Restoring a Vintage Cedar Chest : DIY Tips & Tricks

Trash To Treasure
3 followers
I've refinished some pretty derelict pieces in the last few years, but what about the ones that aren't "terrible", but still need some attention. This cedar chest needed a partial refinish, and a partial finish rework. And if you have a Lane cedar chest, you're going to want to know about these locking mechanisms.
#furnitureflip #refinishing #furniturerestoration #antiquefurniture #vintagefurniture #chestmakeover #furnituremakeover #furniturerepair #chest #cedarchest #transcendfurnituregallery #mcmfurniture #restoredfurniture #restoration
AI Generated·May contain errors
Over the last three years you guys have seen me do some pretty crazy transformations.
I've literally pulled things out of dumpsters, off the side of the road, all different styles,
mid-century, art deco, everything in between. What about those pieces that come along every
now and then that maybe don't need a full refinish but definitely need some love?
This cedar chest has been in my storage room for a while now and looking at the inside it looks
pretty rough but if we close the lid here and have a look at the outside there's a lot of
scratches, there's some dings and discoloration in the finish. It's got some beautiful walnut
veneer but there's a few parts that are loose and overall it just looks pretty dingy and used.
In this video I'm going to be showing you how I tackle something like this.
A piece that definitely needs some parts refinished but not others.
I'm going to be doing some repair work to the finish on the outside,
refinishing the top, and refinishing the inside. I'm also going to talk to you a little bit about
Lane cedar chests specifically because things have changed a little bit where they're concerned so
stay tuned. My name is Angie and I refinish furniture. Sometimes I paint and sometimes
I don't but I always do what I can to save old pieces from the trash. Welcome to my workroom.
So this specific chest was made for Lane by Necktail Furniture which is a Canadian company.
You see a ton of these out there and there's a bit of an issue with them. Lane cedar chests did
a massive recall a while back because their latches were deemed unsafe. There was no mechanism to
release the latch from the inside so when the lid is closed there's no way to open it and this was
causing issues with kids getting inside and not being able to get out. So they did a recall on
the locks and for the longest time you could contact the company, tell them which lock you
had and they would send you a new mechanism. Lane actually went out of business I think it was last
year or the year before so you can no longer do that. Really your only option now is to either
remove the latch mechanism, disable it somehow, or replace it with some other latch. What I'm opting
to do here is remove this top section. I'm just going to pop this out completely and where the
hole was I'm going to patch in a new piece of cedar and the lid will still close, the latch
will still look normal from the outside, but it won't be a safety hazard anymore. You'll see on
the back here that it says 1998 for the style number. That is not the year it was made. You
always want to look at the serial number on these chests and in this case this was made October 31st
1966. Now what's interesting about this serial number is that normally on these chests it's
reversed so October 31st 1966 would actually read 661301 normally. For some reason it's in the right
order here and that's kind of interesting. There's a bit of water damage here and this hinge is a bit
rusty so I'm going to pop all the hinges and screws into a little vaporized bath. Now they don't
normally do things with the back, it's generally not sealed and you can see it's kind of a mess
here so I'm just using a really soft sanding pad here. I think this is like a medium grit and just
very lightly scuffing it to clean it up a bit. I definitely want to be careful where the lettering
and marks are. I don't want to sand over that and this is kind of funny you see these two dark
sections here just above the legs that is actually where they were spraying the color on the legs
and because the back wasn't sealed with anything it just kind of over sprayed so that's what I love
about working on pieces you kind of see all these little clues about how things were made and what
the processes were. Speaking of legs though these legs are not easily removable they won't unscrew
they're attached to this little square and the square is nailed into the bottom of the chest so
I'm going to leave that as is. Now looking at the bottom here you might be inclined to think this
was a solid wood panel but this is actually really pretty walnut veneer here on the underside
sandwiching a piece of pressed wood and I can tell it's pressed wood because I can see it in
the corner there and then on the inside of the box is a layer of cedar veneer so this chest is
a mixed bag we've got a little bit of pressed wood some solid elm and those parts are the legs and
they're pretty detailing around the front that's all elm walnut veneer all around the outside and
the bottom cedar veneer on the bottom on the inside and then cedar panels they're slightly
thicker than veneer on the rest of the inside because this part of the cabinet isn't getting
a full refinish just to refresh I'm using some crud cutter to clean it very thoroughly and as
far as the inside goes I don't know what the heck someone put in here it looks like someone tried to
coat it or seal it with something but it's nothing that I've ever seen before cedar chests are
typically not sealed inside because it would render cedar kind of useless and you know the
whole point of having a cedar chest is it's inherent resistance to insects and of course
the beautiful scent but whatever this is it's gotta go okay so you're probably wondering if
I'm not refinishing the outside what am I going to do with all these marks I'm using a little bit
of stain now there's different ways you can do this this is how I'm choosing to do it I'm just
dabbing a little bit of American walnut stain which in this case is water-based you could use oil
and I'm just dabbing it on all of these marks where the finish has been disturbed this isn't
going to be perfect but there's another step coming later that is going to sort of unify all
this and make it look like this damage never happened and I'm using that same stain on the leg
now the reason I'm opting to use water-based is time is a little bit of the essence here
and water-based stain is usually ready to seal pretty quickly as opposed to a couple of days
with an oil-based stain temp oil is pretty much my favorite thing to use inside a cedar chest it's
not going to seal the cedar like other finishes will but it is really going to nourish the wood
give it this really deep rich color which doesn't last forever it does eventually kind of fade down
over time but it's just a great way to freshen it up without sealing away those amazing properties
of cedar some people prefer to use cedar oil and that's totally fine too so I'm just going to use
some masking tape and tape off the latch because I don't want to get any gunk on it so basically
what I'm going to be doing here is adding a light coat of this mohawk easy vinyl sealer this is
going to kind of seal in the stain that I just put on but also the old finish and give me a uniform
surface to work with for my next step which is adding a little bit of toner now what the toner
is is basically a tinted locker in this case I'm using the color perfect brown this is probably my
favorite color and it's the most universal with mid-century pieces although it won't work for
every piece this is what it looks like after two very light misting coats of the color and you can
see it's now more uniform all those little marks have kind of just disappeared you can't see
anywhere that I put stain so now I'm sealing with some mohawk pre-catalyzed locker now you see this
fog and you're going to see it kind of come flying this way in a minute that is some toxic
air soup so if you're ever using lacquer make sure you're working in a really well ventilated area
that you've got a respirator on and to be honest really I should have long sleeves on while I'm
doing this it is something that I'm probably going to change here in the near future because
this stuff is pretty toxic now that the base of the cabinet is all good to go I'm going to go ahead
and refinish the top so I'm using my favorite stripper which is circa 19 sorry circa 1850
and what's interesting is that a lot of these cedar chests kind of pre-mid-century were shellac
coated and even the occasional mid-century one this is actually a lacquer finish
to get the gunk off the edges here which is actually a piece of solid
elm trim just using this little scraper and you can see here if I can hold it properly
with two fingers that's how little pressure is needed to kind of scrape this off
scrapers sometimes get a lot of flack from people that don't like them and don't use them which is
totally fine like use what you want to use but there's kind of a misconception that they are
dangerous and can really mess up the wood and no people can mess up the wood but scrapers not so
much it's all about technique and practice and I've been using scrapers for years now and I
can count on one hand the amount of times I've nicked or dinged something and most of those
cases were because the wood was uneven so a scraper can be a really effective tool if you
take the time to learn how to use it properly so I need to cut a piece of cedar to patch in here and
to do that I'm just squaring up this hole because it wasn't quite straight and using that little
block of cedar you see I'm just going to cut a patch now it's not going to be perfect the grain
isn't going to line up exactly and the color will probably be different because it's different
boards but it's better than leaving a gaping hole or leaving the latch which is dangerous and
shouldn't happen I'm using that same cement water-based stain around the edges here which
again is elm I won't be putting any stain on the top I have a different procedure for that
but I need these edges darkened up once the stain has dried I went in with the vinyl sealer
and coated them as well as the top now I actually did two coats of the vinyl sealer on the top
which is going to seal in the wood which you can see has darkened up quite a bit but it's
still lighter than the edges so just like the bottom I'm going to go in and I'm going to add
a couple I think I did two very light misty coats of toner which is what you see me doing here
and if I just slide in the original finish next to the top you can see that they're really close
I'm happy with that to me this is good to go so now I'm going to go ahead and do some lacquer six
coats of lacquer to be exact and I'm happy with how these hinges turned out as you can see there's
no more rust so I'm going to pull these out dry them off and reattach them to the chest when I
stopped into my storage room to find a project for this video I had to literally dig this chest out
we got a ton of snow last weekend and yeah it was up to the latch so I only had this tiny
little shovel that goes in my car to dig myself out but I managed anyway having a look back at
what I started with this is a perfect example of a blend between touch-ups and refinishing
I could have absolutely stripped the outside of the base of this chest but honestly it would
have been a waste of time because with a few repairs and some touch-up work this looks pretty
much as good as new I just realized I don't have a clip of it but I did add some glue to this
section here that was loose and it is now tight again well as always thank you so much for
following along as I work on a piece of furniture
I will see you next time and enjoy the reveal
