Romanian M74 Gas Mask

Military Head & Gear
1 follower
Jun 29, 2026
Romanian M74 Gas Mask/Respirator. A licensed copy of the West German M65 respirator, I have previously reviewed the M85 version of this mask, basically this one but with a drinking tube/hydration system built in.
AI Generated·May contain errors
Video Summary
AI GeneratedA review of a Romanian M75 gas mask, which is a licensed copy of the West German M65. The presenter examines its construction, compares it to Soviet and German counterparts, and tests the fit and strap system, noting that while the rubber quality is high, the friction-based strap system is prone to slipping.
Hello, so currently there's a power cut so even though I'm filming this now I won't be able to
edit it or upload it till all that's finished. So I'm going to do a video on it's I think the
Romanian M75 it might be the M74 and again the power cut I can't even get mobile signal,
can't double check the name but this is quite an interesting mask. I've done a video already on
like the version of this is the drinking tube which is I think either the M84 or the M85
that's why I'm getting confused. But this is actually quite interesting because it's a mask
from communist Romania but it's actually a licensed copy of the West German M65 and it's
better quality than the M65. So the strange thing about, what's his name, Ceausescu I think his name
was, the weird thing about his like sort of communist regime as horrible as it was in Romania
is they actually had quite a lot of like licensed foreign products there like hence why Dacia cars
are made from Reynolds. So the bag is actually quite nice the clasp system is a bit simple
but the bag is actually kind of one of those nice sort of fabrics with a good kind of plasticky
coating on. So what we've got in here look everything is still all sealed up we've got a
filter now I don't know if this filter because it's one from the early 2000s a cff3 I don't know
if that is the surplus sellers put this in rather than the old Romanian filter as a safety precaution
or I don't know if these masks are still being issued to troops and they've got them ready to
go to some newer filters. So there you go there's the filter and here is the mask so let's chuck the
bag aside for now because I don't think there's anything else in there the bag's one of those
simple kind of two-part bags I think there's a little couple of pockets in there if you had some
accessories in there but for the most part it's one of those satchels of a couple of sort of places
So here is the mask in its bag let's get that out it's a bit clingy and it's obviously ripped the
bag a bit over the years so I'll probably just yeah I'm just going to rip this bag apart now
because it's been in there so long. Right so here we go here is our pristine condition M75 I'm just
going to call it the M75 from now on. So we've got a voice diaphragm cover there and you can
actually see for now if I get that off or sorry XL valve cover so this doesn't actually have a
voice diaphragm on it it's just an XL valve my apologies but you can see there's a bit of
polystyrene stuck in there the reason being that they've kept the shape of the mask by putting a
polystyrene bit in the mouth cup so let's open that up and yeah look look how crumbly that is
so what I'm going to do is not on camera because this is just going to go everywhere I'm going to
put this mask over a bin and try and get all the little polystyrene bits out so I don't breathe
those in in a minute when I try it on anyway the mask date is 1984 so there we go this one
again I don't know if that's going to show up on the camera in the bad lighting because I can't
put ceiling lights on in the power cut that is 1984 that this mask was produced still smells
very new obviously there's no dirt on it whatsoever because it's never been issued so yeah
I got this from was it surplus and lost or surplus and outdoors it was one of the two
I think it was surplus and lost but yeah so what I'm going to do now I'm going to actually need a
little pin to poke that out and I can hear what sounds like a power tool in the distance so maybe
the power's back on somewhere or maybe that's some fixing the power lines but anyway let me
get the polystyrene out then we'll carry on the video okay so as you can see I've managed to get
nearly all the polystyrene out there's still a couple of little bits trapped in there that
inevitably I think going to go up my nose so yeah polystyrene is not the greatest material for
shoving inside a gas mask to keep its shape over the years if you're like a country you know or
somebody your quarter master going to put them in storage I know that was a piece of
polystyrene professionally done to that size but please use like a bit of cardboard or something
because it's not going to react with the rubber in the mask and that stuff tends to at least be
kind of solid when you pull it out decades later I mean I know a lot of the modern sort of more
expensive masks have actually proper face fitting plastic kind of almost like you know mannequin
kind of half faces that they put in the mask to keep their shape so anyway exhale valve there
with a little protective cover over it not a voice diaphragm and intake valve there pretty
simple layout you obviously see your oral nasal cup in there with your two eye pieces
does this mask have a tissot system the closest thing this has to a tissot system if you have a
look if you can see that is you've just got the sort of little valves on each side of the lenses
might be easier to show you that real lens if I can get the angle probably not because these things
there we go so it's just one of those masks that has an air system that's designed so the oral
nasal cup keeps you know the stuff flowing and I'm hoping two means size two so that should hopefully
be a good fit for me if it was like size one to four or something that generally means it's closer
to a medium or a large I think a large looking at this so anyway let me get I'm not going to open
this filter because it's still sealed I'm just going to stick one of my other 40 millimeter
filters on it and then we will have a look oh and also because Romania copied western masks
as far as where most of Romanian masks are actually 40 millimeter NATO Stanag they are not GOST
which is really good obviously if you're getting one of these as a surplus mask and they're in
condition like this because you'll have no issue getting filters for it hello so as you can see
I need a haircut and a bit of a shave but this mask has one of those like thin rubber neck straps
which is nice means you can sort of carry it around without it on your face or in a satchel
if you wanted to so hoping I don't inhale a load of polystyrene I'm just going to put the
chin sort of rest in there I think back in the position it's meant to go in because obviously
the problem with these sort of things is I'm pretty sure that's meant to be on this side of
yeah it's like to show you what it would look like the other way around I'm pretty sure it's
not that way around the rubber looks a bit more stretched like that I'm pretty sure this chin
bit goes that way around into the oral nasal cup right so this looks like it's a very straightforward
mask with easy to tighten and easy to loosen straps which is good they kind of look like
m65 straps just not as um kind of you know not as rigid so they should tighten and loosen a bit
easier let's try the mask on there's a very interesting smell to it um not unpleasant
just strange right so let's see if I can untighten this I can see polystyrene moving about inside
hoping that doesn't get lodged at my nose let's lose two it's pulling my hair I definitely need
a haircut now that hurts there we go so yes the Romanian m75 if I am getting the name right of
this mask is actually genuinely a good bit of surplus as I said it's definitely higher quality
than a lot of the Soviet masks it's basically a better version of the West German m65 this m65
made from a more comfortable rubber with a better strap system on it basically the same system just
made to you know tighten and loosen a bit easier although have I found a problem now when I loosen
that strap look it pinged off oh no I think this has similar it's not as bad it has a similar strap
system to that pewter mask sort of system so what I'm gonna have to do is just reattach that but
yes it's got one of those kind of yeah mask designers don't use a strap system like this
it's got friction based little straps it's not as bad as the pewters one but yes this
is not a good system unless they put that on backwards yes I think here I think I found the
problem or is it I'm not sure no I think that is the correct way around but yeah they've this mask
has one of these sort of systems where the little roller just sits in a bit like that so what can
quite easily happen is that yeah it's very easy to over tighten or under tighten and have the mask
pop out with its little thing so I will anyway repair this because it's not an actual broken bit
it's just something you have to sort of force back through friction so other than the strap sort of
at the end pinging off because of the fact that they use one of those weird friction
based systems which if you're a gas mask designer never do that for obvious reasons that if that
goes wrong in the field that could be a you know a casualty or a fatality for the person wearing it
but yes other than that it seems very good it's just a case of I guess
be very careful tightening and loosening the straps in case they ping off
