This unique, one-drawer desk had me hooked the moment I saw it—its strange angles, handmade construction, and even a handwritten date from 1943 carved inside. What started as a “quick flip” turned into a full-blown restoration project. I rebuilt the broken drawer, uncovered stunning quarter sawn oak grain, removed staining, and finished it with a custom Odie’s Oil blend for a soft, mission-style look.
Angie, a furniture refinisher, restores a vintage, handmade oak desk purchased from Facebook Marketplace. The project involves extensive structural repairs to a failing drawer, treating deep stains with oxalic acid, and applying a custom oil finish. The restoration balances structural stability with the preservation of the piece's historical character and unique origins.
Welcome back everybody. You know what I find funny to this day? It doesn't matter how long
I've been doing this or how many pieces I've done, it's always the little pieces that you think,
oh this will be a quick flip, that ends up taking forever. I've been working on this piece for like
a week and a half, not eight to ten hours a day or anything, but still. I picked this up from
Facebook Marketplace almost exactly a year ago. I was so intrigued by the shape of it I'd never
seen anything quite like it. I paid a little bit more for it than I wanted to. I did offer her a
bit less than she was asking and she took it. I mean it's in pretty rough shape but there was
just something about this piece. Clearly looking at it you can see that there's a fair bit of
finish damage, there's some structural stuff, a lot of staining and scratches on the top. I knew
it would take work but it's such a small piece that I figured I could whip this up in maybe
three days. That did not happen. Stay tuned. My name is Angie and I refinish furniture. Sometimes
I paint and sometimes I don't but I always do what I can to save old pieces from the trash.
Welcome to my workroom. Okay so fair warning, a lot of this video is going to be repair work.
Starting with this drawer which you can see is in absolutely terrible shape. It's literally
falling apart. I couldn't even get it inside the desk anymore because it's just falling apart at
every joint pretty much. This drawer pull is the heaviest thing I have ever seen. It's even
bent both of the machine screws so I'm not sure if I want to reuse this or not. I don't even
like it but it is original to the piece so we'll see. This thing is dangerous. Anywho, we're gonna
get to taking the drawer apart. As lovely as this piece is or is going to be, and I can tell it's
going to be nice in the end or at least I hope, it's not constructed the best. Everything's put
together with very elementary joinery with the exception of the legs but this drawer face and
part of the lower section which you'll see later, they're just individual blocks of wood glued
together and held together with this spline on the top that's only about an inch thick. So that's
kind of interesting. The sides of the drawers are basically just glued and nailed in. Very very
basic. As you can see the drawer bottom is pretty rough. All of the separate veneers have come loose
and I find it a bit of a flimsy drawer anyway. It's only about an eighth of an inch thick
so I'll be replacing that. I want something a little bit beefier. To do that it means I'm
going to have to modify the drawer pieces a bit but you'll see that a little bit later on.
Even the drawer guide is a mess. You can see it literally just snapped in half.
I'm going to try to salvage that though but just not the drawer bottom itself.
Here again you can see these sections that are just glued together. I'm not going to be reusing
any of the nails. They're quite flimsy and rusted but I am going to be reusing the screws obviously.
Now take note of the color of this evaporized right now. It's kind of a nice golden a little
bit red color. It's going to be almost black when these come out. I really like this stuff. It works
really well. Usually just leave it overnight and pull everything out, rinse it off and you're good
to go. So this drawer front is a mess. Obviously there's the broken piece but there's also all of
these other little splits that I need to deal with. Thankfully when this piece did split,
whenever that happened, it was a pretty clean break so I should be able to glue that up really
well. Now as I'm handling this I see this writing and it says July 19th 1943. Now I suppose there
could be other reasons someone would write a date inside of a piece of furniture but not likely. So
I think that this was probably written by the person who made it back in 1943. I think that's
super cool. I still don't know who made it or where it was made or even what its purpose was
but it did have that little brass plaque on the front. It was just a number so I'm kind of thinking
maybe this was military related. But what a cool little piece of history even if this was somebody's
project. Now as I'm doing these repairs you'll notice I'm using a couple different types of glue.
I'm using regular wood glue here. This is a I believe tight bond something or other. I'm using
this particular glue anywhere I want a permanent fixture, a permanent joint or a permanent bond.
In some of the other joints I'm going to be using hide glue. Hide glue is reversible. It's going to
make it a lot easier to repair down the road if this needs repairs down the road. On areas like
this I want this to be a strong and permanent bond so that's why I'm choosing to use regular
wood glue. Now for this section of the drawer slide that is broken I could recreate this piece
pretty easily with a table saw but the way it broke and also the fact that it actually gets
glued to the drawer bottom I think that I'm going to be able to salvage this. I just need to make
sure it's lined up really well. Clamping this is a little bit awkward just because of the way it's
shaped. I need to be able to keep it flat so I have to clamp it down to these two boards here
but I also need to be able to bring those two pieces together and I'm going to use a clamp
here and here to do that. Not the easiest thing but we good or done. Now this is one of those
projects I like to refer to as a whole nine yards project and that pretty much means I'm touching
every part of this piece. Everything is going to be disassembled, everything is going to be cleaned,
sanded, re-glued. So I'm starting here with the drawer pieces. If you guys have been following
me for a while you know some of my pet peeves by now one of them is when you have a beautiful piece
on the outside but no attention shown to the drawers and another is when the insides or
undersides aren't taken care of so I'm going to be doing it all in this video. Now a couple of
the splits on this drawer front were not worth breaking it apart and re-gluing it. I just tried
to get as much in there and you can see I've got a little bit of squeeze out here so it's going to
work. I need to make sure this stays as flat as possible. I've already noticed that the shape of
this drawer is a little bit funny and I guess we'll see once everything's done how that fits in.
I'm not sure if it's just the wood having you know expanded and contracted so many times over
the years that it just kind of moved that drawer face out of whack but we'll see what we end up
with here. But now let's disassemble the rest of this. Pro tip anytime you're taking something like
this apart especially if it's kind of weird construction grab a pencil or some painter's
tape and a pen and label your pieces so you know exactly where they go. Especially on handmade
pieces like this there's no uniformity from side to side meaning that this piece will only fit
properly in this corner. I'm kind of laughing watching this footage back now because that
little driver bit that I have is so short. It's a number three Robertson which is a really big
square and I don't have a long one or I didn't. It could barely reach the screws in here. I actually
I think it was the day after this I went out and I bought a set of longer driver bits. Now I've
never actually seen a piece put together quite like this. They have a groove. Whoever made this
loved splines. So there's a groove in the top section and a groove on the sides and a spline
in the middle to just put it all together. But it's all done in a 45 degree angle so that's
pretty neat actually. So just like the drawer front these pieces are made of small blocks of
wood held together with a spline and they're pretty rough. A lot of the glue has failed
just like I did with the drawer face. I gotta fix all of those. So the leg assembly is basically just
dowels and glue with the exception of course of where it attaches to that top section.
Speaking of the top I'm going to do some repairs here as well. There's a little bit of a split.
It doesn't go all the way across so I'm just trying to wedge it open, shove as much glue down
there as possible and then I'll be clamping that back up. Again this is a situation where I prefer
to use some form of wood glue rather than hide glue which I prefer in joints. Now I have to be
really careful here because you can see that the bottom of the top here comes down to a point and
I don't want to crush that with this clamp. So I did a light sanding on the back side of this
drawer face and I wanted to make sure I left enough of this date that was written there that
I could recreate it. So when they initially signed it obviously the pen made an imprint in the wood
or an impression in the wood. So even after a light sanding it was still visible so I basically
just retraced it. You know just one of those things I didn't have to do that but I thought
it was really cool because most likely it is the date that this was made and I wanted to save that.
There wasn't a whole lot of finish left. What was there I'm pretty sure was actually shellac
so I just used a scraper to get the majority of that off and then I went in with a light sanding.
Now how I sand depends on the piece. In situations like this I'm not sanding to get every single
mark and ding out. This piece has history I mean look at it. So if there's a few little scratches
and nicks here and there that remain that's totally fine. I'm honestly more concerned about
actual damage and you can see there's a lot of staining on the top that I'm going to have to
address. That's more what I'm worried about. I am going to be hitting this top with some oxalic
acid but to do that I need to get down to the raw wood so a light sanding here as well. I believe
this is 120 or 100 it might be 120 actually. Usually on solid wood pieces like this I'll do
120 only going lower if I have to. On veneer I like to start a little bit higher like 150 and
180. So there's a few little water marks here after sanding. You can see there's a bit of a
dark stain here. I'm not really sure if that's going to come out or not probably not but I'm
going to give it a go with the oxalic acid anyway and actually you can see here what the natural
color of this beautiful cortisone oak would be if I just put a clear coat on it. It's this lovely
warm golden yellow color. This is what it looks like after the oxalic acid has dried but I can't
just go in and sand that because there's little oxalic acid crystals everywhere so it needs to
be rinsed really really well. This is an important step of using oxalic acid. You go down to the raw
wood, apply the oxalic acid, let it dry, rinse it really well and then let that dry extremely well
especially if you're putting a finish on something. You always want to make sure you're using gloves
and breathing apparatus doesn't hurt. So here is the perfect example of little marks that I'm not
terribly worried about. On a drawer face or vertical surface I don't really have to worry about these.
On the top however there were a few marks like that that I did fill with a little bit of wood
filler because I don't want anything that's being used on the top of this to get into those holes
but it's not as important on things like drawers, the sides of a piece and they can really add
character actually. So you can see here that the oxalic acid did take out some of the staining,
not all of it, there's still a few marks and that sort of circular stain stayed as well but it did
lighten a bit. Remember how light and golden that evaporous liquid was? Yeah it is black now but
what's nice about it is it can be reused so I'm just going to use a coffee filter and get rid of
any particulate that's kind of in the bottom of it and pour it back in the jug and use it again.
So here I've just done a dry fit, this is after everything is sanded and repaired. This is always
a good idea especially if you've got multiple parts and it's a little bit confusing. Do a dry
fit, relabel things if you need to but it's important to do that before you just go at it
with glue because you get in the middle of a glue up and you realize you've got the wrong leg. It is
not a good day. So as I mentioned earlier here is where I'm switching glues. I'm going to use hide
glue and again the reason for this is it's just a lot easier to take joints apart down the road
if they need repairing. You could use a wood glue here, I've done it in very specific situations but
for the most part hide glue is the way to go on something like this. It's just going to make any
future repairs so much easier. By the way if you are enjoying this content please feel free to
leave me a comment, let me know what you think of this project. If you want to see more feel
free to subscribe, you don't have to, I'm not gonna force you but subscribing and making sure
that notification bell is turned on is a great way to make sure that you don't miss any upcoming
projects. Don't forget too I do have my other channel which is Transcend Furniture Gallery
Unplugged. I only launched that about a month ago, it's doing really well so far. I think there's
four or five videos there now and it's basically just a completely different way to view my content.
Not everybody watches these videos to learn, some do it just to relax. So while you've got
voiceovers and music and it's a little more lively here, the Unplugged channel is basically just shop
sounds so you hear what I hear when I'm working. There's no voiceover, it's very minimal music,
and it's just kind of a more relaxing experience. So I didn't want to use full quarter inch
plywood for the bottom, it's just a little bit too thick but 1 8th is a little bit too skinny.
So I actually bought a sheet of 1 8th inch plywood but it's not really 1 8th of an inch,
it's a little bit less than that. So I glued two together which gave me a much firmer panel
and it's just a little bit under a quarter of an inch. Now here's the problem,
these are all routered out for the 1 8th inch panel so I need to redo these to accept the
new drawer bottom. Now moment of silence for my little makeshift router table that you see me
setting up here. This did really well for me for about I think about a year and a half I've had it.
I don't do a ton of routing or at least I wasn't doing a ton back when I created it and I just
have a little trim router on the bottom but it basically just clamps to my work table and then
my fence in quotations is this board that's on a screw so it swivels and it lets me figure out
what measurement I need. I did go out and buy an actual router table, a very inexpensive kind of
entry level one on a stand, something a little bit of a step up from that but still nothing quite
crazy in terms of expense or size. That's basically how I've built this workshop around me.
One piece at a time and just upgrading when I'm able to. So I'm just kind of laying out what I'm
going to do here. You can see these old nail holes. I am going to reuse them but I'm also
going to add some pin nails which is going to help these pieces stay in place while the glue dries
and I can get those couple of nails back in. I'm using hide glue here as well. Nailed joints like
this generally don't hold up forever obviously. It's not as secure as something like a dovetail
or other joint so to be able to take this apart easily without breaking the wood is important.
As far as the drawer bottom goes, it's plywood not solid wood so I don't have to worry about
the drawer bottom expanding and contracting too much. I do a little bit here on this front face
but it's not a very large piece of wood. The movement is going to be minimal. I did use a
little bit of hide glue there in that joint or groove rather but I didn't use any in the grooves
on the side panels or the back which is going to sit on top and nail in from the bottom. I did use
a little bit of hide glue on the sides here that hold the back piece in though and as you can see
the pins just hold this in place until I can get the nails in without it sliding all around.
And then just a few little nails here in the bottom and we've got a lovely brush and solid
drawer. Definitely do not regret my decision to replace this bottom.
So time to add the leg assembly back to the main part. Also these glue blocks that were
originally underneath, I'm going to reattach these as well. It's just going to help make
this drawer even stronger. Now as far as this wooden drawer guide goes, it did glue up pretty
strong. I can see where the old holes were and I also added some hide glue to the bottom of it so
it is physically glued to the bottom of the plywood. Then this gets nailed back into its home.
I also added a little bit of hide glue just for some extra stability. Okay now the finish. I'm
going to be using some Odie's oil and a safer solvent and some of their pigments to basically
make a custom finish. These two pigment colors together create a very warm and beautiful mission
oak kind of color. Maybe slightly lighter, it just depends how you mix it. I love using these
pigments because you're in complete control of the opacity of the stain, the color of the stain,
and it smells so good. I don't have to wear a respirator and clean my shop top to bottom every
time I use the stuff, unlike lacquer, and I always just sort of eyeball this. You can do exact
measurements if you go to the Odie's oil Instagram or Facebook page. They've got tons of videos
about what ratios to use. I usually just wing it. I've done it enough that I kind of know what I'm
going to end up with by this point. To apply it, I'm going to be using a non-woven pad. Sometimes
I use these Merck and Milan pads. It doesn't really matter, it's all basically the same thing.
Now I love the light color here. The problem is, if you remember when I did the oxalic acid,
this isn't the natural color of the wood. A lot of people look at wood like this and say,
oh my gosh, you should have just clear coated it. It's so lovely light. Well,
it's not going to stay light. This color that I'm applying is actually really close to what
the natural color would be. It's just slightly darker. And the reason I'm going slightly darker
than the original is to try to camouflage the few little stains that remain. Now I don't actually
show it in the video, but after the stain has set for a couple of days, I will go in with another
coat of just the Odie's oil, just for a little bit of added projection.
Now I use the same stain on the drawer inside and out, so it's all kind of uniform now. And I
am loving how this looks. So with Odie's oil, even with the stained pigments, you apply it,
you let it sit for a bit, and then you rub it off. And when I say rub it off, you buff all of it off
as much as you can. Anything that hasn't really bonded with the wood gets removed. This is a
fairly common thing that people using Odie's for the first time run into. They use way too much.
You use so little because using a lot, number one, it makes it harder to remove. And number two,
it's a waste of money. You only need a little bit and buff it all off completely.
Now, of course, me being me, I had to also do the inside and underside. I just prefer to have
everything sealed uniformly. Look at this wood grain. Now, again, I am, like I said, going to
add another layer of Odie's oil in a couple of days once this has had time to really kind of set.
But yeah, this piece is beautiful. So remember that hideous old handle? I need to figure out
what I'm doing with this. I need to figure out if I'm going to use it, if I'm going to replace it.
It's practically a baseball bat, but it is original to the piece. The holes are already
there, so I'm probably going to reuse this. Quick shout out, though, to anyone who has bought me a
tea over the years to buy me a coffee app. You guys are keeping me fed in tea and any of the
extra money goes towards buying tools and supplies for the shop. So huge thank you.
So I'm adding some stripper to this handle. I just wanted to show you the difference between
plating and paint. This is a really good stripper. And as you can see, all it's basically doing is
cleaning. This is not a spray paint, even though it looks like it's chipping and wearing off in
some areas. This is some type of plating, just like they do copper plating, brass plating,
silver plating. But this is a solid brass rod, so we're going to get down to the brass.
And the only way for me to do that is sanding. So you can see hand sanding pretty much does nothing.
This would take a very long time to get through. So I'm going to pull out the big guns here and
grab my surf prep. So because I'm not necessarily looking to make this look brand new, I don't want
to go to a high polish. I want more of a brushed brass look. So initially, I'm just going to try
to get this kind of silvery chrome plating off, get down to the brass, and then I will jump up to
a finer grit and then a finer grit from there till I get the look that I want. Once I get close,
I'm going to switch to hand sanding, which is going to make all of my scratch patterns in one
direction and give it that nice brushed brass. I can never say that. Brushed brass feel. And yeah,
I'm super happy with that. Now, if you remember from the beginning, the bolts that initially held
this were bent. So I need to get some new machine screws. The trouble is going to be finding ones
that are the right size. And it took me a few tries, but I did find two that are going to work.
Now, this little number tag, I am going to put back on. I'm not really sure what it's from.
Like I said earlier, it might be military. It could be from a school, but I'm just using a
tiny bit of Flitz polish to kind of clean this up a bit. I don't necessarily need it to look brand
new. I want to leave at least a little bit of tarnish, but definitely want to clean it up.
Now, the nails that initially held this were so rusted, they actually broke off while I was
pulling one of them out. So I'm adding some new brass nails. Now, initially this hung a little
bit crooked. I'm going to try to straighten it up just a little bit while still covering that
light area where it was before. Now, you guys know me. I'm a perfectionist. So there were things about
this piece that bothered me initially and bother me still because it's a handmade piece and it's
not perfect. The drawer itself is a little bit of a wonky shape. It slides in and out perfectly.
The drawer itself is very solid now. It's more so that it just doesn't have that nice, crisp,
even gap all the way around. But you know what? I'll get over it. I mean, looking back at what I
started with, this piece was really a mess. It was trashed. So all things considered, I'm super
happy with how this came out. Make sure you guys let me know down below what you guys think of this
project. If you have any ideas of what this piece may have been used for or where it was made,
let me know. As always, thank you so much for watching, enjoy the reveal, and I'll see you next time.