Canadian composite helmet history

Military Head & Gear
1 follower
12 Video Views·Dec 12, 2024
Hello there YouTube, Devin here again and today we have the historical Canadian composite helmet
video. Now I've done this twice before for the Germans and... not the Germans, sorry, my bad.
Totally butchered it right off the start. The British and the Americans. Now we're going to
look at the Canadians here. Now a lot of you fellow collectors right off the bat are going to say,
well this isn't a composite helmet and you're right, it's an M1 helmet. But I consider part
of the M1 helmet to be a composite helmet and it's the the liner. Now the liner is meant to
be used standalone and you can see many pictures even from its conception of the M1 helmet liner
being used as a standalone helmet and when you don't necessarily need the big heavy steel outer
protection one, the inner one functions about the same as a construction helmet. It's minor
bump protection and stuff like that and the Canadians used, they replaced all of their
turtle helmets, well their British World War II turtle helmets and their World War II Brody helmets
in the 70s with M1s from U.S. stock. They're all Vietnam configuration M1s. Recently they
sold a ton of them off too and I've been seeing people saying they can selling the Canadian ones
as authentic issued Vietnam ones and that's not true. So be very very careful when you're
purchasing one because right behind the World War II ones, the Vietnam ones are the most popular and
they can fetch a really really high price if they can be authenticated as actual Vietnam issued
helmets. So a lot of people are selling these Canadian now surplus ones as actual Vietnam
issued helmets. So just be wary. Now this one here is just a triple bail because I like it more,
the shell. It is a Canadian liner though. It's the late, very very late Kevlar one
which it's a thin Kevlar so it's not as thick as like an actual ballistic helmet. It's probably
a third of thick as an ACH or a Pasgat but it's going to offer more bump protection and better
deformation patterns than the older ones like fiberglass or the compressed cotton ones.
It's going to offer a better deformation pattern than those ones so
that's why they upgraded to the Kevlar versions but other than that it's not going to do any
better at stopping a bullet alone or anything like that and it does add some weight actually
because Kevlar is a lot denser and heavier than the fiberglass ones. So just something cool I
thought you guys would like. So from that though in the 90s the Canadians held a whole bunch of
helmet trials and stuff like that and they tested a whole bunch of helmets. The the Orlite, the Mark
6, the American Pasgat, a bunch of different stuff. They really really liked a lot of features and
stuff like that but they really couldn't pick just one or the other to choose so they took a whole
big mashup of a bunch of other ones and they got together with Bardet which is one company that was
in the helmet trials and Bardet was like we can make one locally for you which is ultimately why
the Canadians decided to go with Bardet mostly I think is because of a national pride thing
whereas a lot of militaries do that. They might not necessarily take the best thing if they can
get something made locally because it's a whole national pride thing and funding and yeah there's
a whole bunch of stuff in it and it's happened a lot of times historically such as with firearms and
body armor and uniforms and the whole jazz pretty much everything the military can get they want to
get it locally that's why the U.S. has the Barry Amendment and stuff like that but this is the
Bardet helmet and this is a size medium Bardet helmet is a Gen 1 Bardet as you can see by the
liner it has the foam hockey pad liner pretty much whereas later they would have went to a
PASGAT style suspension helmet and the PASGAT will be shown in this video as well because they
were used by Canadians so but it has a very complicated chin strap and assembly and stuff
like that as you can see it's a lot of metal d-rings and a lot of snaps and extra fabric and
loops and everything like that but it was it's actually a pretty comfortable helmet it does get
some hot spots along with the pads and stuff like that and which is why they eventually went to the
suspension one as well and the fact that these tended to tear out pretty easy the foam just
wasn't durable enough for battlefield conditions this one I got brand new actually it's unused and
it's got a Gen 1 liner and it's the paratrooper variation or according to the tag from the
Canadian government when this was demilled it was rejected because it had some paint chips on it
brand new helmet it's just got some chipped paint on the outside so super super glad to have this
one because it really should be in a museum if you want to see more of this helmet I want to see
it without the cover and stuff like that because in these historical comparison videos I do them
as they would have been used so if you want to see this without its cover or you want some more
historical information and stuff like that I have it in my helmet playlist if you want to go back
and re-watch that and learn some of the stuff about it feel free to go do that so but eventually
the Bardet had some problems and stuff like that and it had some conundrums and so the Canadians
went back to the drawing board and they came to CGF Galet and they wanted to go back to
their original 90s tests and mash together all the features they like from the PASGAT and the
French F2 helmet and the Orlite and all this other stuff and eventually they came to the conclusion
like this and they invented the CG 634 now the CG 634 is still the current issue helmet of the
Canadian forces it's very reminiscent of an ACH it came out in the early to mid 90s I think 94
was when they started being mass fielded so it was way ahead of its time this is back when the
US is still using the PASGAT had this awesome liner which is very reminiscent of a French F2
which is also in this playlist because they were used by Canadians to a limited extent
in some peacekeeping missions so here you can see the liner and the chin strap now these older ones
all right are going to have a kind of rougher Kevlar on the inside well not Kevlar these are
made out of spectra but it's basically Kevlar and it'll have a black rubber rim as you can see here
this black rubber rim if you could hear that squeaking as well as a lack of there's a little
foam pad on the new MSA ones that cover up the screw so you don't accidentally poke yourself on
the screw or anything like that but other than that the only difference was in the covers and
the cover here is a much thicker fabric than the later ones and it's the older gen 1 version of
CADPAT as you can see it's kind of blurred edged there's not really hard lines on it
and there is a wider dispersion it's a little bit brighter green overall than the later ones
so but these were made by CGF Galet which is a subsection of Galet of France these are made in
Canada CGF Galet is in Canada and in recent years they were bought out in the like 2000s they were
bought out by MSA which is an American helmet manufacturer who manufactures a lot of safety
equipment construction and logger helmets and ACHs for the United States Army Navy and Air Force
so they bought out CGF Galet changed the design a little bit to be more like the ACH still the
same shape still the same material but it's got a little bit more modern features on it and stuff
like that a little bit a few changes aesthetically mostly but that's it so we'll bring that one up
here now I'm actually well we'll wait because before MSA was bought out CGF Galet was bought
by MSA the Canadians were on peacekeeping missions in Yugoslavia where they were giving
American PASGAD vests and American PASGAD helmets now this is an American PASGAD helmet I'm gonna
apologize in advance because it doesn't have a PASGAD liner in it I took it out and replaced
it with the Marine Corps Gen 1 lightweight helmet liner which is pretty much just an
upgraded PASGAD liner it's pretty much the same thing except now it's synthetic leather instead
of actual leather and it has this mesh crown instead of the the normal webbing strips with
the donut ring because it's just more comfortable but this is an actual PASGAD helmet just to prove
it to there to you you could see the I don't know if you can oh there there it is if I get this out
of the way the unicorn tag there it's an actual PASGAD it's a lot thicker than the Marine Corps
lightweight helmet I just like them the suspension better because it's a lot more comfortable I'll
have the helmet cover locked in but this is the helmet cover they would have used and they used
these during the Yugoslav civil war when they were down there on peacekeeping missions just
the standard American PASGAD if you want to learn more about that I have a playlist I have a PASGAD
it's featured in a bunch of my helmet videos you could go check those out if you would like to
learn more history and use and some technical specs and stuff like that on the PASGAD so
but then after that the Canadians went back the Canadian standard army was still using
the CG-634 but those on the peacekeeping missions it was a lot easier for the U.S. to just supply
them rather than the Canadians because there was very few Canadians over there and the U.S.
was moving so many supplies anyways they're like might as well share so here we have here is the
CG-634 in its most current configuration well I shouldn't say most current configuration because
there was one that was one newer model than this but it was later redacted and went back to this
model and we'll cover that here and we have the CG-634 this has the desert cad pat cover on it
as you can see there's more harder edges it's not quite as a blurred and we'll get that up here
you see this how there's kind of blurred or rounder edges on this and these are more hard
lines as you can see they're more square just for that comparison as the cadex helmet mount on it
the brown cat eyes this to spot the gen 2 CG-634 from the gen 1 CG-634 is it will have a green
rim on it rather than the black rubber rim and it's not rubber anymore it's kind of plastic
and this little pad right here if you can see that this little pad that covers up the screw
that's in there otherwise there isn't much of a difference to these helmets they weigh the same
they're made out of the same material just a little bit different the tag on them though
is inside the ears underneath the cover here and this one will say msa on it whereas the older
ones will say cgf galay and it'll say it in both english and french and these are both medium which
would say moyen in french and stuff like that and everything so we'll move on to our next helmet
now that helmet was used through iraq and afghanistan and pretty much everywhere else
some early troops sent to afghanistan and stuff like that before the canadians had supplies
figured out were actually using french helmets and now i doubted this for a very very long time
all right until somebody showed me a picture and i'm sorry i don't have the picture
but this is a french f2 helmet with a cad pat cover with a cadex helmet mount and it's a pasgat
shell basically with what's pretty much a cg634 liner but it's the french f2 liner and it has a
french f1 chin strap now this came with the french f2 chin strap but i like the f1 chin strap better
and basically the only difference between the f1 and the f2 chin strap is the f1 chin strap has
these cool snaps to cover it whereas the f2 has a big long a little d-ring here and a big long
piece of velcro that would go through the d-ring and come back around on top of the chin strap
which i just don't like i'd rather have the snaps and the velcro but other than that it's pretty
much the same thing a leather chin cup and stuff like that and i've seen some canadians or what
appeared to be canadians they were wearing cad pat and stuff like that using this helmet which
gave me a little bit of weird feelings because some guy swore up and down and finally he was
able to prove it to me very very limited numbers though i don't know if they were special forces
or if it was just something they thought it was funny and they were taking a picture
uh sharing stuff like that but i wouldn't think that a cover a cad pat cover would fit on a
pasgat it turns out there was actual pasgat cad pat covers made uh field made for the most part
this is an aftermarket chinese one um as you tell because the colors are a little bit off but um
they were used um to an extent a very limited extent i think until supplies came about and
this helmet was probably used because there's a lot of problems with the cg634 chin strap
and suspension as far as it cutting into your forehead and the chin strap just adjusting on
the fly to the point where the helmet can fall down over your eyes and block your vision or
rotate and block your hearing and just interfere with lots of your body armor and weapon systems
and stuff like that so that's why i'm guessing this was used for a little while so because people
didn't want to didn't have the know-how or the time to modify the cg634 to make it better
which is going to bring us into our next version of the cg634 um which is a uh kind of weird one
um now this isn't a cover it would have been issued with but again it has the kdex helmet mount
um uh this this just i have a whole bunch of kdex helmet mounts because i got a whole bunch
of them in a shipment and i don't have one of the weird uh canadian mounts that has the
metal ring and the two the two tails that come down with the hooks i'd very much like to get
one of those if any of you guys have them but this is a version of the cg634 that's no longer made
um but it was made to deal with the suspension and chin strap problems um it's basically a cg634
shell that was gutted and filled with ach pads so as you can see here still has a cg634 chin strap
um but it has ach pads in it um which kind of helped as far as logistics goes because they
just get these from the united states it's a lot easier for troops in the field to maintain and
repair because you could just change the pads rather than having to try to sew the chin strap
and that plastic ring and everything and all the other complicated pieces that could go wrong in
the cg634 suspension this is a lot easier to maintain and take care of so i just threw a
reversible um m81 and m94 uh helmet cover on it uh no foliage loops or anything just what would
have a cover but other than that uh this helmet was tested for a little while it was found that
it wasn't really worth it to convert a whole bunch of cg634s to this the canadians pulled
out of afghanistan in 2014 uh this helmet got tossed to the wayside it was tested it was issued
um it was used for a little bit a lot of soldiers were purchasing stuff like this anyways uh
purchasing achs to use anyways just with cad pat covers um because it was a better helmet overall
than the cg634 it was just the cg634 was too much to maintain in a battlefield uh environment
over an ach so that's why the canadian government went to test this version of the cg634 found out
it wasn't really worth it the war was coming to an end anyways and they ended up going all the
way back to just the regular old cg634 and this is how the cg634 is currently issued um
except without the desert cover so hopefully you guys like this video um this is kind of a quick
little comparison i didn't want to get too long all these helmets have their own history and stuff
like that if you want to go check them out in their own videos uh in their own play in the
helmet uh playlist uh thank you so much for watching uh hopefully you guys like this video
and you subscribe if you like this sort of thing um i'd very much like you to get some user
experience if you have any user experience with the cg634 or if you just think it's cool
or something like that please throw that in the comments i've done my best
to do research on these things but i am able to make mistakes as well
so thank you so much for watching i'll see you guys in the next video bye
