TAC ELK ARROW (PART 2) - Sight-In Process!

Defending with Past Crossbows
3 followers
23 Video Views·Feb 5, 2026
TAC ELK ARROW (PART 2) - Sight-In Process!
Comments are disabled for this video.
Dude, that's fricking, go, go show the people.
This is the one right here, you can't.
Oh, just under!
It's my last arrow.
Oh, ----.
Just slightly too much, man, this is the finish line.
So we built our arrows up right here, you can see.
I got a few more to go, but we've built a couple dozen
of these Easton 5.0s, five millimeter.
Now, I want to talk about the arrow
I have been running through this bow.
Killed all my elk last year with it.
This X10 Parallel Pro with the Podium two-piece,
man, I just really like it.
It is 450, I like the lighted Nox I chose.
I ran halos in Texas, two different trips.
You guys probably saw some of those videos, man.
It's better for you, you'll see the arrow,
and then it's better for me.
I knew right away when I made a good shot or a bad shot,
and so I like the lighted Nox.
I'm running this Excel, and I have this custom four-pin.
I don't know how I got it, but it is awesome.
I was thinking about trying the Excel driver
when it finally comes out.
It's not out at the time of this video.
I need to, I don't want to touch this.
The sight tape, the pin gap,
everything is dialed for this bow with that arrow.
So I'm gonna go ahead and take this sight out,
and we're gonna put a new sight in,
and sight in, and finish this video by sighting in
with this really expensive,
but significantly upgraded UV slider.
This is from Baker.
If you guys have never seen these, it's awesome.
Baker dudes out of Idaho.
We're gonna put string levels on it.
Oh, I got some right here.
So I'm gonna have it at 90 degrees,
and I'm already pretty close.
I'm gonna just loosen.
That's level, and if you need to adjust this,
you can just quickly,
but that's the fastest way to get a string level on there.
And then we're gonna take this bad boy out.
Make sure you silver Sharpie and have your marks.
We're gonna loosen that up, this bad boy out.
It's pretty obvious which one to use.
It's a great sight.
I love four pins, covers me out to 50.
I shot four elk last year in 2024.
The first one was 54.
I dialed to the exact yardage as my top pin, as the floater.
The second bull was in Idaho, it was a liver shot,
and my bubble wasn't level,
but I ranged two trees, 50 and 55,
and he walked right in front of the first one,
so I shot him with the bottom pin here at 50.
And then the third bull was the Utah bull.
I actually didn't end up killing him with the bow,
so let's not talk about that.
And then the fourth bull I shot was in Montana at 54,
and I dialed the top pin to 54.
Having multiple pins out to at least 50
will cover you in a lot of situations.
And elk hunting, it happens fast.
A lot of it's pre-ranging,
and then when the bull finally steps out or whatever,
it's gonna be kind of a guess, so know your pin gap.
We've done a couple videos on that kind of stuff,
like showing you really good, perfect practice
in the backyard so you're not just always
shooting exact, even yardages.
I recommend that.
This little guy right here, we're gonna bring it in.
Very light.
That's a really cool, good fit.
All right, so we got our levels on.
These are level.
This is also, that bubble is sitting very level.
You could put a Hamsky Gen 2 on real quick,
and there's a nice, nice spot for that right here
on this UV, so we're gonna do that.
And it's sitting smack dab level.
You can see every bubble's in the middle,
and this bubble is in the middle on the sight.
If it wasn't, there's a 964 Allen right here
where my finger's at.
I know it's dark, guys, but it's there,
it's hidden, it's one.
All you have to do is crack that,
and then it says right here, first and second axis.
All you have to do is get a little driver in there
and turn it right or left, watch your bubble,
and get it absolutely perfect.
If I were to say anything about this,
I'm slightly bubble right, so I'm gonna go ahead
and make a teeny tiny adjustment.
So I'm gonna crack this guy so it's loose,
and I'm gonna stick this one in here,
and we're gonna move it just slightly too much, man.
This is the finish line.
All right, just tighten the, basically,
your set screw in the bottom, that 964.
Bubble's in the middle, middle, middle.
That's good, you gotta do that step.
Now, third axis is something we'll have to shoot in,
maybe when I'm off crutches.
We'll head over to the steepest hill we can find.
I generally start third axis shooting downhill.
I'm better at those.
Uphill, we'll do secondary.
Third axis is just essentially making sure
you're not way right or way left
on steep uphill and downhill angles,
and they're always opposite.
So if your third axis is off, you're shooting downhill,
and all your arrows trend left.
If you were to do the same shot going uphill,
all your arrows would trend right.
So third axis adjustment is just simply,
right here, there's a set screw,
and then your third axis adjustment
is this driver right here.
I recommend shooting that in on a day
that you're shooting really well.
We will do that before spring bear,
but today, that's gonna be good enough.
Now we need to set up a sight tape for this.
To sight this bad boy in, you have five pens.
The middle green is fixed.
You can adjust it.
So you wanna use that as kinda like your home pen.
So what we need to do is find 20 yards
where that middle pen is hitting 20,
and then we'll put our sight tape indicator
on the side here.
I think it's already on there.
Then we'll walk back slowly.
I'll crutch back to 60 yards using the same pen
and see where that hits.
And that will basically tell you
what number of sight tape to start with,
where you can kinda get close from there.
Might take you a couple weeks to figure it out.
You can always take the housing out
and get your pens to match up with the sight tape,
although I don't know if that's the most accurate way
to do it.
I would suggest, once you get a sight tape,
is to just manually shoot in each pen.
Take your time.
Double check or inspect your sight tape over several weeks.
Don't set a sight tape up in a day.
Don't set a sight tape up in a day you're shooting lousy
or that it's windy.
Real cool, calm.
So we're not gonna be in a rush to do this sight tape.
We're just gonna try to get close real quick.
And then at the very end,
I'll kinda explain why I chose the Easton 5.0.
I removed the stop out of here
so I have full elevation.
This is your stop.
You can see it's just, I just popped it right out.
Dude, that's fricking, go show the people.
That's right where I was aiming.
That's 20 is there.
Riley set me all up.
Thank you, Riley.
We got this Razor 56 with the mag view set up here
so I can kinda see.
Riley was nice enough to tape me a horizontal line
and put the 365 underneath it in case we're low.
We did not do what I said to do,
which is walk back slowly.
So we're just kinda guessing.
All right.
Just barely above it.
And I guess that was a pretty clean break.
I'm definitely shooting a little left.
So I'm gonna, this is a great windage adjustment.
I just pop this out and go towards the arrow.
About six clicks.
How do you guys like my short shorts?
I'm insecure about how short they are.
Whoa!
Too far.
I also don't suggest sighting in and sitting down.
It's hard.
That was not a good break.
Okay.
So I'm gonna move my sight.
Disregard that arrow.
That was a bad break,
but those are right in there.
Pretty flat shooting, my goodness.
They're all a little high.
Move it up.
Try it again.
This is the one right here.
You can tell.
Oh, just under!
Move it down barely.
So if this is the right one,
then we'll take our phone and take a picture
because that ---- is hard to read
and see what number is.
And then whatever number it is,
is the sight tape we will date for a couple weeks.
Oh, so close.
No wind to speak of.
And that's never the reality here.
We're in a wind tunnel.
Awesome day to do this.
All right, Staten.
Put her on the dot.
I felt really good.
Right, that is so close to the line.
You can see I'm stacking them.
It's my last arrow.
The point for this is for you guys to see,
like, this is a delicate process.
Don't be in a hurry.
Wait for the right conditions,
the right lighting, everything.
Okay, we're high.
I went too much.
That was just a little high.
Like, that was it, right on the line.
Good clean break.
Stack another one in there.
Oh, ----.
Why are you laughing?
You heard the sound?
Okay.
We just hit two arrows right on the line.
We found 60.
What number is that?
I couldn't freaking tell you.
I have to literally grab this phone,
go to photo, zoom in,
and then zoom in.
Looks like we're a negative five.
We're right on a negative five sight tape.
Here we are.
And what I ended up doing was
I took sight tape number five,
you see it's missing,
pop the cartridge out,
line up my middle pin,
which is gonna be a 40-yard pin,
and move all the pins,
so 20, 30, 40, 50, 60,
all match the sight tape to start with,
put it back in,
took number five,
taped it to the plate,
put the plate in,
so over here you guys can see
I put this plate in,
and then because my middle pin
is set for 60,
I loosen this indicator,
and I don't know if you guys can see this.
I'll try.
But I loosened the indicator
and I matched it to 60.
So right now my middle pin
is dialed at 60,
and the indicator is dialed at 60.
My middle pin is gonna be 40,
so I'm gonna slide up to 40 yards
and lock it in place.
So now 20, 30, 40, 50, 60 are dialed,
and then I need to decide
which pin do I want to be my floater.
I can tell you right now
it's not gonna be the middle pin.
It's most likely gonna be the top pin,
and then for the bottom pin,
I will put the same sight tape
on the backside,
and I'll have my bottom pin
start at 60 and go from 60 down.
So I'll be able to slide
if I need to get really,
shoot really, really far,
and I need the maximum clearance,
I'll use my bottom pin
at the bottom of the housing.
For most shots,
like especially like tack and stuff,
and stuff I wanna dial the exact yardage,
I'm gonna use my top pin.
So the last step I have to do
is loosen this indicator
and move it up.
And so now my top pin
is at 20 and 20,
and then I'll add in my stop
so that the slider stops at 20 yards.
So that's cool, that little stop part.
Why did I pick the Easton 5.0?
Why am I leaving the Easton X10 Parallel Pro in the dark?
And I'm not,
I'm pretty much convinced
that the 300 spine, 8.4 GPI,
standard hit, number two collar,
gives me the most flexibility
to bolster the FOC
and the total arrow weight.
I can manipulate this.
If I wanted to make this heavier,
I could just bump up to 150 grain broadhead.
What I'm probably gonna do
is run with 125 grain broadhead,
and I don't know what the broadhead's
gonna be for 2025 yet,
but we'll make a video once we know.
Oh, we'll make a video.
But right now,
we're gonna sit at 125 point,
18 grain collar,
16 grain hit insert,
8.4 grain per inch,
six grains per vein,
eight grain standard knock.
IP5 from AEE.
I'm probably gonna throw a knock on there
that weighs 10 grains more.
It's gonna bump the total arrow weight up to 420.
So I'm probably gonna shoot an elk
with a 420 grain arrow
and be right around 300 feet a second
with this bow.
That is my selection.
That is why I picked this arrow.
I think it's great that Easton finally replaced,
not replaced,
that's not the right word,
but gave us a different option,
similar to the Axis,
but a lighter grain per inch.
A ton of options for components
that make you feel better.
I personally think you guys can't go wrong
with the hit insert and a collar.
It's a great marriage.
And then you can pick 100, 125, 150
to get you the right total arrow weight
and still breathe pretty light.
And I don't believe in like going in super light arrows,
but I don't really believe
in going really heavy either.
I think that is not our argument here today.
I've killed a lot of elk with 505 grain arrows.
I've killed a couple elk with a 425 grain arrow.
And most likely I'll be shooting elk
with a 420 grain arrow in 2025,
Easton 5.0,
separations in the preparation.
Go build that elk arrow.
We'll catch on the next one.
