How to Remove & Install Smoke Alarms/Part 13 ADDED VALUE

VideoJoeShows
86 followers
7 Video Views·May 18, 2026
How to remove & install smoke alarms Part 13 added value is what this DIY howto video is about. VideoJoe is working on a Condo renovation & one of the things he has been doing is removing the old smoke alarms so he can install some new smoke alarms & he wants to show you a few things when it comes time for YOU to install some smoke alarms. Watch & learn as VideoJoeShows you what VideoJoeKnows...how to remove & install smoke alarms Part 13 added value. Nice!
AI Generated·May contain errors
loady loady loady looks like I'm ready to replace a smoke alarm. I've taken the
existing smoke alarm down here's the here's the first section of it and I'm
gonna replace it I'm inside an attic and when you're in an attic if you got any
gas now there used to be a water heater here that was hooked up to gas we ended
up putting a what do you call it a tankless water heater and it runs off of
gas you can see where the gas line is and there's also a gas heater furnace
here whenever you have gas you've got to have a smoke alarm and when you have a
smoke alarm installed it has to be one of the combination ones that smoke
alarm slash combination called a carbon monoxide and smoke see see here I'm
instead this one I'm installing it's hardwired and it's got a 10-year battery
backup worry-free smoke plus carbon monoxide alarm you've got to use one of
those anytime you are close to gas okay and that's what I'm doing and I know
it's time to pretty much replace this I've looked at the old one and the old
one's got maybe a couple more years life expectancy on it and generally you can
see the dates on the backside and here I think that's the date that might be
the date right there okay and so that tells me this this actual smoke alarm is
probably six or seven years old and the reason why I'm replacing it just because
it wasn't actually bad yet but we have some other ones that went bad the the
10-year lithium ones believe it or not two of them in this condo after we
moved in they went bad and found out that the smoke alarms were only about
seven years old and they should have had a life expectancy of 10 years that tells
me we had problems with two of them chances are we might have problems with
some other ones I talked to mommy and she agreed and it was really at her
urging for us to get these replaced okay so here's the here's the new one you
just take this little bag off it's like a shower cap I usually save those okay
and and on here will be date of install and let's see here replaced by so I'm
gonna fill those out before I get up there it's always it's always good to do
that just in case you think I'll remember ten years from now no biggie
maybe you want to replace it nine years from now or maybe seven years from now
you forgot okay how many years was it what year was it when I installed it so
you don't want anything like that put a date on there if it doesn't if it
doesn't have anything on the sides you could write it on the back or something
but it's always nice to be on the sides because then you can just look up there
and see you know without disconnecting it but they're pretty easy to disconnect
and pull up on click on the harness kind of like this one here okay so I'm
gonna do that and then we'll get with pulling the rest of that old one down
and installing the new okay time to get busy and I think I'm only gonna need a
screwdriver Phillips screwdriver to do this whole little kitten caboodle
project and like I said this is the old one that was up here now first off make
sure the power is off I've already already checked make sure the power is
off before you work on any hot wires or anything okay and I was gonna say this
one because it's like seven years old I'm gonna keep it just as a backup you
never know if another one goes out or something I always got a backup and I
always like to take the covers off just in case after over the years maybe the
cover has been changed ever so slightly and see I only only loosened up those
bracket attachment screws oh wait I don't want to do that yet getting ahead
of myself I'm gonna take off the the old mounting harness okay and generally
there'll be three wires are red black and white and I still like to just be
kind of careful as I'm doing this I know that the power is off but I still like
to be kind of careful as careful as I can I notice I've got two black wires
two white wires yellow wire nuts orange wire nut on the red wire coming from the
harness coming up to a black and white wire that's for the smoke alarm and the
red so I know so I'm going to take the orange one off and make sure I use the
orange wire nut to hook up the red again okay and I can take this whole thing
down now the power is off I shouldn't have to be too concerned if you are
concerned you could do one wire nut at a time if you want okay I always like to
try to encourage you to take that little harness off even if you think the new
harness is the very same take it off you never know if there's something bad with
the harness now when they come there's a little red plastic cap on the red in
case there's only black and white if this was at the end of a line maybe you
don't have a black red and white wire to hook up to maybe the reds not here maybe
this black and white was not here you only have black and white to hook up
then you'd leave that little cap on there or if you can't find the cap or
if yours doesn't come with a little cap put a little wire nut on that little
one okay so now I'm gonna do the red the red first and remember that's gonna be
the orange wire nut okay you see anything hard so far I've done I've
shown you I don't think so okay get that on pull on there make sure it's snug as a
bug in a rug okay now let's get rid of the whites and I gotta make sure the
white stayed together could just kind of bend that end over a little bit hold
your mouth just right get them all in a bunch there put that wire nut on there
hold everything so that it all goes in together and pull on there make sure
it's snug and it is sometimes you'd be surprised you don't pull on that on this
little wire and the wire nuts tight you think ah everything's fine I don't have
to do that and then you find out later you got a problem and you troubleshoot
it you pull you pull the whole thing apart and find out your wire nut was
tight and you pull it on the wire and the wire was loose and chattering or it
was out or whatever I've had that happen before okay even though it's in
the attic I'm still gonna try to make sure I get my wire nuts pushed up in
there far enough try to keep my grubby fingers off of the ceiling I know those
try I try to keep my wire nuts away from the very very middle and make sure I got
enough room so that I can kind of push this up in it in there knowing that'll
go all right let's just keep it rolling I left my mounting screws get it on
there slide it into place and there's there's enough for three different size
mounting light fixture boxes or whatever and so you don't have to guess what size
your box is whether or not your cover is gonna fit okay your cover should fit
on any three sizes this one happens to fit right there it's snug I want to make
sure it's nice and snug so when I slide this on when I get ready to slide it
back off this never moves on me okay I want to make sure this is clipped in
properly on here and it snaps in and it's snapped okay now I can push it up
in there line this up make sure in some some locations it might not fit and then
you slide it around and then it fits make sure to feel your hand your finger
all the way around make sure it's up snug before you turn it I'm gonna turn
it right to the right and the battery should chirp okay now it should click on
there more now am I done with it no I'm not gonna be a hundred percent done with
it until you turn the power back on once you turn your breaker back on then you
can press the button see this is the test button or reset button or setting
button whatever this particular smoke alarm only has one button right here in
the middle I don't want to press it right now because it's not gonna set
properly because I don't have a power on to the house for the circuit where all
the smoke alarms are installed does that make sense so I've got to do that first
then I'll come back up here press the buttons that will be rock and roll ready
to go okay maybe we'll do that next okay I turn the breaker back on because this
is a smoke alarm and a carbon monoxide alarm it'll it'll voice activate and
we'll say smoke or fire two different sequences and stuff okay so I'm gonna
press it and let go see what it does here warning carbon monoxide it has to
go through the whole system like that so that you know that it's set properly and
now the green light I see the green lights on and everything and this is all
set and ready to go okay and now that I've turned the power back on I've got
to go around to all my other smoke alarms yes don't forget to go around to
all your other smoke alarms and and reset them okay not all are the same
this one just happens to have one button if yours has two buttons look at it read
your directions or look up there shine a flashlight see which ones a reset button
or a test button and do it accordingly and get all of yours reset before you
call it good don't forget because if you don't set your other smoke alarms they
always tell you to retest them anytime you turn your power off because these
were hardwired to your system on a breaker if you don't turn if you don't
press your other ones and set them and test them throughout your condo
throughout your house maybe they don't get reset properly and if you have a
fire maybe the smoke alarm does not go off properly okay don't forget well
that's all I got for this time but I'll be back with more videos and I have no
idea what I'm gonna show next you just have to keep sticking around to find out
