THE ULTIMATE BOW SHOP BUILD

Exploring Ancient Crossbows
3 followers
3 Video ViewsยทMay 13, 2026
THE ULTIMATE BOW SHOP BUILD
AI GeneratedยทMay contain errors
Comments are disabled for this video.
Alright everyone, welcome back to the channel. It's probably super echoey right now,
but it will not be that way forever. This video is going to be like a multi-day series build,
and this space, this shop space, we're at a new location, we're at a new spot.
This is going to be our new studio slash bow room build. So this is going to be like
the ultimate bow room slash studio build to the best of our abilities without like going crazy.
So anyways, this is all about how we're going to do it. We picked up this bad boy
a little while ago, which will be perfect for storing all our stuff all throughout here.
I really like to stay organized, that sort of stuff, and then obviously the table.
And these cork boards are on this wall already. I think we're actually going to keep them,
but we're going to kind of move them around a little bit. And then this corner right here is
going to be the shop corner and video corner. And then freestanding bow press somewhere,
we got to set it up and get it figured out. And then we're going to actually put boards
on the wall to make it look clean, and then we have flooring to go in here.
So right now it's not much and super echoey, but at the end of it might turn out pretty cool,
maybe. Or it might look not so awesome, we'll see. But we just ran Home Depot,
we got a bunch of stuff. So we probably aren't going to finish it all today, but we're going to
try. We got these cork, or I don't even know what they're called. Oh, pegboard is what it's called.
And we built these frames on it because we're hoping that we can put these on the wall just
like that one is, but you can't put the little pegs hanger things with that one up against the
wall. So we built these little frames and we're hoping to stay super organized with all of our
archery stuff on the wall. So these are just little one-bys, keeps them flat, keeps them
off the wall a little bit. And that should be good, we're just going to put some screws in.
One step closer. This is like for department stores and stuff, you see this all the time.
But archery products, now we can hang a bunch of stuff on it, that's sweet.
So we got a bunch of these from Home Depot today. You can just slide it in.
We'll be organized Mitch, for once. Kind of.
So just imagine that full of archery products, that'd be sick. Now we just got to buy a bunch
of archery products. Nice. So this was just an old shop, there's like pressure valves and
everything. He was like a metal worker or something. So it's just a concrete floor.
This is like super cheap flooring. And we're just going to cover it to make it look a little
better and help with the sound. I think it'll look pretty sweet. All right, well, it's pretty
much taken all day to get to the step we are between Home Depot runs and getting everything
figured out. But we're putting up the boards. So on this wall, we're going to mainly keep it
corkboard. And we're going to do the boards on the bottom. But we're going to put the boards all
the way through here a little bit. And this has actually been pretty cheap for I think 200 bucks.
I think it was 200 bucks. We got these little one-bys, screwed it on here, just one screw right
in the center. And then we're taking little finishing nails and just kind of staggering
them, putting them up. But I think it's going to look really good when it's all done and complete.
We're hoping to get it done tonight. Might be up a little bit, but I want to try to get it done.
Measure once, cut twice. Measure once, cut a couple of times.
I don't know what to do with this one. I mean, we could just a bunch of times.
Or at least a few times until it breaks.
Well, last night, I stayed up pretty late. Got this whole wall finished, all underneath there
finished. Coming together. It's not very sturdy. Like, probably wouldn't want to be hanging big
stuff on it. But for a look, it's real nice. And that's all we're looking for is like a nice
backdrop. But yeah, we're going to try to finish today. We're going to do all that little L right
there, this right here. And then we're going to start putting the bowl press together and getting
everything else situated. Try to make a paper tuner, make a target stand for outside. Just make
this a fully functional where we can come in here, do a bowl build, and everything's just right here
ready to rock. But yeah, it's even changing colors a little bit. This wood was wet yesterday. Now,
it's already drying out. Okay, 49 inches. And for all the Ranger Ricks of the world,
I am no expert carpenter or builder. We're just figuring it out and doing it as we go. So,
whatever. There's one. We're almost done. Gotta take a little break. We actually made a podcast
room inside while batteries charged because we ran out of batteries. But we literally have eight
boards left and the wall is going to be complete. Then we'll get the paper tuner station set up.
And we're nearly there. So, I'm excited. Day three of the shop build. We have the awesome Matthews
glowing sign. We have a Lancaster banner. And we have the bowl press all set up. Last night,
set the bowl press up. And it didn't take too long. It's pretty easy. But the Last Chance
Archery Bowl Press, absolutely the best bowl press in the entire world. And you really cannot
convince me otherwise because I've used a lot of different type of bowl presses. But super pumped
that set up. This set up, we have the Last Chance Easy Press Bowl Jig set up, which is really
awesome. And I didn't have the other set up. Let's shut this door. And we're starting to fill
the wall of archery products. Believe it or not, I think this entire wall is going to get filled up.
But we totally underestimated the amount of hooky things that we need. We need to buy like 100 more.
So, that's going to be that. And a little bit should be all complete.
So, we just filmed a UV3 launch video. And we didn't have this. But this scope was the OG, OG,
OG. It had this cord that like snapped into place. And then this was OG 2.0, original gangster.
And I wish we had these for the film. I totally forgot about these. And this was a
lame cartridge for the UV2. This one you could probably crack in your hand.
It's funny. I get all the random prototypes that end up getting lost in the rubble. Yeah,
look at this battery stuck to it. Another original prototype. The battery's falling out.
We've come a long way, folks. Real long ways. That's funny.
Okay, everyone. Putting bows up on the wall.
Got a couple of them. And we got a couple more on the way. So, just trying to figure out a cool
way to display the bows in a way where they really don't get in the way. Because I feel like they
always get in the way. Scattered, laying on tables on the floor, whatever. So, we're going to figure
that out. Kind of mess around. See what works best. My end goal is to have a couple bows set up
always. I feel like I'm always stealing parts from different bows every time I make a bow build. So,
I just want them set up so that I can pick them up for whatever I'm doing. That's the goal. Is
that going to happen? Actually, I don't know. But that's the goal. Okay, everyone. The build is,
I'd say, 95% done. We're still waiting on some stuff that'll get in in like a week or so. But
we're going to give you the final tour. It took probably two or three full, full days. And then
just here and there, putting things together and organizing. But this is it. This is the shop
build. This is where we're going to be doing a lot of our bow builds, our unboxings, and just
messing around videos. Should we just go like, just go through it real quick? Like talk about it.
Okay. Well, I guess first, we kind of already talked about this, but the walls are 100% done.
We have a Lancaster banner up, B-Season plate from the Total Archery Challenge truck. And then
the bows are all displayed. I kind of wanted to figure out just a super easy, cheap way to
throw them up so they're not laying all over the place. These are just bow hooks.
Drilled a hole in, screwed them in the wall, and just kind of displays and make them look
cool. And then just an easy way I can just grab them and they're going to be ready to set up.
Be real. A kid actually made this for me and I forget his name. Maybe if you're watching this,
you comment below and give him some love. I forget what his name is, but someone sent that in. That's
super awesome. I love that thing. And then the Matthews LED glowing sign. We actually ran the
cord behind the boards, plugged it in here, made it look nice and seamless. This is sick. With all
lights off and everything. I love this sign. And then eventually, why it's not 100% done yet,
we want to build an arrow storage tube system right here. So right now we just have all the
arrows shoved in there. And then this is the wall of just miscellaneous archery products that will
continue to grow. And I still have some that I haven't even put up, but it just keeps things
super organized. I have all my shrewd weights, veins, stickers. I have mods, extra rests,
side plates, bunch of peeps, just random stuff that even I prefer it on here so I can see it
other than putting it in there and then you got to dig all through and stuff. So just easy,
quick things that you can kind of get to. And then I have my tags or whatever for tournaments.
Some of them up there, just cool. Their memories, like 2011 Nor'easter, 2012 Nor'easter. They don't
even have that shoot anymore. It's just cool to look back at those when I used to shoot good.
Just kidding. Not kidding. Just kidding. This table, we might actually get another one of
these tables, but we have our arrow saw, our fletching jig, last chance bandmaster pro,
bits and burgers. Just kind of like always ready to go. Plugged in, ready to rip. We,
of course, have our UltraView boxes that the pile will continue to grow. As I am their number one
supporter, I bought all those things. Just kidding. They sent me those for free, luckily.
Thanks, Colby. Opening up the first drawer. I wanted to get this giant, this thing was the
biggest one they sold at Home Depot, so we went all out on this. I didn't want any clutter. I
wanted it all clean, and this is going to continue to be filled up. But this is just like the grab
and go type stuff. All these aren't even full. Sight tape drawer that I still have a lot of
stuff I need to put in there. Release drawer. Sight drawer. Last chance randomness. Then,
oh, this is like stabilizer stuff. I haven't even filled that one up yet. This is scopes.
Kind of already talked about that. Big stuff in there. This is my sticker drawer. I think these
are pretty much empty. A couple random stuff. But that's going to continue to fill up.
And we're a functional system here. And, oh, that thing. That mess. This is what we film
unboxings on. We got it all set up. Mitch and I kind of rigged it out. We wanted a permanent system
that we can just plug and play for unboxings. We've got a lot of them coming up this year and
this summer. So instead of the hassle of setting it up every single time, we just rigged it all
right there. So literally all we have to do is turn on this monitor, whatever button it is right
there. Turn that on. Turn that on. Boom. And we are dead. No way. Let's switch that out actually.
I want them to see this. And I even have an extra spare battery charging all the time. Imagine that.
Switch that out. We got power running to everything except the monitor. We actually
want another monitor that runs strictly off of plug-in power. And boom. There's my hand.
So super easy. Ready to go. That's the middle right there. And just unboxings. Ready to go.
We got one giant light, two giant lights, and a giant microphone right here. And we got a couple
tripods and stuff for cameras. And we're ready to go. Whatever we want to do on unboxing or whatever.
We got this right here. Plug and play. I should actually undo this so it doesn't die on me again.
Oh and the floor. Floor's in. But we already talked about that. We're actually getting
some more floor. We're gonna do some more of this. Oh! Paper tuner. We forgot to do that.
So I kind of jerry-rigged a paper tuner system. I have a broken arrow that I jammed up here. And
this is an old sign from a convenience store. It rotates and stuff. But anyways, I bought this
cheap paper off of Amazon. I don't even know what it's called. Kind of rigged it up and you can just
pull it through whenever you need some more. Then we have our target hanging in the back.
So that's ready to go. All we have to do is have our cords. We got to figure something out
about that. But yeah. Got some stickers. And I really don't have anything else to show. That's
pretty much it. But hope you guys enjoyed this shop tour. There will be lots of videos shot in
the next coming months in this space. So it's super cool. Spent a couple days. Made it look nice.
Made it super functional and should be ready to rip. So thank you guys so much for watching.
Make sure to check out b-rollmerch.com and I'll catch you guys next time.
