Whether you’re a beginner barber or an experienced barber looking to refine your technique, this tutorial breaks down the entire haircut step by step so you can apply these techniques behind the chair.
If you found value in this video, make sure to subscribe for more barber tutorials, haircut breakdowns, business tips, and behind-the-chair content.
📍 Filmed at Change Barbershop Sienna in Houston, Texas
About Change Barber Studio (Houston, TX):We’re on a mission to build the biggest barbershop brand in Houston by creating next-level experiences for clients and opportunities for barbers. If you’re looking for a shop that pushes growth and culture — you found it. 📍 Visit us in Houston, TX📲 Book your appointment here: https://changebarbershophouston.com/💈 Barbers — Want to join our team? DM us on Instagram: / changebarberstudio
What's up guys today we are going to be doing a mid taper with a textured fringe. I'm going to
start off with cutting the top so we're going to fully saturate the hair. I'm just going to keep
spraying and spraying and when you think you've sprayed enough spray a little bit more. Basically
this is just going to make sure that you have clean sections and whenever you're doing your
scissor work you maintain proper tension. So to start you're just going to comb the hair following
its natural growth pattern. So there's the crown and whenever you make your first section you're
going to start right at that crown and you're going to push it towards the recession in the front.
Sectioning with feel and then sectioning with sight afterwards. So I didn't quite like that
section right there so here I'm redoing it again and just making sure I really like where my
section is sitting because this is basically separating the top of the hair and the sides of
the hair. Making sure we get these first sections right is going to make blending the sides let's
say like the fade into the style on top way way easier. So just going to do the same exact thing
on the left side of the hair starting at the crown and we're going to be pulling towards the
recession in the front just making sure our section is as clean as possible and since we
are working with natural sections following the shape of the head in front of the ear our
section could change slightly just depending on the style of the haircut itself. So here once we
have our sections done we're going to clip the hair up. His hair is a little on the shorter side
but I usually like to twist the hair and then clip it up with one clip just so it's out of the eyes.
So now that we got our sections done separating the top of the hair and the sides of the hair
we can go ahead and start our scissor work on the sides. So again full saturation of the hair.
So when I'm doing my scissor work on the sides I'm going to be creating two points of reference
for myself. One on the bottom of the hair is where the fade is going to meet the scissor work
and then at the top of the hair where let's say this is we could call it the transition zone is
going to start kind of fading into the top of the hair if that makes sense. So here I have my hands
on the head this is going to be the top of the fade where the fade starts to blend into the
scissor work. So we have our knuckle on the head doing our scissor work because once we put our
guard on this should fade right into that scissor work. So now we're going to cut our top guide
we're going to pull down to where we want it and then pull out from the head. So I cut his hair
not too long ago so I'm going to have sort of this short bit short bit long bit in the middle
I'm just going to cut that piece right there and I'm just going to follow that
all the way around his head. So one thing when you're doing scissor work is you want to keep
your tension the same because if not then the cut's not going to be the exact same all the way
around the head because it could be loose in this area or it could be too hard in this area
which is going to just create inconsistencies in the haircut basically. So here as I get towards
kind of I guess the temple area I'm bringing my hands just a little bit closer to the head
because that's where it's going to fade into. So boom right there my knuckles on the head that's
where the fade is going to fade into the scissor work. So then again on the same side just creating
my top of the guide here. So whenever I'm pulling these sections away from the head it really kind
of depends on what shape I'm trying to create. So since I'm creating I have my bottom points and my
top points depending on where I put my top point and my bottom point is the shape that I'm creating
if that makes sense. So again as I get towards the temple area I'm bringing my shape into the head
because that's where my fade is going to be connecting into that scissor work. So once I
have both my bottom points and my top points now I can take diagonal sections connecting those two
points. So here let's go ahead and take my first section so my guide is going to be right there at
the top. I don't know if you can see it so boom right there and my comb is making the line towards
that bottom towards my bottom guide. So I gotta say what's up to Eric real quick and continue with
the haircut. So again taking a diagonal section I'm going to have a top guide and the bottom guide
and my comb is going to connect those two points. So I'm going to use my comb to connect those two
points and create that line. So boom you'll see at the top right there will be my top guide going
down to my bottom guide right there right into the head. So boom now we're just going to follow this
all the way until we're on the left side and then we're going to do the same thing to the right side
of the hair. Man I think the last time I recorded a YouTube tutorial like this was back when I first
started cutting hair maybe like five years ago four or five years ago or so. So I'm just trying
to get back into it so boom got my top guide bottom guide connect those two points as easy as that.
But yeah I want to try posting maybe at least once a week at least one of these haircut tutorials.
So if you're watching this and you have a haircut you want to learn drop it down in the comments
let me know what kind of haircuts you guys want to see and I'll make sure to record that and get
that tutorial out for you guys. So his hair is a little on the thicker side so it is a little bit
harder just to make these sections so if you needed to you could clip his hair up each one
of these sections just to keep the hair out of the way. I didn't really feel like I needed to
with his hair today but sometimes I do if that hair starts coming into that section
just to kind of keep it a little cleaner and to focus on the hair that I'm cutting.
So boom just finished with the left side of the hair now we're going to go on to the right side
and again making sure to fully saturate the hair to ensure clean sections and proper tension.
So here taking diagonal sections got my guide at the top and since I already pretty much cut this
I'm not going to be cutting too much because I already cut it whenever I was doing the left side
so as I'm cutting this is kind of just like cross-checking in a way and then as I get a
more towards the right side of the head there's going to be a little bit more hair to cut.
Another thing to note whenever you're taking these sections make sure they're about a comb's width
doing that will make sure that you don't accidentally over direct one piece of hair
towards another section and unintentionally making that piece longer than it needed to be.
And here we're going to take our last section don't need to cut anything great.
So now we're going to start working on the top again saturating the hair
just combing everything towards the back making sure all the hair is fully saturated.
Okay so now we can start working on the top I'm going to take a section right down the middle
just making sure that's a natural section right there and once we got that nice and clean then
we could start working on the sides of the top which if you know DFS this is zones 3 and 4.
So when you are cutting zones 3 and 4 you're going to be working on your horizontal shape
and your vertical shape at the same time. The vertical shape is going to be determined by your
elevation this is how low or high that you pull your section out to. So the lower you pull it
the heavier it's going to be the higher the more round your shape is going to be and in between
more square. For this haircut we're going to keep our elevation right below square.
So as I'm pulling my sections out for these zones 3 and 4 I'm pulling to my line right underneath
so right there that's the top of the guide or that's the top guide I made when I was doing
my scissor work on the sides. So me pulling to this line is basically connecting the top to the
sides seamlessly and as I get in front of the ear then I can change my angle or my shape to
work with the style that I'm creating. So here I'm bringing it just a little lower lower elevation
to keep the bangs a little bit longer and a little heavier in the front
and then I'm just going to do the same thing on the right side pull to my guide underneath
and then in front of the ear change my angle depending on the shape I want to create
and boom and once I'm done cutting I'm just going to make sure the bangs are the same length here
and then I can start working in the middle which is zone 5. So here as I'm working in zone 5 on
the back I'm working in front of the crown I already cut the back of the crown whenever I was
elevating zones 3 and 4 so I don't have to worry about that right now. So now I'm going to take
horizontal sections combs width and as I pull up I'm going to be seeing short bit short bit long
bit in the middle and I'm just going to cut off that middle part and I'm just going to work this
all the way towards the front. So here I'm point cutting just for a little bit of extra texture and
movement in the hair since he does have pretty straight and thick hair. Take my horizontal
section see a short short and then cut that long piece off in the middle. So now once we're done
cutting zone 5 right in the middle we're going to go right here on the corners and then here
these corners will be cut depending on the shape we want to create so I'm just slightly rounding
them off right in between square and round. So in DFS these are known as the silent zones
6 and 7. So once I'm finished with all of that then I like to ask my client if he likes the
length of his bangs if yes cool if not then here's whenever I start to trim them.
So I'm point cutting the bangs and slightly following the shape of the head I don't want it
to be too square in the front which is going to leave like that bowl cut so slightly following
the shape of the head into kind of like that shape I created whenever I was cutting zones 3 and 4.
So you'll see it right here as I'm cutting and then right here on this corner it's gonna
it's gonna connect into it's gonna connect into that shape I already cut in.
So boom right there and when I'm finished with the bangs I just like to take vertical sections here
just to make sure the bangs aren't sitting too heavy. So if I see a corner that'll just feather
that out right there. So boom that's pretty much all the scissor work on top now we're going to
style it I'm just getting rid of all the hair right now with a blow dryer so I'm gonna start
with a sea salt spray 245 sea salt spray put a couple squirts of that in and then we're gonna
follow that with clay 245 as well take about like a fingertip pea-sized amount or whatever
just rub that in your hands might get a little warm and then start putting that pretty much
everywhere in the hair. So you really want to get in there and not just put the hair or not
just put the product on the top of the hair but actually get into the roots of the hair and that's
where kind of all the texture and the hold and all the nice like texture movement is going to come
from. Now we're going to start on our blow drying and styling process so I like to start in the back
kind of around the crown area and just start scrunching. My blow dryer is on medium heat
and high speed right now so just scrunch scrunch and scrunch until it's dry and I'm also working
with the hair's natural like growth pattern and just scrunching to bring out a lot of texture
and then here I'm using the vented brush just to kind of comb the hair forward into its natural
direction and then after that I'll just keep scrunching to add more texture. Same thing on
this other side comb and scrunch. So I recommend styling your client's hair. Not everyone knows
how to style hair and this is what's going to really separate you as a barber is actually
styling your client's hair and even educating your clients on how to style the hair so that
they can do it at home themselves and this could actually bring in more product sales bring you in
more revenue and stick out from other barbers because most barbers don't really style their
clients hair. So here in the front I'm blow drying up to kind of give like that fluffy volume so this
is how you get kind of like that fluffiness in the front styling it up and then back down so you get
kind of like that wave like that waviness poofiness almost type of thing and just kind of
just keep scrunching and moving the hair. So that's pretty much the whole styling process now we're
gonna go on to the fading process. I'm gonna start with my four so this right here is my four open
remember whenever we were cutting our first cuts in the back with the scissors
this four is going to connect right into that scissor work that we had our knuckles on the head
so boom right into that scissor work with the foreguard using our comb to feed it in
and once we have it open we'll close it right underneath that section we just did
and then I'm just blow drying to make sure the hair is dry as I'm cutting. So now
just using the three finger method making sure that I have enough room to put my
my bald line in so here I got my Tomb 45s putting my bald line in for a mid taper
and one thing I would say whenever you're putting your bald line in is make sure you
put it high enough to where you will actually have contrast in the fade like usually on
everyone's neckline there will be like this M and just make sure it's above that
and then also use a mirror to make sure your line is straight and then we'll move on to our
no guard open about a finger's length width or so just making sure our section is nice and clean
so right after that I like to get my one and a half guard and this is going to be open as well
and I'm going to go right above my no guard open same width and creating my second guideline
for the fade and once I put that guideline in I'm going to close it and I'm going to go
halfway up that section again so that's going to kind of act as like my one open almost
and once I have that in I'm going to put my three guard on open and same thing right above that
so this is going to connect right into that four so open flicking up at the top not going into the
head but just coming off the shape of the head and then again we're going to close it
and just fading out any kind of lines we see in the fade and here going back to my one and a half
we'll go open and we'll attack the line in between that one and a half and the three
so here I'm going to play with my lever I just went halfway
make sure you dust your client off you blow dry them off all the time and keep a clean canvas
so now I'm going in with my half guard I like to do my half guard halfway and I'm gonna attack that
line right above the no guard open so I'm gonna tap that line and after I tap that line I'm gonna
go open with my half guard so boom right there going open and spreading out that lightness
and then once I do that then I could start detailing a little bit getting rid of any
dark spots opening closing my lever using the corners of my blade to take out any dark spots
and detail the fade so detailing I learned is basically like trial and error just start with
a higher start with a higher guard and just go lower and lower until the line comes out and you
just do that in every single spot of the fade so right there open closing little by little until
the dark spots come out and now we're gonna take our shaver I like to go right up to the line not
quite right up to it I like to keep maybe like half of guidelines and then right above that
I like to start flicking so shaver on the head right there but once I get towards that line I'll
start flicking up towards it now to take our bottom line out we're gonna go with our no guard
closed we're gonna tap that line once again just tap the line tap the line and once we tap the line
we're gonna go halfway with our lever so here we got it all so boom go halfway with our lever we're
gonna go right above that so now in theory if we close it one notch everything under that halfway
should come out and if not then we just start detailing so after I do all of that I like to
open my guard back all the way up and just start detailing the fade again so just play with the
lever every every little section you go start with a higher higher guard or with your clipper open
and just go little by little close it little by little until any dark spots come out and that's
pretty much how you detail just spread out that lightness and get some good contrast on the fade
a lot of corner work as well so here let's do this side again the right side three fingers length
I'm gonna punch my bald line in
right around the ear line and then like towards the c-cup I'll raise that bald line up just a
little bit so shaver and then we'll go with our no guard open about a fingers width fingers length
or so right above that we can go with our one and a half open halfway up that section we're
gonna close it and then once we got that in go with our three open I'm going to fade that right
into our scissor work and then we'll close it and then we'll start our process of fading down
boom just getting rid of any lines we see put our one and a half on start open and now
oh right here I saw a little line in the back so just hitting that no guard just detailing a
little bit more I think I'll probably take my shaver as well and start hitting it down on that
to kind of feather that line out so now let's go back to our half guard halfway we're going to tap
the line and then right after that we're going to go open boom and just start detailing that
make it nice and clean right after that we can go to our shaver all right so we use our shaver
right up to the line and once we get towards it we're going to start kind of flicking it out
trying not to create a hard line and then no guard close we're going to tap the line
take out this bottom line and once we punch that up a little bit we're going to go halfway
and then in theory if we close it one more notch it should take that line out
and if not we're just going to detail from there and once we're done with that
we're going to open our guard or open our lever and then start detailing once again
and that's pretty much how I do my fading system so for barbers trying to learn how to fade
I would recommend sticking with a system or finding a system that you do like and then just
kind of mastering that learning from other people and picking things from this person and this
person and just kind of putting it together to create your own system so here we're going to
start on the left side and see if you keep up so as I said earlier this is my first youtube video
in like four or five years or so if it's your first time here it probably is because I haven't
posted but whatever my name is Aaron Medrano I live here in Houston Texas and I own two barber
shops Change Barber Studio we have one location in Pearland one location in Siena where I cut out
of right now and right here one of the barbers made these cool door hangers that he's gonna go
to apartments and hang which is pretty cool but anyways so I've been cutting hair for about five
or six years now or so I started senior year of high school I just had to figure out what to do
after high school I knew I didn't want to go to college and I would always watch
youtube videos just like this about cutting hair and that's kind of how I got started
I was always interested in hair but I just never pursued it the plan was always to maybe go to
college or go into the medical field my mom's a physical therapist so that was one of the options
really had no idea but barbering was always in the back of my mind so I gave it a try and pretty
much ever since then I just fell in love with with cutting hair and the industry and the business
behind it and about seven months ago or so just opened my second barber shop so pretty cool now
I really just want to help like other barbers or people who are thinking of getting into barbering
and show them that you could actually make a career out of this and like no matter if you're
young you're just coming out of high school or you're older and you're looking for a new career
change like barbering is is one of those careers where in like a year you could change the whole
trajectory of your life for the better but yeah so back to the haircut so here right around the
ear I like to go with either like a four or a three right on the edge up or right on the line
up whatever you want to call it just to kind of take it down a little bit to get a clean line
on there same thing on this side just take it down slightly in here I always feel like
when I do my tapers the left side is always different from the right side so
I'm just coming back here and just detailing a little bit more just trying to match the tapers
and then once I'm done with that then we'll get start doing the edge up so for me whenever I do
the line up I always I have a system so I always do the right side around the ear left side around
the ear and then I do the right c-cup and then the left c-cup literally every single time here
whenever you're doing the edge up just make sure you have a finger on the head for stability
and you're holding down the ear with your other finger and just make sure you don't
nick the ear or something just clean it up and boom we'll do the left side
and whenever I do lineups I don't like to push super hard on the client or on the skin
I just don't feel like it's comfortable for the client and you can still get a clean line
without doing that also another thing whenever you are pulling down the ear just be aware that
you are pulling the skin as well so whenever you do like go the ear that lineup could be higher
than you wanted so just be aware of that whenever you are cutting it later just cleaning it around
the ear making it look nice and sharp so here we do the right c-cup just picking up the hair to
see where the natural line lays and then I like to use the left corner of the blade and just start
sculpting that c-cup out and just comb it back down just go over it again same thing just using
that left corner to sculpt it out till it's where we like it and then here I like to use the comb
to kind of just make sure the c-cups are going to be on like the same level from the front view
and then here instead of the left corner I like to use the right corner so not putting the full
blade on the skin except right there but as I'm doing that curve just using that right corner
and slightly tilting it to get that nice curve right there and then I like to blow dry the client
off I think that's pretty much the whole haircut yeah so just restyling the hair scrunching bringing
out the texture back so when you style hair you could hit it with a cold shot at the end and the
cold shot is basically just going to lock that product in so whenever you do put it in you put
the product hair or hold on you put the product in when the hair is damp and you're warming up
the product and you're kind of just blow drying it and molding the hair into like kind of like
the texture you want and the shape that you want and then that cold shot is just really going to
lock that in and here just make sure you always clean up the neck hairs you don't want your client
leaving with neck hairs and follow up with the shaver I like to use a shaver on the neckline
as well but yeah that's pretty much the whole haircut mid taper that messy textured fringe
thank you guys for watching here's that aftershave if you like the video like it
subscribe to the channel comment down whatever videos you want to see could be haircut tutorials
videos about business what kind of haircut videos you want to see so whatever thank you guys for
i'm out