The Easiest Low Taper Tutorial For Beginner Barbers

Hair Models for Men
14 followers
10 Video Views·May 22, 2026
Join the Academy → https://www.skool.com/school-of-barbe..
AI Generated·May contain errors
Video Summary
AI GeneratedThis video provides a comprehensive tutorial on transforming a crop haircut into a mullet-style low taper. The instructor demonstrates a systematic approach to sectioning, layering the back to create a foundation, graduating the sides, and executing a precise low taper fade to blend the look.
What's up you guys so I just finished doing this mullet style low taper.
He initially had a crop or a style going forward.
I completely just changed up his look. We started slicking it towards the back.
You know I broke everything down from start to finish.
I'd really appreciate any feedback on the tutorial if you guys
watch it all the way through. If you're new to the channel hit the sub button,
comment and you know just ask me anything in the comment section I'll be
I'll be more than happy to answer any questions down below. Anyways let's get
straight into the tutorial. Peace. The first step is we're gonna map
and section our haircut really quick. I'm gonna start with my comb here
and I'm gonna bend it a little bit wherever it leaves the head.
That's where I'm just gonna go straight across like this
and I'm gonna double check again. One more time
right here so it leaves perfectly right there.
How do I make sure that it's really even here on the side
is right here from the front. I'm gonna grab the comb,
do the same thing wherever it touches. That's where I know
where to go from this to the ear again. It touches about right here so I know
to go all the way across right here. I'm gonna repeat the same thing
on this side. Grab my comb and push it wherever it touches.
It touches right here. I'm gonna go straight down from this line.
Put my thumb there and push this hair all the way back
and this hair all the way forward. This hair is really heavy right here in
the back. Next thing is I'm gonna separate this
panel from the top panel. So we have our point A right here. I'm
gonna attack his recession point which is right here.
It's point B. So here with my index finger I'm gonna push this all the way
through. Once it gets there now we have
separated the top panel with the side panel.
It's really really heavy here in the back so we're gonna layer the back.
How we're gonna do this is taking a vertical section here.
So how I want to really trim this in reality
is I want the hair to kind of almost fall right here
so that I know that's just more of a visual guys. This is
not so systematic but if I cut the hair right here
essentially it would lay right here. So I'm probably gonna take off about
an inch and a half so even two inches right here.
And this is gonna be the foundation of the whole haircut.
So let's begin. I want to trim maybe a little more.
It's perfect. The bottom I like how the bottom is already. I'm not really gonna
touch the bottom. So now that we've cut this right here
just so you guys are not confused I'm gonna comb all this down
so you guys understand. I know that I just literally cut this right here.
So this is all cut all this is not cut. How are we going to
basically over direct something that's been cut to something that hasn't been
cut? All that we do is literally comb
hair to the side. So about I like to say let's push 80% of
that guideline to the side and we're still going to keep 20% of
that that we cut and now let's just drag. Now we've grabbed
basically pieces of hair that haven't been cut
and now we have a little bit of what's been cut. So when we pull it out
this is going to be shorter this is going to be longer and we can literally
just know the difference between what hasn't been cut and what
has been cut and we can make both sides even
and repeat the same thing on every single guideline.
So let's begin. So I can see the guideline here
and this is hair that hasn't been cut. You guys can see this side is completely
layered this side is still really heavy. So now we're going to transfer a guide
down the middle to over direct to every single guideline
on the left side. I'm going to comb this all the way down
vertical section. We're just going to restart
to start the layering on the left side. It's literally the same thing.
So as long as we created our section you guys can see
we still have the guideline that we already cut.
Repeat the same process comb this down then push it to one side.
Alright so we finished layering the back now we're going to start the graduation.
We're basically building weight towards the back. It's going to get shorter here
at the taper area and it's gradually going to get longer.
So first step is from right here from the corner
I'm going to go straight across. It's going to be our first
guideline. Scoop up the hair here. So this has to be almost like this with the
comb. So reorganize again.
It's the line right there. I'm going to scoop up my comb.
The second one is right here on top of the ear. Scoop the hair.
This is almost like a floor guard. We're just using the scissors instead.
Now this one is going to go all the way across.
Right there. Around the ear like point cutting.
We're done with the back. We're done with the sides. Now
we're going to attack the front and comb everything forward.
The hair easily flaps like this to the side.
To establish the length here in the front we know we're going to comb the
hair backwards like this. I want his hair to really sit almost
right here above the eyebrow. So his hair curls up a little bit but
it's still kind of long. So what I'm going to start with is right
here. Right above the eyebrow. I know that
it's going to scrunch up a little bit. So it's going to land a little bit on
top of the eyebrow. So we'll go and cut an inch and we can
expect it to puff up an extra inch. So in reality
it's going to basically be almost like two inches that we've cut.
It's going to land exactly about an inch above the eyebrow.
Just by cutting this much. I'm going to point cut.
I'm going to match everything to that. Almost kind of like
a round shape. We're not going so squared. I want it to be a little shorter there
and then we're going to start slowly making it longer towards the edges.
You can see the connection points right there. Once we're done
cutting the bangs we already know this is going to be shorter.
So what I'm going to do. I'm going to take one profile section down the center.
So this part is part of his bangs. So I'm going to comb that forward.
Everything here on the side I'm going to connect to what we graduated. So
this overhanging flap that we see it can all be connected to what we graduated
on the side. You guys can see the hair that's right
there that's been cut. Once we find that I'm going to elevate a
little bit and then I'm going to start point cutting.
Now starting from the very front. We already know we cut
a little bit. I'm literally going to round it off
in there and then we're going more from a triangular shape. We want to make
the front be longer in the back like this. Now that we've cut a piece
from the center it becomes a little easier now we can
just literally take horizontal sections and see what we've
cut and see what we haven't cut here. All right guys so the first step that
we're going to take in the side taper is opening up the lever in our three guard.
This makes the three and a half. We already did graduation here on the
side so it's going to be pretty easy to blend
into that length that we just cut with the scissors.
Next thing is I'm going to grab my trimmer and set
a one inch guideline or one finger and we're going to remove it. To erase
that line we're going to go from the open position
to closed. So we did use the half guard so the half guard is a little bit
bigger than the lever open so that's why we're just gently flicking up to the top
not really applying that much pressure. Then I'm going to go three quarters
I'm going to go a little bit lower now in the middle
I put the guide I put the lever in the middle we're hitting
this in the middle and I'm going to close it and hit the beginning of the line.
Once it's closed we can start opening it little by little.
Now with the 1.5 guard I'm going to go a finger above again to
finger or an inch it's the same thing as long as you guys get the concept.
Then I'm going to open it a little bit and flick up a little bit.
Now this line that you see there we're not going to erase it fully with the one
guard lever open I'm going with the one guard lever open here
and gently flicking up then I'm going to put it in the middle
go a tiny bit lower I'm going to close it and hit the beginning of the line.
This can look deceiving because it looks kind of already almost blended
but we're still going to use a half guard
lever open. Start slowly closing it little by little
here I'm going to line it up let's line up the secret area let's
start here at the top then go towards the bottom
the reason being because you don't want to push it so much from here
that you end up just going deeper by creating a reference point here at the
top and here at the bottom you ensure that
you're not really going to push that c-cup.
I can already see exactly where I need to go.
I'm going to detail.
