squares beginning with the top square and working our way down to the bottom
square. Cast on to the 22 needle machine using scrap yarn and knit five rows in the scrap yarn.
Switch to the first square color before the first needle. Knit 16 rows in the first square color.
After the first square switch to the second square color making the switch after the third needle.
Knit 15 rows in the second square color. After the second square switch to the third square color
making the switch again after the third needle. Knit 16 rows in the third square color. After you
finish the third square switch back to the scrap yarn switching before the first needle. Knit five
rows in the scrap yarn. Then cut the yarn and continue knitting until the work falls off the
needles. Pull the work out of the machine and gently stretch out the stitches. Set the work
aside while we knit the last panel. Next we'll knit the last and smallest panel. This panel is just one
square. Cast on to the 22 needle machine using scrap yarn and knit five rows in the scrap yarn.
Before the first needle switch to the square color yarn. Knit 17 rows in the square color.
After 17 rows switch back to the scrap yarn. Knit five rows in the scrap yarn. Next cut the
yarn and continue knitting until the work falls off the needles. Pull the work out of the machine
and gently stretch out the stitches. We're done knitting. We now have five panels. The first panel
has two squares. The second panel has three squares. The third panel has four squares. The
fourth panel has three squares and the fifth panel is one square. Step two is seaming the ends. Before
we seam turn each of the first four tubes inside out so that the v-shaped stitches are on the inside
and the bumpy stitches are on the outside. You'll see all the yarn tails that are left over from
when we switched colors. Secure all the yarn tails with knots except for the yarn tails between the
scrap yarn and the cast on and cast off colors. As you're securing them with knots make sure to
pull the tails tight enough that the stitches on the outside are brought together but not so tight
that it bunches up the work. As you're securing the knots check the outside of the work to see
how your tension is looking. Trim the tails as well. Our tails are now secured and trimmed.
Next turn the tubes right side out. You'll notice that all the tubes have open ends. We'll use a
crochet hook to seam the sides of the tubes closed. Bring the sides of the tube together lining up the
stitches on top of each other with the two yarn tails all the way to the left side. Make sure that
when you arrange the stitches there's one stitch all the way to the right that's perpendicular to
the rest of the stitches. Bring your crochet hook under that loop all the way to the right and then
pull through the stitch that's to its left on the top side. Then pull through the stitch that's to
its left on the bottom side. Continue in this pattern pulling through the next stitch on the top
followed by the next stitch on the bottom until the end of the row. When you reach the end of the
row pull the yarn tail through. Next remove the scrap yarn. For the side that's more challenging
to remove identify the top length of yarn running through the top stitches and remove that length
a few stitches at a time. Once that length is removed the rest of the stitches will pull off
much more easily. Next turn the work around and repeat the same process on the other side of the
panel. We just finished seaming the ends of the first panel. Now repeat the same process on both
sides of the rest of the panels. Our five panels are now knit and seamed and we're ready to assemble
the bag. Step three is assembling the bag. Place your first panel diagonally. Place your second
panel below it with the bottom squares aligned together. Place your third panel below that one
with the top squares aligned together. Next place the fourth panel below halfway down from the
previous panel. Then place the fifth panel below aligned with the center square above it. Step four
is seaming the panels together. Begin with the top two panels. Add a couple of stitch markers to bring
the work together while you seam. Thread the yarn tail onto a darning needle. Next we'll be using the
mattress stitch to seam the panels together. When I seam with the mattress stitch my first step is to
identify one line of v-shaped stitches on either side of the pieces I'm seaming, making sure they're
both running in the same direction. When I seam I'll be working through the bars located directly
next to those two rows located here. For this seam I'll be threading my needle through two interior
bars on the top of the side of one panel shown here. Then I'll pull the yarn through and I'll
thread the needle through two interior bars on the side of the other panel shown here. Again I'll
thread through two bars on one side and pull the yarn through. Then I'll thread through two bars
on the other side and pull the yarn through. Continue in this pattern alternating between two
bars on one side followed by two bars on the other side until the end of the row. For this seam I'm
threading through two bars at a time, but if you prefer to work one bar at a time for these seams
that works too. As you seam make sure to pull the working yarn somewhat tightly. You don't want to
pull so tightly that it bunches up, but you want to pull it tightly enough that the seam looks secure.
Remove the stitch markers as you approach them. When you reach the end of the row turn the work
upside down and secure the yarn tails with a few good knots. By turning the work upside down you'll
be placing the yarn tail knots on the inside of the bag. This is an important step as you don't
want the yarn tail knots showing on the outside of the bag. We just finished seaming the first
two panels together. Next join the third panel to the second with stitch markers. Use the same
process as earlier to use the mattress stitch to seam the panels together. Again when you reach the
end make sure to turn the work over and secure the yarn with a few good knots on the back of the
piece. We just finished seaming the third panel. Next we'll again use the mattress stitch to seam
the fourth panel to the third. Turning the work over to secure the knots at the end. The last step
is to seam the fifth panel to the bag. Use the mattress stitch to seam the panels together.
Turning over the work to secure the knot at the end. Our bag panels are now seamed together. Step
five is seaming the bag. Place the work with the inside of the bag facing up. This back of the work
will be the side that has the yarn change bumps and yarn tail knots because those are all things
that we want on the inside of the bag not on the outside. Fold the bottom half of the bag up to the
top then fold the sides in. This will be the shape of our bag. First we'll seam the bottom right side
of the bag then we'll seam the bottom of the right square and then the top of the right square. Then
we'll work on the left side seaming the bottom left side of the bag followed by the bottom of
the left square followed by the top of that square. For these seams you want to make sure you're using
a yarn tail or length of yarn that's the same color as one of the squares you're seaming.
When seaming these sides together switch to threading through one stitch at a time.
For the side where you're continuing to pick up interior bars this is how I'm working through
that stitch. For the side where you're working through the v-shaped stitches here's how I'm
working through that stitch. Alternate between these two stitches until you reach the next square.
As you're working if you ever find that the sides aren't seaming equally you can play it by ear and
if you need to work through two stitches on the bottom side to catch up to the top that's okay.
When you reach the end of this square we'll need to switch to a color that matches the next square
so if your current color doesn't match secure the length with a knot on the inside of the bag.
You can leave the tail out for now because we'll come back soon to weave in all the tails.
Cut a length of yarn in the same color as one of the next squares and thread it onto a darning
needle. For the next row we'll be working through v-shaped stitches on both sides of the pieces.
This is how I'm working through the stitch on the top and this is how I'm working through the
stitch on the bottom side. For this side work through one stitch at a time. For this seam
don't pull as tightly as when we were seaming the panels together. Keep a nice even tension as you
work. After you reach the corner you can go back to the typical mattress stitch threading through
two interior bars on either side of the work alternating between the two until the end of the
row. When you reach the end thread the yarn to the inside of the back and secure the tail with
a few good knots. We just finished seaming the right side of the bag. Next repeat the exact
same process on the left side of the bag seaming the bottom left edges followed by the two sides
of the left hand square. I just finished seaming the bag together. Step six is securing the yarn
tails with knots and weaving in the ends. At this point in the project you'll have lots and lots of
yarn tails that we need to clean up. Turn the bag inside out. I like to use a pair of scissors to cut
all the tails together to create a shorter length before I begin working. Hiding the tails is really
easy with knitting machine panels because the knitting is double layered which means there's a
Simply thread the yarn tail onto a darning needle, thread it into the center of the square,
pull it through, cut the yarn tail close, and then wiggle the work until it's tucked into the center.
Repeat this process with all the yarn tails. I just finished weaving in all the yarn tails and
our bag is almost complete. Step seven is knitting the handles. For this project I'm using a tulip
i-cord knitting machine. However you can create the handles in a variety of ways. If you prefer
to hand knit the i-cord please refer to my wristlet clutch video in which I share a tutorial
on how to use double pointed knitting needles to knit the i-cord by hand. Or you could mix it up
and use a crochet or braided handle. But for today's project I'll show you how I made these
with the tulip machine. Begin by threading your yarn through the loop on the left side of the
machine and down through the middle until it's coming out of the bottom. Then attach the weight
to the bottom of the yarn. As you knit make sure you're holding the yarn with your left hand to
provide tension and also make sure that you're holding the machine in the air with the weight
pulling on the yarn. Make sure that all four hooks are open. First we'll knit the setup row.
Turn the knob until one hook captures the yarn. Turn the knob slowly for the next one.
When you reach the second hook use a crochet hook or your fingers to pull the yarn behind the second
hook. Turn the knob again and let the third hook pick up the yarn. Then for the fourth needle use
the crochet hook or your finger again to move the yarn behind the last hook. After the setup row is
done you'll now let the hooks pick up every stitch. Go very very slowly at first making sure each
stitch is captured and also making sure that the weight is still pulling down through the center
yarn. After you get through about an inch of the i-cord you can begin to pick up the speed,
rotating the knob until the i-cord begins to come out of the bottom of the machine.
For this project I don't measure the length of the i-cord, I just knit until the work reaches
the top of the machine when I bring it up. Once it hits about that length cut a six to eight inch tail
in the yarn, unloop it from the hooks and turn the knob a few times until the work falls off the
needles and you can pull the piece out from the machine. At this point I'll lay the i-cord out to
see if I like the approximate length of the handle. Next repeat the exact same process one more time
using the machine to create the second handle. For the second handle I always try to make it a
little bit longer than the first because you can always pull stitches out to make the i-cord
smaller. Here I have my two i-cords fully knit and ready to bind off. You'll notice that they're
different lengths and that's totally fine for now. Bring the first cord back to the bag and decide if
you'd like to shorten the i-cord at all. For mine I decided to take off about an inch from the length.
To do this pinch the i-cord where you want the length to end and gently pull the stitches out
until you reach your fingers. Now that I have my desired length for the first i-cord I need to
shorten the second cord to match the first. Again pinch the i-cord at the desired length and simply
pull the yarn gently to pull the stitches out. Next we need to bind off the i-cords. Each i-cord
will have four open loops. Thread the yarn tail onto a darning needle and thread through all four
open loops. Then as you pull the loops closed secure the end with a knot. Repeat the same process
on the end of the other handle. I just finished binding off both of my handles. Next attach the
handles to the bag. Thread one of the yarn tails onto the needle and thread through a few stitches
on the top corner to ensure a secure attachment. Work this way a few times and then stitch around
the edges through some individual stitches as well to make sure that the handles are attached
really well. You want to make sure that this is a really secure attachment. When you're done tie a
of tight knots on an interior bar of the handle and weave in and trim the ends. When you go to
attach the other side of the handle try to untwist the i-cord as much as you can so that the handle
isn't twisted. Repeat the process of stitching the handle to the corner on the remaining three
ends of the handles. Our bag is almost complete. Step eight is adding a knitting tag. This step
is optional but I like to add a knitting tag to all my work. You can add your tag wherever you
prefer but I like to place mine right in the middle. Our bag is complete. If you make this
project please tag me when you share your work at Diana Levine Knits on Instagram, Facebook, TikTok,
Pinterest, Etsy, and Ravelry. If you'd like to support the channel and download this entire
pattern as a printable pdf to have on hand as well as the template please visit the link in
the description below to purchase the pattern. If you'd like to check out all my knitting machine
books, patterns, and templates visit DianaLevineKnits.com and if you found this video helpful
please give it a like, comment below, and subscribe to the channel to stay up to date
when I release my latest videos. Thanks for watching and I can't wait to see your work!
