What happened to this poor table Satisfying restoration

Antique Art Deco
12 followers
26 Video Views·May 25, 2026
In this video I rescue an old trashed table with missing drawers. I make 4 dovetailed drawers and a new top from scratch.
AI Generated·May contain errors
Video Summary
AI GeneratedA woodworker restores a heavily damaged vintage table by salvaging original wood for drawer fronts and crafting a new tabletop from reclaimed scaffolding boards. The process involves structural repairs to the legs, the construction of new dovetail drawers, and a meticulous finishing process using walnut stain and mahogany wax to blend new materials with the original patina.
Hi there! It's a lovely table, isn't it? It only has two problems. The top needs to be replaced
because it's completely busted and it's full of holes. There are some chunks of wood missing.
It's missing four drawers. But on the plus side there's some vintage chewing gum in mint condition
and of course you've got your usual small chunks of wood missing from the legs and things like
that. I might have bitten more than I can chew with this one but let's see what I can do.
How deep is this? Here's what I'm thinking. Because this top is just so damaged and there
is woodworm damage and all sorts of issues with it I just don't think it's worth trying to save
it because it's not gonna look great. I'm thinking that I'll use the wood from the top and try to
make the drawers from it or at least the drawer fronts so it matches the legs and the bottom
of this table and I'll try to find some reclaimed wood and make a completely new top from scratch.
Looks like the top is attached just with these pieces of wood and some screws so it should be
pretty easy to take it off. And I just want to say that even if it doesn't look like that in the
video this top was beyond saving. All right let's save this vintage chewing gum a bit crusty.
Even the underside of this table is just terrible and it's got lots of holes but I think
this section after planing and this section I think I might be able to use it for the drawer
fronts but the rest of it is just not great and it's actually a bit crumbly so I don't know if
I'm gonna use it for the sides of the drawers. At least I'll save what I can for the drawer fronts.
I wonder if this is the original carpenter who made this table. Probably not. There's a crack in
here so I'm just going to inject some glue and clamp it. This drawer stopper is broken in half
so I need to replace the whole thing. So what I'm thinking is that I'll cut it to more manageable
pieces and I'll actually cut out the piece that I think I can use. Not sure you noticed but as I was
flipping the top upside down it almost broke in half so that gives you an idea what I was working
with. It was very graceful. So this is where the joint is between this board and this one. I'm
gonna cut this off and save this bit and I think all the offcuts I'm gonna use for repairs because
there's lots of little pieces of wood missing so the wood matches the rest of the base of the
It looks like it's about to break at the joint. That was easy. I think once I put this through
the planer I'll be able to use this for the drawer fronts. There is a little bit of woodworm damage
but that's okay. I can work around it. There are a few bits like this that I need to fix. All of them
on the legs or here. There's one on the other side so I'll use the offcuts to do this now.
This is the longest video I've made on my channel so far and I did lots of other little things
off camera and I didn't record all of it because it was just too much and definitely the most
woodworking slash carpentry I've done on a project up to date. If you can hear ringing in the
background that's me waiting to find out what happened to my package because I'm waiting for
my thicknesser that's supposed to be here five days ago. I'm just going to use a piece of tape.
This should be plenty. This is exactly the same thing on the other side. I'm going to be cleaning
and sanding this whole table so I'm not really worrying about the glue at this moment. There's a
large chunk missing from the leg. I actually really enjoyed making all these repairs and it was a nice
change from working with veneer. This was a very challenging project and I did some things I hadn't
done until that point and I think I also used most of the tools in my workshop to complete this.
I also bought some new tools and this is why it took so long because one of them took almost a
week longer than expected to arrive. I actually thought that there was a missing piece of wood
but it's actually not true and if you look at the other side this is supposed to be round
but I think they just messed up so they made it flat too much. This surface...
Look at the other leg. See? This is round and it's just a little bit below this surface
so they just messed it up on the other side so I'm not going to fix it.
So even though this looks like it's worn out and it's meant to be round I don't think it's meant
to be round. They just made a mistake. I started fixing this thing so I think I'll just leave it
and I'll make it round but I'm not gonna do anything about this. This is the day after. The
glue has had plenty of time to dry. If you hear any noise in the background there's a man fixing
the fence because there was a storm in the UK and yeah the fence didn't survive exactly.
It needs some mending. So now I'm basically going to shape these so they match the contour of the
leg. I'm going to use my block plane for this one because it should be quite easy and this is just
to take most of the material off. I'm going to finish this with sandpaper. I've got this sanding
block that will follow the profile of this leg which will just make it super easy. I think this
is good enough. This is going to be exactly the same process. All right another one done
and here is the biggest one. So I'm getting close to the final shape and I'm going to use this funky
device that actually I got from one of you guys. This is off my Amazon wishlist and I haven't
actually used it until now so I'm pretty excited and this is a sander that you can use for things
like this. It will adjust to the curve of the leg and hopefully will just sand it so it's all nice
and as it's supposed to be. Let's give it a go. It's pretty cool. I found more vintage chewing gum
so my plan is to use white spirit and steel wool and give this a good cleaning. So some of the
varnish will come off because it's really flaky but I don't want to just strip it to bare wood
because this is just not the project and the idea that I'm saving the top would defeat the purpose
if I just removed everything if you know what I mean. So let's see how well I can clean this.
Looks like a lot of the varnish is coming off. It means it just isn't good enough to stay on it.
I know that most of you would be very unhappy if I just made this look new which I could.
Not on this project. This is a table that has been through a lot and I think we need to preserve a
little bit of it because it just gives it the character that it's got. So let's see if I can
find a sweet spot but that's after a lot of cleaning. I don't know if you can see this but
varnish on the bottom that is completely gone. It's got completely different colors so this is
much darker. Someone has engraved some stuff. Looks like there is a little cloud with rain and
whatever this is and someone put their name on it. Is this patina? Do I keep this or not?
This is incredibly dirty. I vacuumed it but I need to give it a good clean because
there is a lot of dirt. I don't want to get it too wet but I do need to clean it
and I've got the heater going so hopefully this will dry quickly. All right, the fun part now.
I'm going to measure the insides of the drawers and count the boards. I'm just curious if they
are exactly the same. More or less. This is one of the boards that I'm saving and I'm gonna try
and make the drawer fronts from this one. I was actually able to salvage enough wood from the top
to make the sides and the fronts. I just needed to find a bit extra for the backs.
I got the boards cut more or less to length and I'm gonna cut them to width and as you can see
there's some holes and the edges are not great so I'll cut them off. Let's do that.
I've got these cut to the right width and as you can see they go in no problem and this is
not very square so it's not gonna be perfect and I'm actually not going for perfection as you can
see with the rest of the table. It's meant to look old and used so I don't worry about it but
I just need to cut it to the right length right now because they are still a bit too long. I
decided that even though the rest of the top is in a pretty terrible condition I'm going to use
this for the sides of the drawers because they won't be as visible and this way I can use this
and keep it as part of the original table. So this is what I'm going to do for the top. I got a bunch
of reclaimed pine boards. These are scaffolding boards. They're really thick but I don't know if
you can see them but they're a bit cupped and I'll need to plane them because they're just not
straight. So that gives me a little bit of wiggle room. Obviously I'll cut it to size and make some
beveled edge or something like that but as you can see even though these are not the original boards
they have seen things. I need to plane all these so they're exactly the same thickness
because otherwise I won't be able to cut the dovetail joints. As you can see one side of
these boards wasn't even planed so this is super rough so I will plane this so it's a bit easier
to work with. I guess that was a little bit of a spoiler alert because I'm going to cut dovetails
and yes I haven't done it before so this is gonna be fun and if this looks like it took a long time
that's because it did. So these are all the sides for the drawers and you still have that worn out
vintage rustic look but at least they are flat and straight. I basically had to use one of these
boards which are much much thicker because I didn't have enough to make the backs of the drawers
so I have to plane them down almost half of the thickness. My bandsaw isn't great for resawing so
this is why I'm doing it this way but obviously there are other ways you could do something like
that. Two thousand years later. That took a minute but I've got the drawer fronts, I've got the backs
that I made from one of these boards and I've got all of the sides and now I just need to make a lot
of dovetails. These are guide bushings for router bits and I just need to pick one that will work
with my dovetail jig. I was actually going to use my bigger router that's half an inch but
it doesn't fit in this jig. I finally managed to set it up perfectly and I can start making the
drawers. I've made this contraption, I've suspended the hose from my extractor and I've connected it
to my router and put the clips on to keep the cable tidy so it's not getting in the way
because I'm a professional. And look at me go making dovetails. That was actually quite fun
once I managed to set up the jig. Look how nice and tight it is. Maybe actually a bit too tight
because I still needed some space for the glue but very happy with this. Now I just need to cut
the rest of them and Bob's your uncle. If you want me to make a separate video on how to use this jig
and how to set it up because it's actually not that simple I can do that. I used this piece that
had a hole in here but I placed it just in between here so it's not in the way and it worked out
perfectly. So that was fun. I've just finished cutting dovetails for all these four drawers.
I still need to make bottoms for them and obviously glue them together but this was the
first time I've ever cut dovetail joints and it's a good thing that I'm a professional because
it could have been a disaster. I'm just kidding obviously. But it was a lot of tweaking to set it
up properly but once I actually got it to a point that it gave me a consistent result
it was actually pretty fun and I enjoy doing it. It's pretty funny because my workshop is
hardly big enough for me to put this board through the planer. I've got just enough space
because I moved my table saw a bit back and I just need to check if there is enough space
on the other side. Oh well. Let's do this. You haven't been here in a while, have you?
For those of you who've been wondering if Mambu is doing okay he's perfectly fine.
I think it's just a bit cold so he doesn't come over to the workshop very often.
So this is extremely annoying because I can't move my table saw far back enough
so I can actually trim the edges. So I need to use my planer saw and a truck. I guess it's a
good thing that I have it. I mean I could have opened the garage door but it was cold. All right
I've got all the edges nice and straight and I can actually glue the boards together now.
And yes they are looking a bit rough but this is the look we're going for.
This is a big glue up and long boards. So to make it a bit easier I'm going to use dominoes.
This will allow me to line up the boards and to make sure that it's not all wonky. So now I'm
going to mark where the dominoes will go. Is anyone keeping track of how many power tools
I've used so far? They are mostly for alignment but these are long boards so I'll probably do one
two three four. I definitely didn't need a speed square to make those marks but you know I'm a
professional. In case you're wondering cutting dominoes is just as fun as you think it is.
I'm just making sure I get all the boards the right way around so the dominoes line up.
I made the holes loose so it's easier to put them together but they are tied this way.
I'm basically doing it just to make sure that this is all flat. The glue will do the
gluing and it will keep the boards together so nice. I forgot to cut holes on this side.
It's a good thing I'm a professional is it? A few moments later. By the way I'm using these
small dominoes because I don't have a bigger cutter. I need to get one. That's all I need to
align the boards. Are you surprised this actually works?
Because I am a little bit. I just need to clamp this together and Bob's the uncle.
I'm just clamping this down to make sure it doesn't cap. That wasn't stressful at all.
I got bags underneath so it doesn't stick to the table and make a mess and I'm gonna leave
it overnight and I'll go get some plywood for the drawer bottoms. This is the next morning
and it looks like it's flat. And that's a good thing. We want it to be flat.
Now that I've got these sides done I'm going to cut off these ends.
I think that the cordless plan saw is my new favorite tool. It's super useful. And this is
final size of the tabletop and now I'm going to give it a nice rounded edge. I'm going to use this
one because this is a large bit and I'm going to take off a lot of material. I'll do it in two passes
so I'll do a little bit and then I'll do the second final pass. Spoken like a true professional
that I am. Sometimes when I watch my videos I'm actually surprised that I managed to complete the
project. I've got this five mil piece of plywood and I'm going to cut bottoms for the drawers.
What do you think? Any good? Do I get your approval? I think Mando likes the table.
What about the dovetail joints, huh? I think the inspector has approved my work.
I'm going to use my router table to cut grooves on the inside of the drawers so I can put the
bottoms in. So here's the plan. Because this is the front I'm going to do a stop groove so it doesn't
go all the way so you can see the cut on the side of the drawer. And I'm just gonna mark where the
bit is so it's easier. So this way when I lower the board down I know exactly where the bit is.
And yes I'm not using the original fence so there is no dust extraction and it made a mess but
that's okay. I'll give this a bit of sanding just to clean this up but I don't want to do
too much because obviously we need this to match the rest of the table. But this is how I'm going
to put this drawer together. So this is the front, that's the back and these just go here. And
obviously I will glue this. So that's the idea. So I've got all of the grooves made. I'm going to give
a light sanding on the inside and on the outside and it's time to glue all the drawers together.
I think that up to this point I made maybe two or three drawers and never made dovetails but
it's actually not that difficult. All right here's the plan. I need to glue this together and I think
I'm going to use some scotch tape so I don't need to worry about wiping the glue from the inside
of the drawers. I'm using regular wood glue not a high glue just because of the temperature in the
workshop and the amount of gluing I've got and it's just gonna be easier for myself.
I don't want to put too much glue because it's all gonna squeeze out. That's a lot of gluing.
Wow it fits!
All the drawers are glued up. I'm gonna leave them overnight to dry and I'll come back tomorrow and
start sanding the top. I've done a little bit of tweaking to the drawer to make sure it fits
because all the openings are a bit different and I need to make a drawer stopper so it doesn't
go too deep and I'm very happy with the fit. I'll need to stain this obviously to match the rest of
it. As soon as I'm finished tweaking the drawers so they fit all the openings I'm going to sand
the top and I'll get to the finishing touches. I'm going to sand it roughly with my belt sander
because this is very rough. I'm going to start with 40 grit. I am not driving to the store to
get the right size belt for my sander because I'm professional and I got it right the first time.
So now that I actually have the right size belt I can do some sanding. If you're still watching
thank you and as always special shout out to all the channel members. You guys are the best
and if you would like to support what I do so I can make more videos like this
all the links are in the description. Thank you! I'm going to switch to my Rotex now
and this is not a Rotex this is just my regular sander and I think this is the fourth sander that
I've used in this video so far. After sealing everything I let it dry for about 30 minutes and
I gave it light sanding and now I was actually able to start staining and I used walnut color
because it was close to the original finish. I'm curious to know and please do let me know in the
comments what are you guys thinking about my choices for this project and if there's anything
you would have done differently and I'm sure that some of you would have tried to save the top
regardless of how bad it was but when you think about it there was no way for me to restore it
without adding extra wood because it was missing four drawers so there is that. And because this
is a table I wanted the top to be durable and usable so that's the choice I made. So just to
explain what I'm doing the reason I'm staining this is because first of all I need to blend all
the repairs in with the rest of the table but also lots of the original varnish is gone and
it's very patchy for example this has no color and no varnish on it where this one is quite dark
so this way I'll be able to even out the color throughout the whole table and this stain is
very similar to the original color of the table but all the patina and all the imperfections
are still there you can see them and when this is all dry and finished you'll be able to see
all of it. I will also stain the inside which wasn't stained originally just to make it a bit
more fancy I guess. You know I'm fancy, right? This stain is very close to the original stain
it will just fill in all the gaps where there is no stain or no finish and just make it look more
cohesive and uniform. I'll need to add a bit more stain to the repairs so they blend in better but
I'll just let it dry a bit first. I'm just going to add extra stain to the repairs so they blend in
I've got this offcut and I'm going to make drawer stoppers but I'll make four individual ones
because this is all a bit uneven so just easier than making one long piece. I'm just going to
measure the distance between the drawers and cut four pieces and just screw them down and don't
worry about the bottom of the tabletop because I'm not done with it yet. I'm just going to put
a little bit of glue and put a screw through it and that will be perfect.
By the way this table is huge and I've got no one to help me and it doesn't really fit through
the door in one piece so I'm gonna have to leave it in my workshop and take some final photos here
so apologies but this is the best I can do. So this project was a lot, a lot of work and
it was quite challenging to try and keep the patina and at the same time match the drawers
and the top to the rest but also make it look nice and usable but I'm very happy with the result and
I hope you guys enjoyed the video and perhaps maybe even learned something new. And by the way
it took a lot of lacquer. I don't even know how many coats I did but a lot. I gave it a very light
sanding. This is the next day by the way and I'm going to apply this Victorian Mahogany
wax to it and I think that will just give it the right color and make it a bit more
vintage. I also used a little bit of repair wax off camera because there were some gaps that I
had to fill because they were just too big and I think the wax will help to blend them in a little
bit because these drawers are not on sliders. The wax will help them move in and out and it will also
age them a little bit and make them look older.
And now the million dollar question. What sort of pulls or handles do I do?
I just found these in my drawer and they are very cool and these are vintage. I've got only six of
them so I can't use two per drawer which would be ideal but I can do one in the middle and these
drawers are not very big so I think this will work. I really like these. I think they're just perfect.
Because this project is a bit special I used a brass coin with my logo engraved on it and I glued
it on the inside. I'm gonna give it a polish and Bob's your ankle. I hope you enjoyed this project.
For more videos like this give me a like and subscribe. Thank you so much for watching.
Enjoy the final results and see you in the next one!
