NEW to us TREK PRO MICRO 3V Full Set-up

Defending with Past Crossbows
3 followers
2 Video Views·May 13, 2026
NEW to us TREK PRO MICRO 3V Full Set-up
AI Generated·May contain errors
Comments are disabled for this video.
Just to give you an idea though, if you choose to in the future go to 30, you're looking
at being...
I would set the pin for about 26, 27 yards, which would put you about an inch to three
quarters of an inch low at 30, and you'll only be about an inch to an inch and a half
high at 20.
It's kind of the best of both worlds.
Friends, welcome back to Blake Week on the OakShape YouTube channel.
Who's Blake?
That's him right here.
This guy who squat cleans more than I do, back squats more than I do, has bigger hands
than I do.
Jeez!
Well, today's video, we've talked Tyler into switching setups once again.
Sorry, Tyler.
Not sorry.
We are going to throw this on there.
We're going to break that down.
But here's the deal.
Wait till the very end because I want to give away all the things that we didn't use in
this video.
If you saw the Ultra video with me and Tyler way back there, we have a box of goodies.
It's going to be a reward system for all you subs, so you be sure to watch to the end.
We'll tell you how to win a couple thousand dollars worth of gear here from the channel
as a way of saying thank you for being excited about Always Be Tinkering.
Blake, we got the CBE site.
Let's break down, then let's show them how to get it doped in, and then I'm talking build
a site tape, and then we're heading to the archery range.
We are going to get you rocking and rolling with the Trek 3V Pro.
You are shooting a Matthews?
Yes.
You're shooting a V3X?
All right.
33.
All right.
There she is.
You are going to want to use the BridgeLock system.
The cool part about the Trek Pros, we have an integration bar that we can go ahead and
throw on there that is aluminum instead of carbon, so it just reinforces for those guys
out west who want something a little bit more robust and choose to use a Matthews platform
with the BridgeLock system, we've got you guys covered.
Let's go ahead and we'll start there.
Some unique features about the Trek 3V Pro is unlike some of the other three-pin models
within the industry, we have micro-adjustable first and third pins.
Your first and third pin is a micro-adjustable pin, which is a sweet feature when we're doping
them in because it's going to save us a lot of time, but also create a lot of consistency.
You have direct mount option, dovetail, and then obviously the BridgeLock.
Correct.
Okay.
We also offer a Picatinny mount.
I knew you would say that.
Yeah, it's there, man.
And you guys can get the same sight with horizontal pins as well.
Correct.
So you also have the standard Trek and then the Trek Pro.
The standard Trek is a direct mount with three horizontal pins.
The Trek Pro 3V is the vertical pins, and then the Trek Pro is going to be a dovetail
mount that can accept the BridgeLock as well as the Hoyt Picatinny mount with the three
horizontal pins as well.
Got it.
What about pin sizes?
Pin size offer in 0.0 and 0.19.
So when installing the BridgeLock mount, it does come with an extra screw that is significantly
longer than the one it comes with and a nut on the back side.
It's cut out?
Yep.
So that slides right in.
We put a little bit of Loctite on there and here we go.
To interchange his O-ring, I'm just going to pop that out.
Oh, snap.
Yep.
Super easy.
I'm going to take the yellow one.
I'm going to snap it back in, and now we're ready to roll.
If he chose two down the line, maybe for a tack or a 3D shoot that he wants to shoot
here locally, we can always throw in a lens.
For cheating?
I love it.
I love that.
So it does have a lens option.
That's cool.
This thing is a hammer, man.
All right.
Want to throw it on the vice?
Yeah, let's throw it on the vice and level out your first, second, and third axis.
So that's level, so I can adjust your first just a touch.
The T-handle would probably be easier for me to reach.
What size do you need?
The size that fits that screw.
All right, man.
So we got everything level.
We got a level on the string, we're level vertical, horizontal.
We've got our handski level here.
Looks like we're a little off on our first axis on the sight, so I'm going to go ahead
and break this loose.
We've got some room here to adjust.
Let's go ahead and put that in the middle.
So you're looking at this bubble.
This bubble to start.
Now, once I get that first axis dialed in, we're going to go to look at your second axis.
We come around here to the second axis.
We're dead in the center, so we really don't need to move it.
But if we do, we'll come around here to the front of the sight.
The screws are labeled third axis here on top.
We come down here for our second axis as well.
You can see it's engraved down there on the third.
So our third axis is down here on the bottom.
Our second axis screws is labeled right here on top for the second axis.
So we're good.
We don't have to touch the second axis.
Before we go outside, we're going to go over just getting you dialed in first.
You know, CVE does have a zero stop.
So what is a zero stop?
A zero stop is a position in your sight where we can roll this sight all the way up to the
top and it stops.
I like to have the sight all the way to the upmost vertical position so that we can utilize
all the travel on the sight.
And so that in those situations where maybe you've dialed your sight to 80 yards and that
animal decides to close the distance on you, you don't have to think twice.
You can go ahead and throw your sight back up to your zero stop and your pins now fall
into place 20, 30, 40 or 30, 40, 50.
All right.
So that's where we're going to start.
Tyler, tone down your personality a little bit.
All right, man.
So we're up close here.
Probably about 10, 15 yards.
Let's go ahead and just take a shot at the elk and let's just make sure that we're at
least hitting the target and close before we back up.
Somewhat.
All right.
So we're a little low.
So what I'm going to do is I'm going to move the whole entire gang adjustment.
I'll let you hold on to our pencil for me for a second.
So to move the entire gang adjustment so that I can at least help zero you in at 30, I'm
going to unlock these screws right here.
We've got four screws on the rail itself.
All right.
So being that you're shooting low, we are going to move it low.
You're low about eight inches.
So it's going to be a big move for us.
I'm going to slide that down.
It's right there.
I'm going to lock them hard, but I'm going to lock them enough.
Let's go ahead and take another shot.
It's coming down hard.
We're going to walk back to, what do you want your first pin, 20 or 30?
20.
Okay.
Are you sure about that?
Yes.
If we go to 30, it's going to screw me up.
I go 30, 40, 50.
So do I.
This year.
Blake, what do you run with a three pin?
30, 40, 50.
And I do it.
So you want to be different?
That's fine.
Yes.
You're going so long that you'll be like two inches high at the most at 20.
And honestly, when are you ever really going to take a 20 yard shot out west that matters
that you're still in the kill zone?
I was going to yell cunt.
Were we yell cunt?
We ain't never going to be 20 yards from an elk.
Just to give you an idea though, if we do, if you choose to in the future, go to 30,
you're looking at being, I would set the pin for about 26, 27 yards, which would put you
about an inch to three quarters of an inch low at 30.
And you'll only be about an inch to an inch and a half high at 20.
It's kind of the best of both worlds.
Got it.
Perfect.
All right.
So let's go ahead and I'm going to go pull your arrows.
Why don't you give me a 20 yard spot and we'll shoot to start there.
Boom.
Money.
All right.
So we've got our 20 yard mark.
We're dialed in.
What I'm going to go ahead and do here is make a mark right here on our sight tape.
And that's just going to give us our 20 yard mark so that we know where we can come back
to to set our zero.
All right.
So 20.
Now we're going to go back to 30 and these are the marks that are most important so we
can get a good solid 30 and 60.
What do you think?
Take another one?
Pretty close.
You are a little left the more we walk back.
So let's go ahead and just give you a couple of clicks to the left.
So easy, easy adjustments here.
We've got a lockdown screw.
We're just going to go ahead and loosen that.
We're going to turn the dial to the left.
We've got micro clicks, about 24 turns in between each line on our micro adjustment.
So go ahead and lock that down.
I like that, man.
You look pretty solid at 30.
Are you happy with it?
Yep.
All right.
So let me go ahead and make another mark.
We can do this one or two ways.
I would advise most archers to take their time.
Walk back 10 yards at a time.
Archers that are maybe a little bit more proficient and kind of can gauge the jump
from 30 to 60.
Some guys will jump all the way back to 60.
That's a big jump.
I think we should have maybe at least just go back to 50 before we go straight back to
60, just to make sure we're on target.
We're going to walk that sight down as we go.
Does that work for you?
Yep.
All right.
Let's go ahead and do it.
I'm going to say that would probably be about 40.
I'm going to say that would probably be about 50.
So we're just taking a guess, making sure you're on target.
Yep.
Low.
Way low.
Good shot.
Still low.
All right.
60?
60.
Warm.
All right.
Now we're at 60.
So we get a good 60 mark, we'll be ready to roll.
I like it.
It's a little low still.
Well, you're hitting a little left.
I want to keep your micro adjustment as close to the middle as I can so that we can keep
as much travel there.
On course.
All right.
So I'm going to unlock this and I'm going to slide us to the left just to give us a
little bit more travel here.
Help sight you in there.
Get our left and right to rolling.
Dot.
Love it.
Got a great group at 60.
We're going to go inside now.
I'm going to put another mark on that 60 yard mark for you.
And then from there, we are going to be able to dial in your sight tape.
All right.
So we just figured out with our sight indicator gauge that you fell into an H. So what I want
to do just to make sure to see if these match up is I'm going to check, do these gaps coincide?
So our 20 to 60 looks like we're a little off here.
So I actually want to try a shorter tape.
So let's go over to a G and I flip it over to G and when our 20 matches 20, that 60 looks
a lot closer.
We may need to go one tape shorter, but I think this is where we start from now.
I think this is a good place.
All right.
So we had the sight tape for G. We're going to go with, we're going to run it in the same
holes here all the way down to the bottom.
Usually I date a sight tape for quite a while before I, you know, got to give it a try.
Yeah.
Date it for a while and have some consistency, some no wind days, especially days where you're
shooting good.
Y'all know what I'm talking about.
Every once in a while you got the day where you're just shooting good.
That's when you really want to inspect all the little ticks and just take your time with
sight tape, man.
Nothing's worse than having a sight tape that actually isn't right.
You're going to, you're going to want to quit archery.
Absolutely.
What I'm going to do now is I'm going to take that sight, I'm going to dial it all the way
back up to our zero stop because at the zero stop is where we know that you were dialed
in with your top pin being at 20.
We shot 20, we shot 30 and 60.
We got that gap between 30 and 60 to give us the correct gap so that we could dope in
your tape.
Now we're going to go ahead and take your indicator pin.
Remember I removed all those set screws in here so that we can have enough room to dial
in that 20 yard mark.
It looks like that hole is going to work.
So we now know that your first indicator is at 20.
We're doped in up here on our zero stop all the way to the top.
We'll get you sighted in 20, 30, 40.
Once we get that 40 pin dialed in, all we got to do is then put our second indicator
right here at 40.
So we know your top pin is at 20, your second pin is, or third pin is at 40.
And then as you move your sight, you will always have two references knowing where your
top pin and bottom pin fall into play.
Guys, thank you for watching this video.
Remember, comment below, we're giving away those two free sights.
Thank you Blake for coming all the way down.
Tomorrow, we're going to go over broadheads that this dude slangs and I'm going to take
him to my favorite archery course in the entire world.
We're going to Spokane Valley Archery.
This is Blake Week.
This is the Elk Shape YouTube channel.
Thanks for watching.
Appreciate it.
