http://www.VideoJoeKnows.com How to adjust kitchen cabinet doors is easy, when you know how. I'm talking the concealed hinged cabinet doors, for how to adjust. Most homes now days come with this type of hinge on cabinet doors in the bathroom, kitchen, storage rooms, etc.. Knowing how to adjust these doors is always a good thing, but you probably didn't really know how to adjust them did you. I hate it when kitchen door hinges are loose, cabinet doors rub together &/or hit the drawers, etc.. If only I knew how to adjust the kitchen cabinet doors once & for all. You will.....once you watch "joe" !! http://www.VideoJoeKnows.com
Video Summary
AI Generated
<html>
<head><title>404 Not Found</title></head>
<body>
<center><h1>404 Not Found</h1></center>
<hr><center>nginx</center>
</body>
</html>
Looking at this door here, the door is kind of hitting the bottom of the drawer
and also when you pull the drawer open
it hits there and it's pulling this open.
So we're going to take a look at that and see what's going on with it.
We're going to make the attempt
to see if we can adjust those screws so that we can slide.
We want to try to take this cabinet door and slide it down
before we start
seeing if we can adjust the drawer. That's usually the first thing
that you want to try first. If the door doesn't make it work
then we'll look at the drawer next. In order to get back here you see
that it's going to be kind of tricky. I'm going to have to get way back in here
and do some finagling. So I'm going to have to move some stuff out of here first.
Make sure you always have
everything moved out of your way before you get in there and break something
or you can't do it because stuff is in your way.
We're going to move this stuff out of these cabinets. This is something you really want to invest in.
It's just a little knee pad. It's like a gardening pad and
I keep this for all my stuff so
when I kneel down I don't kneel right down on the ground.
It works out very nice for my knees. I really like this.
It only costs a few bucks. I'm going to use just a little
flashlight. It's always kind of handy to have one of those around
to get into dark corners and stuff. I've got most of my stuff out of the way.
This particular cabinet has some sliding trays out here.
It's kind of nice but they're in my way.
So most sliding drawer slides like this
have a mechanism to loosen up
on the side here somewhere underneath. This particular one doesn't so I wanted to
just show you.
You just look around. There's some notches on here. This whole tray kind of
pops out of the whole unit. So we're just going to
gently lift this up out of the tray
like that. Now we've got
plenty of room to work. I'm going to do that with this bottom tray too
just so I can get to the hinges. The hinge is way down here.
So then I'll have plenty of room to work.
These two screws here, this top one
and the bottom one, they've got Phillips
threads on there. Sometimes you can't loosen them with the Phillips threads
and you start stripping out the head. Use your standard
usually there's a slot on there too. You can use a standard screwdriver on there
to loosen them up. Then you can adjust them with the Phillips.
Once you get everything adjusted and tightened down with the Phillips screw and you
think you're done
use your slotted screwdriver and
tighten it just a little bit tighter and
then you won't have this problem again. This is what you've got to do
to get in there sometimes and do some of your work. Don't be afraid to get right in there
down and dirty. Don't be shy to lay down on the job.
I want to show you these screws again because we did in fact have to do
something else too and I'm going to explain that.
Here's the top screw and the bottom screw
that we undid and that gave us a little bit of room because
the door was so high up I knew I had to slide it down there.
I did that. It was still rubbing slightly so there is
another adjustment screw. There's one right here. Not this back one,
this front one. That kind of pushes
this hinge in and out so it moves the door a little bit.
By playing with that one and the one down at the bottom of the cabinet door
you can push one in and pull one out
or do this one out, the bottom one in
and sometimes that moves your door just a little bit
and so we actually used two different adjustments on the door. I'll show you
how it works, how it looks. I've looked at my door here
and I've got a nice clearance here all the way
along here now. I didn't have anything here before.
I lowered the hinges down and I tightened
the screws on the back side of the hinge and then I also
played with that other adjustment screw that I was telling you about
and I got the door to kind of tilt down just a little bit so
my gap here is now the same as here
and I've got plenty of gap just in case the drawer ever wants to
slide down, sag in the future, whatever.
It's looking really good now.
This works fine, this works fine. So I can cross that one off my list.
We're on to another door. See this door here?
The hinges are loose, this bottom thing is loose
and we're gonna go ahead and take care of that now
and this is all floppy.
It's tight here, it's loose down there. In order for me to adjust this bottom
this slides in my way and
this is underneath the sink and
what I'm gonna do is I'm just gonna take this out of the way so I can get to here.
Sometimes you gotta do stuff like this but it's well worth it in the end.
So I'm gonna unscrew this so I can get down to this hinge.
This style of cabinet door has hinges that are
recessed hinges and if you notice there's
some screws here that is attached the hinge
onto the cabinet. Well there's enough slop there so if you loosen up those screws you
can lift the
you can push the cabinet door up or
down. You gotta do both sets of hinges and
we're gonna see if there's any, see like this one here? This one's loose
and that could be the reason why it's sticking.
We're gonna line this up, tighten everything down
and see what we got. We've also got some other
adjustments here but those adjustments are for
something else. So for this little particular portion
we're just gonna be interested in the top and bottom screws. There is
another adjustment, believe it or not, on these doors.
You've got this back screw. If you loosen up the back screw
I've already loosened that up and you can slide the door
out and in and that comes in very handy
for if you're lining up things. Now here we've got
we've got a double door set and
we want to make the line
the same and there's also the gap in between here
and this door needs to go in
and it needs to come out at the top. So there's lots of adjustments that you can do
with all this.
So again you've got the two screws here.
One, this one here, slides this.
This other one takes the door
back and forth. The other, you know, in and out right there and then you can
adjust those screws there to slip this whole door
up and down. So you've got quite a few things you can do
and if your cabinets don't look very good, if you have that type of recessed hinge
play with it and see what you can come up with.
The only last thing I want to point out on these cabinet doors,
I don't want to spend too much more time on this, but when you're tightening these up
don't use an automatic battery operated drill or anything like that
thinking you're going to tighten these down. Lots of times your cabinets,
believe it or not, on the inside of it are particle board, crushed particle board
and if you tighten these screws too much they're just going to start
spinning and then you're going to loosen up everything. The only way to fix that is to
go to the hardware store and get some bigger screws. So make sure you don't do that
or if you do use a battery operated drill, light touch. You don't want to just
spin it in there like you're going to tighten it up. We're going to take a look at this
doorknob here
and it's on a cabinet. It's oblong.
You can't really see it too well, but this is straight up and down.
I want them all to be straight up and down. And this one was off a little bit, but when I
go to tighten it up, it's still at an angle
and if I get it too tight
it's still not straight up and down. So I'm going to show you what we do with that.
I'm just going to have it loose and I'm going to undo the screw so that the screw
is in a slightly different position. I'm going to
just take your filled screwdriver and unscrew it just a little bit,
like maybe a quarter turn
and then tighten up your doorknob
and see how it fits. Now you might go the wrong way, then you have to turn it the other way, but
what I'm checking on here is some of the doorknobs
were loose in the cabinet doors, so I'm just tightening them all up
and once I have them all tight, I want them all straight up and down, so
that's our next little project. As we go around
the kitchen, you
tighten them up, but if you go to tighten it, like this one here,
I can keep tightening it and all that's happening is that the screw on the back
side
is spinning too, so you just get a Phillips screwdriver, hold the back side
and tighten that or tighten the screw at the same time. You just want it snug,
you're not trying to overdo anything. I know how petty it sounds,
but it's just something that's easy that
you can do nice, quick,
simple, by
tightening these up and lining them all up. It always
looks a lot nicer. I'm going to show you something here
in the bathroom. When you're doing projects around the house,
you might want to think about investing into a battery-operated drill.
This is a standard battery-operated drill, it's an
18-volt. You can get them in 12-volt, 16-volt,
18-volt. This just happens to be the one I bought.
It comes with two different batteries,
a battery charger, it's got a nice little flashlight in here too,
you can angle the head wherever you want, you can set it down.
I always make sure to
charge one of the batteries while I'm working with another one, that way
when one of the batteries goes down, I've always got
an extra battery charged. Nice to have, they don't really cost
as much as you would think. Go to your hardware store,
closest hardware store, see what they got, or one of the larger box stores.
They usually have things of this nature
for different prices, they go on sale, and different brands and that kind of stuff.
I'm not saying buy a Ryobi, that's just what I have.
I've got a nice container here with some extra drill bits
and stuff. It also is nice, a little magnetic
tip holder, which fits in here, and then you can change the tips,
and just kind of slip them in, and pull them out.
Nice little units these are, so
think about that before you do your next project.