How to replace a smoke alarm detector

VideoJoeKnows
61 followers
4 Video Views·May 20, 2026
http://www.VideoJoeKnows.com How to replace a smoke alarm detector can be installed by you......yes you. There's a few how to steps to complete, when replacing a smoke alarm detector, but step by step, you can do it! Have you ever had a need to replace a smoke detector alarm but weren't sure how to do it, so you ended up paying an electrician to do it for you? How much did it set you back $$$? "Joe" doesn't want you to spend your money that way, since he'll show you how to replace the smoke alarm detector thingy ma-jig yourself lol! You know what?.....if "joe" can do it, you can do it!
http://www.VideoJoeKnows.com
AI Generated·May contain errors
After a little deliberation, I went ahead and worked on this smoke alarm one time.
Plugged it all back in, looked at it, couldn't figure out what was going on
with it. I put a battery back in it. I waited for about 15 minutes, reset the
battery and everything, and reset the smoke alarm. Nothing happened. So I
thought it was all preset. Then the next day, the same thing happened. So I have a
feeling that there's something wrong with this smoke alarm, and it's time to
replace it. Smoke alarm. Okay? I'm going to unscrew that. I got that off the wall.
Okay. Next step is I'm going to pull this connection off right there, and I'm going
to see what I do next. So with this here, I'm just going to unscrew this backing
plate. Okay? And I may not have to remove this connection, because the new smoke
alarm that I got, I think it comes with little connections to attach onto here.
Okay? Loosen that up like that, and I just slide that into place like that over the
screw heads, and out we go. Let's take a look here. See what we got. Here's the
alarm, and there should be a backing piece in here somewhere. Okay. I think that's it
right there. I've got to unscrew this. See, here's the backing piece. It looks kind
of like the other one, but slightly different. And these little protrusions
there is where I'm going to plug in the little fitting. Now see, this little
fitting here would fit in there if you're hard wiring it right to the
existing electrical, and make sure I've got the right one, because I think this
gets snapped in like that on the backside, and then this just gets plugged
into that other fitting. See the three holes? There's two close together, and
then one. See those prongs? Two close together, and one. Here's a little fitting
here that fits into that slot over there, and I'm going to plug that straight in
there, and that's going to work. But before I do that, that's good. I'm happy about
that. Okay, I'm going to get up there and put this in. I think it just kind of snaps
in there. Make sure you get it in all the way, because I don't think I have it in
yet. Maybe I do. Wow. Seems like it should snap, but oh, there it goes. Wow. Yeah, see?
It snaps over some little clips, and it fits in there. If you don't have that
pushed in there, I'm glad I tried that, because if you think it's in there, and
you push it all back in here, and you get ready to hook it all up, it could slip
back out of there. Okay, make sure that I've got this angled in the right
direction, and then I'm going to reach around and plug that, plug that in, push
it up in there. Make sure it's up there tight. I made sure that my connection
was tight, and it may chirp at me again, so I'm just going to have to kind of be
aware of that. I'm not going to be too concerned about that. You see it chirped
again. Until I get it mounted, and I've got to reset it, and make sure that the
battery works, and all that, so it could chirp a couple more times. Okay, so now
it's a matter of putting that in there, and twisting it into place. You may be
wondering what this is here. This is just a little tag, and it's attached to the
battery. Now you can slide the swivel this battery out, and all that, but it
comes with the battery, and this says remove tab to activate battery. Pull in
direction of arrow until, until solid black bars can be seen. Okay, just pull
this. All right, the solid black bars there. All that does is now that
activates the battery, and if I wanted to check that, I could pull this open, and
close it there, and all that. Okay, that was simple enough. What now? Down here at
the bottom, we have a test button, and I'm just going to press this, and see what
happens. I don't know if anything's going to happen or not, but it should. Wow, that
was pretty loud. You know what? I think it's working.
