Refrigerator Not Cooling - What to Check

Pattern Smarter
107 followers
264 Video Views·Oct 28, 2022
Hi guys, what I want to show you right now is how to test the thermostat on your refrigerator.
Now this is mainly going to apply to say a top freezer refrigerator that only has
one temperature sensor that can detect temperature and that's going to be in
the refrigerator compartment. So what you want to do is gain access to the actual
thermostat control and this is what it's going to look like behind here.
And most of the time they're going to have two wires coming off of them.
You have the main power wire and then you're going to have another wire that runs over to
the defrost timer. Now the defrost timer is what sends the voltage to your evaporator fan,
your compressor, your defrost heater, and stuff like that. So this is the,
when your machine is not in defrost, this little piece right here is what's going to
cause the machine to cycle on and off. And what you may end up finding is that
say you come down in the morning, come home from work, your machine is not doing anything.
You don't hear the compressor, you don't hear the fan, the dial is turned to the regular
factory setting or wherever you have it set and nothing. It's not getting cold. No compressor,
no fan. So the first thing you want to do when you discover that problem is go ahead and make
sure the machine is not in defrost. And how you're going to do that, and I can show you on this here
real quick, let me grab my flathead screwdriver before I show you, is you're going to want to
find the defrost timer, which is this piece right here. That's your defrost timer. Now,
when the machine goes into defrost, it's going to shut the compressor and the fan off.
What you want to do is take your flathead screwdriver where the dial is and go ahead
and turn that and make sure that it's not in defrost. Now this one here is now out of defrost.
If you stick your screwdriver in there, you turn it and everything comes on, the machine
was in defrost. Now your refrigerator is going to go into defrost three times a day.
So if you have a no cool problem where it's definitely too warm, your stuff's thawing out
in your freezer, and you turn that and it comes out of defrost, you may have a bad defrost timer
and it was just stuck in defrost and it was never coming out. You have just turned it out of
defrost, now everything's going to start getting cold again. What you're going to want to do is
replace the defrost timer. But if you turn a dial and it's not in defrost, no compressor,
no fan, not in defrost, you want to check this right here. Now what this does is basically this
opens and closes. Opens a circuit, closes a circuit. So you would want to disconnect your
refrigerator from the wall so there's no power. You can test this here with ohms.
On these two terminals right here, I'm going to pull the plugs off.
Now with the machine in the on position, this should be a closed circuit. Let me find these.
That should be a closed circuit. Voltage should be able to go from here to the other terminal
back there with no problems at all. When you cut the refrigerator off, now there's no continuity
between these two pins right here. So if you have this into the on position, your refrigerator
is not getting cold, it's not in defrost, fan's not running, compressor's not running,
and there's nothing going on between these. You have open circuit between these two pins,
then you have a bad thermostat. So that's what you're going to find. You're either going to
find you have a bad defrost timer, it was stuck in defrost, or this is bad, which is pretty,
I won't say common, but it happens. It happens. One of these two is usually the fault. Whether
it might be stuck in defrost, you go ahead and spin this and everything comes on. You're like,
oh look at that, it's back on. Your timer was bad. It went to defrost and stayed there. Never
wanted to come out. It's only supposed to be in defrost for maybe 20, maybe 30 minutes. Then it
comes back out and it usually doesn't affect the temperatures. But if you definitely have an issue
where the freezer stopped freezing and your refrigerator is not cold, you turn that dial,
everything comes on, you got a bad defrost timer. But if you turn that dial and it still doesn't
come on, check your thermostat. You should have a closed circuit between these two pins when it's
in the on position. Unless of course it's as cold as it needs to be, then it's going to open up,
but chances are if it's too warm in your refrigerator and this is open and it's on,
that's bad. I hope I've made this clear enough for you to understand.
Like always, if you have questions, just leave them in the comment section below. I can elaborate
a little bit more on it or actually show you. But if you put your meter on ohms, you should have a
closed circuit between these two terminals. If it's open, it's bad. So there you have it.
Like always, thanks for watching and good luck. Use common sense when you're working on your
refrigerator so you don't hurt yourself, especially when you're working with voltage and stuff like
that. But in a case like this, we're not really working with voltage. Before you take this out
of your refrigerator, go ahead and find your defrost timer. Give it a little spin just to
make sure that it's not in defrost and that's why your compressor and your fan are not running.
But if you did that, no compressor, no fan, disconnect the machine from the wall and check
this. Voltage should be able to pass from one terminal to the other. It should be a closed
circuit when the dial is in the on position. So there you have it. That's how you test the
thermostat on a regular old refrigerator. Thanks for watching.
