Spencer walks through one of the wildest chassis FFG has ever built — a supercharged 7.3L Godzilla sitting on our FF Air Chassis for a 1964 Ford F100. This thing lays frame and makes an easy 900 horsepower. Filmed at the Grand National F100 show in Pigeon Forge, Tennessee.
The customer, Mike, came to us wanting his first resto-mod. We tried to push him toward a Coyote — it's our go-to for two-wheel drive builds because of the top-end power and high RPM character. Mike wasn't having it. He didn't like the Coyote sound and wanted something with the rumble and presence of a big block. So we built him a supercharged Godzilla on airbags — the modern big block, sitting on the ground.
This is the first supercharged Godzilla we've done in a customer chassis. The Whipple 3.0L Gen 6 supercharger paired with the 7.3L Godzilla is still a new platform, and we had to develop a front runner kit to make it all work. Indy Power Products came through with the valve covers on short notice and they completely transform the look of the motor — dresses it up like a true big block.
The chassis is our FF Air Chassis, designed to lay frame on airbags while supporting the kind of power Mike is putting down. Stainless exhaust system built in-house by Ashlyn and Bryton in our exhaust department — FFG 3-inch Godzilla headers, X-pipe, resonators, MagnaFlow mufflers, and ram-horn style tips that exit the sides. Watts link in the rear, Little Shop 16-inch brake kits with Wilwood components, and a one-piece driveshaft thanks to the short bed conversion.
Mike is picking this up directly from the Grand National show and shipping it back to Indiana, where he'll handle the bodywork and paint himself. Dark blue over white two-tone is the plan. We'll feature the finished truck on the channel down the road.
If there's a specific topic you want us to break down in more detail — the front runner kit, the FF Air Chassis, the supercharged Godzilla platform — drop a comment and let us know.
PARTS & PARTNERS FEATURED:
FF Air Chassis (Fat Fender Garage) Whipple 3.0L Gen 6 Supercharger Indy Power Products valve covers Holley front drive accessory kit FFG 3-inch Godzilla headers MagnaFlow mufflers TMI T-56 manual transmission Little Shop 16-inch brake kit with Wilwood components AccuAir e-Level Plus management system VIAIR dual compressors AccuAir air tank Roadrunner Performance braided lines and fittings Boyd Welding 20-gallon aluminum fuel tank Mustang GT500 fuel pump
More FF Air Chassis content coming. Subscribe and follow @fatfendergarage on Instagram for daily updates from the shop.
Spencer from Fafnir Garage presents a custom FF Air chassis build for a 1964 Ford F100. This high-end restomod features a supercharged 7.3L Godzilla engine, a manual transmission, and a sophisticated airbag system. The project blends modern performance with a classic big-block aesthetic, focusing on precision fabrication and a unique \"lay frame\" capability.
This is a supercharged 7.3 liter Godzilla.
It's sitting on our custom airbag chassis.
It has a beautiful stainless exhaust system.
I'm going to walk you from front to back
and what led us to sitting with this beast of a chassis.
Let's get into it.
Hey guys, this is Spencer with Fafnir Garage.
We're at the Grand National F100 show in Pigeon Forge, Tennessee.
Sitting behind me is a really cool chassis for a 1964 Ford F100.
It's going to be our FF Air chassis.
It's on airbags and it lays frame, lays on the ground.
You might notice pretty big engine in this thing.
We're going to walk you from the start of the chassis
all the way to the back and kind of go over all the components,
but also kind of help you understand
what the customer's thought process was from cradle to grave.
This is a very involved project
and might be one of the coolest chassis we've ever done.
So without further ado, I say let's get to it.
So got approached by a really cool customer.
His name is Mike and he had a 64 F100 long bed
that he had found that seemed to be in pretty good shape.
He's a Ford enthusiast.
He's got some other Fords and they've been in his life
with him and his dad and he really likes them.
So it was time for him to get into kind of his first restomod.
So initially the plan was to be a long bed
and then eventually he decided that he had the ability
to turn it into a short bed
and aesthetically those look pretty good.
So we decided to go that direction,
but we normally swing people into the Coyote platform
for a two wheel drive.
Most of the upsides you're going to want
lie with the Coyote in a two wheel drive application.
Both have their place.
Both are awesome.
Just normally when we're doing a lower truck,
we like the Coyote.
It's high RPM.
You have top end power.
Mike does not like the sound of the Coyote.
Honestly, a lot of people don't.
And that's understandable.
If you, especially if you're a long time hot rodder
and you're used to kind of a big walk sound,
something a little choppier, bigger.
Coyote's almost like, leans more like JDM.
It's very high pitched.
It's very high RPM.
And they're difficult to get the exhaust sounding right.
So we tried and we tried and we tried to tell Mike,
let's just do the Coyote, put the supercharger on it.
But he did not back down and he knew what he wanted.
And he said, listen, I'm coming to you guys
because I know you can do it and I want what I want
and I'm not going to compromise.
Fair enough.
I cannot disagree with that.
And I think that more people should be this way.
So, and a supercharged Godzilla is kind of unique.
It's not going to say it's an untested platform.
It's a very new platform.
Whipple now has the three liter gen six supercharger
for the Godzilla motor.
This year is just a traditional Godzilla
that we did a little bit of work too,
but you can also do a megazilla.
Really, again, depends on intended use.
Like this thing will make such an easy 900 horsepower.
And if you wanted so much more out of it,
you know, there's the phrases,
there's no replacement for displacement.
It's a huge motor.
Literally is the modern day big blocks.
So even just in the engine setup,
a lot of really cool features.
I want to shout out the valve covers
from Indy Power Products.
Awesome company.
When Mike reached out, he lives in the Indiana area.
So where these guys are, he mentioned them to me.
We looked into them.
They seemed awesome.
At the finish line, we decided,
hey, let's go with the valve covers.
So Indy, because we were trying to get this thing done
for this show,
and so he could coordinate pickup afterwards,
had one set in stock.
They got them to us.
They helped expedite them.
They really went the extra mile
to make sure we had these quickly
in the timeframe that we needed them.
They look so cool.
They literally do dress this thing up
like it is like a big block motor.
So the intended effect that we were going for,
I would say certainly paid off.
So we had to develop a front runner kit.
That was the one untested variable
we had to make sure we could have done.
It works great.
You got the Whipple pulley,
and then the rest of this, for the most part, is Holley.
So we'll use the Holley front drive accessory kit,
and it comes with a new oil pan,
which is one of the biggest reasons we do that,
is so you can get a rear sump recessed oil pan.
I mean, you got to realize in a situation
like this, packaging is so tight.
You got to make sure that if it's going to drop
on the ground, it can clear the hood.
It's very tall.
If this was like a 3.8 liter Whipple,
if that was something they offered for the Godzilla,
I don't think it would have cleared the hood.
That's how close on tolerance we're talking.
So stainless exhaust system is the freaking coolest,
probably the coolest thing about this entire truck.
Those are our FFG headers.
They're three inch.
Godzilla, you kind of want that.
You want it to breathe.
You want it to get that low end rumble,
which is pretty fun.
That's Ashland and Brighton in our exhaust department.
They went nuts on this thing.
Then you're going to have your resonators,
tone the sound, kind of refining the sound a little bit.
It's not as sharp or harsh.
Then we run an X-pipe here, which also turned out great.
Then again, packaging being really tight,
squeeze the mufflers in here with the four links.
And then you have this really sweet,
we're talking about, it looks like a ram horn,
comes out the sides here.
And we accounted for the size of his wheels and tires.
So he's running a pretty tall wheel.
I'm a 22, I believe.
So we did a lot of testing to make sure
that there was a good clearance for what he was looking to run.
And yeah, they look amazing.
And then they curl out the back right here
and it sounds awesome.
This is our first supercharged Godzilla
that we've done in a customer's chassis.
I don't think he's that far off
from having this thing ready to go.
Fabrication, get the body on, do the body work, paint it,
put it all back together after the truck's been painted.
And then, you know, put your steering column
and pedals and all that in.
And then literally should be ready to fire
basically right away, which is pretty cool.
Anyways, got the Tremec T56 manual transmission.
Thing is so fun for a setup like this.
It is just, it's perfect.
Up here, and this is the only part of the chassis
that we're changing, is these are
the Little Shop 16-inch brake kits.
They're so, so cool.
And to be honest, if you're gonna go this far,
they're so good in price for what you're getting
that you just gotta go 16s.
They look so sweet.
Even if you go 16s front, 14s rear.
They pair with Wilwood components.
So this really nice billet piece that they make here
is how this all kind of mounts together.
So for the caliper, that's what's changing.
This is a red FFG private label Little Shop caliper.
The customer wants the Little Shop logo
because he likes the MFG.
And he wants it in a custom color.
So we're getting it painted like a really cool,
like burnt orange color.
That's gonna have a little bit of like pearl in it.
That's the only thing on this chassis
that's changing from this point that it's at.
So he's gonna get it.
We'll send him the new calipers
because they were custom color.
They couldn't get here in time.
Yeah, it's pretty cool.
So drivetrain, he's covered.
He's so good.
It's crazy.
And you need a chassis platform
to support something like that.
IE, the FF air chassis.
Simple cover on the chassis.
You're gonna have your front sway bar.
You're gonna have your power rack and pinion.
You're gonna have your upper and lower control arms.
They are designed to perfection.
It's a great product.
You're gonna have your airbags in the front
plumbed with AN fuel lines and fittings.
We really like AN because they're flexible.
They're easy to plumb and they're very reliable.
They're very, very low risk on leaks.
And there's something that's easy to work with,
which is pretty nice.
Get your bolt-on cab mounts right there.
We've talked about this in videos.
Everything's modular intentionally.
So if Mike ever wanted to adjust something,
it's kind of at his fingertips.
It's not like we welded all of this in here
and he's married to what he purchased
from us right up front.
And then for fuel lines,
we're gonna run those inside the chassis
all the way down to the fuel tank.
And then they're gonna come up to the motor
in a whip just like this.
All braided AN, all AN fittings.
So we use Road Runner Performance
for all of our lines and fittings.
They are amazing to work with.
And if you'd like to purchase stuff like that,
you can come to us.
We are a dealer for them.
We do sell their stuff, which is pretty cool.
And on the exhaust, you got the Magnaflow mufflers.
We were able to run a one-piece drive shaft here,
which is fun.
Usually in an air ride setting,
you have to run a two-piece drive shaft
with a carrier bearing in the middle.
It has to flex.
And what do you do when the chassis goes up and down?
That's just kind of the nature of the beast airbags.
But a lot of it has to do with wheelbase.
So if Mike had gone with his original plan of a long bed,
we would have had to do that.
But because it's a short bed,
we were able to comfortably do that
where we knew we were within correct operating angles
and he should be right where he needs to be,
which is pretty nice.
Back to the air system.
This is the meat and bones of how this all works.
It is the baddest, the nicest.
It's so fun to use.
So you got ViAir dual compressors.
You're going to have an AccuAir E-Level Plus management system.
So that's going to be your ECU right there.
Then you're going to have a massive air tank
from AccuAir as well.
It builds super quickly.
The dual compressors do exactly what they're intended to do.
You build air at a very quick rate.
Literally by the time you air out or you raise it up,
it's rebuilt, ready for the next run.
So on the chassis, you got the rear four link.
This is all 316 steel and it's all laser cut,
press brake, MIG welded by hand.
Beautiful, beautiful chassis.
It's heavier intentionally on purpose.
I mean, if this guy does intend to push
into that 800 to 1000 plus horsepower,
you want a chassis that's planted.
You want a good rear four link.
We put a Watts link back here as well.
A lot of times on the coilover frames,
we'll do a traditional panhard bar.
Watts link is just really nice for flex.
And it looks so cool.
It looks amazing.
You can see the stainless brake line,
how it runs around the pumpkin on the axle.
That's fun.
We do all stainless brake lines all the way through the frame.
And they're all rigorously tested.
All the lines are tested, fuel, brake, air.
You got to make sure there's no leaks
when it goes back to the customer
and that it's, again, as user-friendly
as it could possibly be.
Then we're going to have a 20 gallon
Boyd welding aluminum fuel tank.
So he should get, depending on how he drives it,
you know, 250 to 300 miles of range.
Again, depending on how he drives it,
he could get 150 miles of range.
Mustang GT500 fuel pump,
which works really well with the Godzilla.
And he's going to have his dual battery trays
so he can run batteries,
which you'll really want to run an air ride system.
One for the truck, one separate for the air ride.
Then you got your shocks back there.
You got your shock towers mounted
and your rear air bags.
And they hold great.
Like I say, these things drive,
I would say a titch more comfortable
than our coilover chassis do.
Strictly because the coilover chassis,
they're performance coilovers.
So if you wanted to take a corner really hard,
any sort of track autocross coilovers is the way to go.
If you're trying to really maximize performance out of it.
But if you want a cruiser and you want comfort
while also getting power,
this is absolutely the way to go.
And it is so freaking cool.
So plans for the rest of the truck.
I think it's set where he's going to do
like a nice dark blue and a white two-tone.
The upper half of the truck is like a nice deep blue,
dark blue, and then the lower half is a white.
Anyways, we're going to support him as best we can.
The good thing is he has some of the best bones
you can get to start a project like this.
I'm so grateful he did it.
I'm grateful that he trusted us
to handle something like this.
I personally think our team's execution was 10 out of 10.
And I think he's going to have a really fun experience
with his family building this thing.
So he joked with me that now he's just basically
going to spend all summer as his full-time job
painting this thing, painting the truck.
So it's worthy of the chassis,
which I think he's going to do a fantastic job.
And I think it's going to be a really cool truck
that you'll likely see featured later on the channel
as he works through it and he builds it.
So just wanted to highlight a really cool customer,
a really cool chassis.
Might be the coolest chassis I think we've done.
And starting this thing was such a magical experience.
We had like 25 guys in our shop
all gathered around this frame.
They just wanted to hear it.
Again, thank you, Mike.
I'm super grateful.
So this is actually getting picked up
from here directly and shipping to Indiana for him.
And he's hungry.
He's ready to go.
So I think as soon as this thing lands,
he's jumping right on it.
Anyways, if you have any questions,
if there's any specs we didn't cover
that you're interested in learning more about,
if there's any particular topics
you want a separate video on,
we're happy to do that for you.
Hope that you like, subscribe, follow the channel,
follow us on socials.
We're on Instagram, TikTok, Facebook.
We have stuff coming out every single day.
There's a lot of stuff going on in the shop right now.
So stay tuned and thank you for joining us.