How to Remove & Install Smoke Alarms/Part 12 ADDED VALUE

VideoJoeShows
86 followers
78 Video Views·May 16, 2026
How to remove & install smoke alarms Part 12 added value is what this DIY howto video is about. VideoJoe is right in the middle of installing some new smoke alarms that are replacing some existing smoke alarms he is removing. Now here's the question...are all smoke alarms created equal? No. Go to the hardware store & see what I mean. You can get smoke alarms from $25 all the way up to $75....apprx.. Take your time when you are at the hardware store to look at the different smoke alarms they have before you just pick up a couple off the shelf to purchase. Watch & learn as VideoJoeShows you what VideoJoeKnows...how to remove & install smoke alarms Part 12 added value. Nice!
Okay, so for this one. I'm pretty much done other than I got to pull my plywood down. I've saw some little
Some dust and some ghost bunnies up there dust bunnies
Is what I was trying to say you know and I'll sweep that up and clean that up
last thing you want is is to see that you were ever here, okay, and
Like I say when I get done. I'm not just installing this one
I'm gonna be installing a couple more, but I'm not gonna make that part of this video
But if this was the only one you were installing now you can turn your breaker back on make sure you turn your breaker back on
Because this was a hardwired one. I turned the breaker off first, so I didn't shock myself or anything like that and then
Turn the breaker back on before you push your your your test button up there your reset button
Okay, if I were to press the reset button right now before turning the breaker on
It could set just the battery, but not the hardwired section
Do you see what I mean because powers not on so if I press that button now
Maybe it chirps, but then when I go downstairs and think oh man
I have to turn the breaker back on I turn the breaker back on then after that
I'm gonna have to press that button again
Do you see what I'm saying you want to press that?
After you turn your power back on
Okay, and then it'll go through a cycle, and then you'll know that it's all
reset
Okay, and incidentally if you have more than one smoke alarm on your at your house at your condo
Whatever, and you're only replacing one then what I would say after you turn your breaker back on
After you press your test button up here go back to every single one of your smoke alarms and press those test buttons
It's a good idea to go ahead and do that get my habit of doing that to make sure that those are set
properly and it cracked me up to
It's like it's like. How are you supposed to know that this that this?
Lithium battery is gonna last
for
Ten years and stuff and I've started reading
This is this is one that I'm gonna be that I'm replacing and it says weekly testing
Look at this weekly testing is required. How many people do you know are gonna weekly?
Test their smoke alarms every week for the next 10 years
Nobody and I mean nobody's gonna do that. Hey if you want to go ahead
Go ahead and do that if you want, but nobody nobody does that but every once in a while
I mean maybe once a year go ahead and do it turn your power off turn your test
Press your test button or whatever test it
Some have a test button and a reset button and a test button or something this one just happens to have one button
I've seen other ones with two and different things so so not all smoke alarms are created equal
Okay, all right
Test your skills at it, and I'm sure you'll be able to do it
You can do one guess what you can do all of them and save yourself some money
For sure Oh
Spaghetti Oh
looks like it's time to replace this smoke alarm, but
This was actually this smoke alarm is actually only seven years old
I'm gonna hook it back up here and show you
How it how it comes down just so that you know and
This one I've already shut the power off. I'm gonna take this down now. It's got a little side
Deal on the side you got to push on that
Here here. I've got a new. I've got a new smoke alarm you see that little side
Button right there. You just kind of push up on it and that
Takes the pressure off of your little clips, so I got I got a push. I got a push on that and then
Twist it and then it will come down
and
Get that pulled off, and that's where we were on the start
And it's time to replace this, but yet this this smoke alarm is actually only seven years old
Why am I replacing it well?
We've had some other seven-year-old
Smoke alarms in the house, and I know it's about seven years old because on the date
On the back look says
2014
Says
2014 right there sit
right there
And so I know this one seven years old even though it says it's supposed to last for ten years guess what I?
Just had a couple of them go bad on me
And I thought I might as well go ahead and replace them all
And there's only we have a couple more to do it replacing four total
I've got some other videos on my channel that show how to do stuff
I got the I've got the power off
So I thought I might as well
See the other one went off in the middle of the night and this one didn't but I thought it wasn't go ahead and change
it out anyways
And that's why I'm doing it
Okay
I've got the mounting screws
To take the trim off and all you have to do is undo that
Those screws a little bit
Okay, and then this should come it's this part should come off and this one
Might not come off because I it looks like I put a washer in it
From before because it had cracked out
the backside
And it looks like that's what I did
See there's a little there's a little washer up there
No, I'll keep that washer. Hey and see that this this unit
Go ahead and put the screw back up here this unit
I
Don't have to replace it. I can keep it and in theory. It should last another three years, right well after I
Replace everything if something happens with another one. I've always got a backup
Always have yourself a backup if you can and incidentally
The screw that was in here before stripped out and you can take a regular sheet rocks
Drywall screw inch and a quarter put it in it works. Just fine
Okay, and so like I said, I got the power off
and
Always a good good thing to do that before you start messing with power
I have done these hot before if I couldn't find the power
the breaker like at a condo complex and
I've had to do that before but I really don't like doing that then I would do one
One wire at a time be real careful and stuff
But always it's best to shut your power off now see here's the harness assembly see this right here
And it's hooked into it the old harness assembly
Look at that
This is the old harness assembly that was from
Another smoke alarm previous and I I don't know why
Whoever installed these did it
Did it that way?
But they did and it's really not a good idea to do that
I painted this condo and I took the smoke alarms down when I put them back up
I thought well if they're working now
I'll just go ahead leave that old harness up there and I don't have to take the wires off
It'll be quicker and so I left it, but I really shouldn't have once I found it
I should have replaced it now see I got two red wire nuts because there's two white wires two black wires
And there's only one red wire up here, so the red wire
Is only connected with this orange wire nut so of course I'm going to use the orange wire nut
To go back on the red and the red wire nuts for the white blocks that makes sense
do that and
I got the new smoke alarm
Usually it comes with the wire nuts, but this particular one did not come with any wire nuts
I don't know why I think it was maybe they just don't do that anymore
to save costs on their end and
Some electricians they frown on
Using old wire nuts, so if you want to use new wire nuts always have some extra ones around now
See here's the new harness assembly
Okay, and on the red one. They always leave that little plastic thing on there
And you pull that off if you're gonna hook up the red some hardwired ones
Maybe at the end of a line, maybe you're only gonna have a red black and white wire up there
No red wire, so if you don't have a red wire
Up there your harness
Just just leave that little cap on there like that see
Or you could take that off and put a little blue wire nut on there an orange one
Something like that, okay
all right, so
now
I'm just gonna kind of bend this down and let's do the red one first
I'm just gonna bend that down use my little orange wire nut
And screw it on there
once I have it on there I
Feel it's tight try to do it a little bit more
And then kind of pull on your wire make sure it's not gonna come off you'd be surprised sometimes
How wire nuts have a tendency you think it's tight and you think I'll just pull on the wire
And you pull on it son of a gun it comes right off. I've had that happen before
Okay, I'll take my red wire or my white wire
White to white
Okay pull on it
Everything looks fine. See I don't have to pull these wire nuts out any further
They're all pushed up in there. Just right pull it down to where you can reach everything
comfortably
Okay, black
goes to my black wires
obviously
Make sure you get it on there all the way
Sometimes you got to hold your mouth just right keep that from spinning
Keep your black a little black wire from twisting and pull on it. Okay, it looks fine
Okay, now I can push that back up try to keep your fingers
Off your white ceiling, okay?
Well somebody's gonna know yeah, I saw that you replaced your smoke alarm. How do you know?
I see all these black grubby fingerprints all around there
Okay, push your wire nuts up far enough so that they're out of the way
So this is going to go up and have enough room to push up in there in the middle
You don't want your wire nut hanging exactly where you've got to push this that it makes it kind of difficult. Okay?
All right so far so good
Let's just keep her going here. I
Got my new mounting bracket
I'm just gonna push up there. I've got my screws up there
and
I'm just gonna slide that whichever direction it goes see this ways for one size box
This other ways for another size box, and then there's another one
and you match your your
your wire your
mounting screws appropriately
We're supposed to go or if the last person didn't
How to install properly and if nobody's painted the ceiling you'll you'll you'll know where it goes
And maybe they ran it a different direction
Or maybe they didn't put it in tights, and you might want to line it up with your paint marks on the ceiling
Let's say
I'm gonna make that snug
This one's a brand new and so this screw shouldn't dig up in there
But but you just don't want to do it too tight you ram it all the way up there
You could break your your plastic off of your off your mounting
Bracket, okay
Okay, so now
You want to you want to make sure?
You get this hooked up right because if you're not paying attention
You could you could put two of these prongs in there thinking your third ones on there, but you have it off
Little cattywampus, and it doesn't click in there just right you know I've seen it happen before
Snaps in there. I've already put the date on there the date of the install the date of replacement and
It's got a yellow tag here this this
another tag I just leave all that stuff on there and
sometimes if you do this with a black felt-tip pen for the date of
Replacement or something you might want to put that facing this way
There's there's a couple of different
Directions this will fit you know see right there is tight, and I can pull it down and move it around and
Do it a different way, but this seems fine right there. I want to make sure it's pushed up
tight all the way around if it's not you might click it on and
Half of it might be hanging down as I twist this to the right
It should chirp and then that will tell me that the batteries been activated properly
Now I can keep clicking it
It it went a couple more times with it, and so it's it's up there tight nice and snug
And so you take it down. I would have to push on that little
Thing to get it off the clicker before I unscrew it
Until you push that in and
And raises it off. It's just a little knuckle thing that clamps on where that dip it that it is
see what I mean and
Well, that's it
Now before I call that good. What's the last thing I have to do?
You know I've got it. I've got to turn the breaker back on and then once I turn the breaker on
Because this is hardwired once I turn it on all I have to do is press that button up there
And it will go through a cycle some of them have two buttons up there once a reset button one might be a test button
Just have to look on your directions and see but I'll get up there later and push that I've got
Another smoke alarm to install and so I'm not turning the breaker on just yet
but once I get done installing all my smoke alarms, then I'll turn the breaker on and
Power will be up there, and then I'll go around and press the test button
And the reset button
And then we'll go through a cycle of chirp and do that you have to do that to all your all your smoke alarms
Even let's say let's say you only have two you decided to replace because you know those were bad
And they weren't working, but yet your other ones you the other three in your house. You thought we're still good
Once you turn your breaker back on or once you turn it off first
Then you know that once you turn it back on after you get your other smoke alarms hooked up
You should go back and press your test button reset button on all of your smoke alarms. Okay. Don't forget
It's really important that you do that
Now if you feel there's something that I didn't go over
Now you've still got more questions
I've got a ton the smoke alarm videos on my youtube channel go to my main YouTube channel page click on
Playlists then scroll through the many topics I have on my channel go down to smoke alarms click on there, and it will shed it will
Bring up all of the videos that I've ever done having to do with removing smoke alarms testing smoke alarms replacing smoke alarms installing
smoke alarms carbon monoxide
Smoke alarms and all that kind of good stuff, okay?
so
Check those out, too
if need be
Well, that's all I got for this time, but I'll be back with more
Videos and what am I going to talk about next time well?
If you watch it might have something to do with another smoke alarm kind of like this
But it probably is going to be how to install a smoke alarm carbon monoxide
Combination smoke alarm why am I going to do that? You'll just have to check it out to find out
