How To Connect Top & Sides When Fading

Hair Models for Men
14 followers
19 Video Views·Nov 14, 2026
Find more on Skool - https://www.skool.com/studio26-barber...
AI Generated·May contain errors
The haircut today. First of all, I wet the hair down.
I've combed it all down into its lying state.
So nothing's sticking up.
So I know where the weight wants to sit and the direction of his crown.
And if there's any problems there.
So first of all, we're going to put a weight lining around the sides
using that weight controlled guide.
So how that goes is from the crown.
I'm going to section almost a horseshoe, but
Starting from the crown.
So I'm not starting from the two frontal areas.
I'm going to pull all this hair down.
I'm going to have it lying in the way it wants to lie.
And from there all we're going to do is just
match it simply down this right hand side there.
So all the hair is lying. I've pulled a bit of the
top down so we're going to first create a guide
for our fade to run into. De-bulk this then cut
the overhang on top. So really simply we're going
to start right in the back of the head to this.
We're going to set our weight control guide
almost where you can see the ridge already.
So over there, I'm going to start on the over,
my fingers are flat to the head.
I'm pulling the weight and length into my fingers.
Nice tight tension, cut across.
So now you should see that guideline start to come in.
What we're going to do,
we're going to follow it into here and then follow it into that side.
So one side at a time, pulling down next to your guide now.
Nice and tight to the skin.
Don't be scared to cut the hair off,
that's what I tell all the students like
they're here for a haircut,
if you leave a load of weight on and they feel like they've not had
a haircut they're not really going to be happy.
So now you can see my guys start to come in,
that's our end point of our fade,
that's where we're going to be running like a two,
two and a half or three into, depends on the technique you're using.
And then from this side,
exactly the same.
You probably have seen this exact video before just in a shorter form.
back in the profiling module all we've done is clipped it out
so you have it to run back to if
you need it.
It's a technique you can use
on everyone
who's having a skin fade. So that's
our first step, that's our first cut.
Second cut we're going to pull 90 degrees off that section
from the back. I mean 90 degrees we're pulling straight out.
Find our little guide and we're
just going to take the ends off over the top
and all it's going to do is soften this area.
Obviously that's our guide underneath. Hair just coming over the top.
Cutting. Really simple this one.
Don't think you're gonna need to cut loads off
most of the time if you've done this technique on your client before.
There's not much to take
off at all.
So you see it's getting
a lot softer through
the ridge. Same this side,
working round
into that corner.
Third step of this guy
from the crown
when I centre profile.
Why do I centre profile from the crown?
It's to lie all the hair flat in the way it wants to.
Most of the time if you do that
You should have that hair lying down
in the way it wants to lie.
And if you need to,
just nailing it up.
So nothing's sticking up, the hair's lying
where it wants to.
So this is the third cut now.
Straight off that corner, tiny bit overhanging.
And some more important principles here.
So I'm pulling directly 90 degrees out
into the front of the ear,
matching it to my guide.
So I'm here, and now I'm just gonna start
to elevate my fingers.
almost down to a 45 degree
so i'm pulling to my belly that's how i like to tell everyone to do it
so you see them hairs overhanging nice
and straightforward just eliminate them and then
at the fringe we're pulling down to the waist
and the reason why we pull down to the waist
we don't want this fringe to be up here if you've got
a bit of length through the fringe you need
to angle that so it's connected in but also it maintains that length
so you can see now
That's connected through so that's how it's done and then
Exactly the same on this side
and then exactly
the same here down to the belly,
down to the waist if anything needs to come off.
So what we've done there is we've set our guide
and reduced the weight through the corners and the back.
