Bugatti Royale- the most extravagant car ever? | Tyrrell's Classic Workshop

RC- Car
12 followers
AI Generated·May contain errors
Comments are disabled for this video.
Hello and welcome to another Tyrell's Classic workshop.
I'm out of the workshop again, and I'm here at His Royal Highness Prince Albert Collection Museum in Monaco.
I've been over here inspecting a car in the museum with their kind permission,
but just as the stars align with one another,
I couldn't resist making a video of this as I was walking past it.
It's here for just a few days only.
It has been here as part of the Monaco Historic Grand Prix 2026.
It made a special appearance with Prince Albert actually taking part in driving the car around the circuit.
with the president, I believe, of the Automobile Club of Monaco, if I'm not mistaken.
This is an incredible piece of automotive art.
There is simply no way to describe it as anything else.
This is the ultimate Bugatti. It's the ultimate statement of the 1920s and 1930s.
I'm going to say this contentiously: it's just an outrageous car in every respect.
This is the Bugatti Royale Type 41, and they only made six of them.
It's an extremely rare car.
This particular car was Ettore Bugatti's own vehicle.
He made this as his demonstrator to showcase before royal families, dignitaries, and senior leaders.
Your average world leader, and his dream was actually to sell these.
He used this as the demonstrator, but this is not the original body.
To the best of my recollection and knowledge, this car has had at least four bodies during its lifetime.
Again, it's a body-on-frame or body-over-chassis design.
You have this massive steel frame running the entire length of the car, which supports everything.
Suspension, brakes, steering, engine, gearbox, but also the entire body is mounted on top of the chassis.
That's why you could change them.
You could unbolt the body, remove one part, and create a new hood to align with the rest of the body.
It was Jean Bugatti, Ettore's son, who actually designed many Bugattis.
Designed this body with this sweeping curve here.
It's called the Coupé Napoléon.
They made a total of six Royales.
It was the biggest marketing flop in history.
No one bought them because they were too expensive, too large, and the timing couldn't have been worse.
So they ended up keeping them all, basically all six of them.
It has a straight-eight 12.8-liter engine,
and this engine was in the typical Bugatti fashion, inline, aluminum,
which is actually very unusual for the 1920s and 1930s.
The engine was a quite reliable and robust unit.
It developed 300 horsepower, 300 brake horsepower, which is 25 brake horsepower per litre.
That isn't much, but it's enough.
This was actually one of the fastest cars of its time.
It's not particularly well known, but this car was very fast.
So, basically, most of this large hood is actually occupied by the engine,
But essentially, because it's a straight line of eight cylinders, the engine is long and thin.
This was the kind of fashion, the very spirit of the era at the time.
That was the way things were done—actually having an inline engine.
or at worst, a V, like Cadillac had their V16s,
to actually fit in a fairly narrow hood area here.
But the problem was, when you developed an engine with eight cylinders in a row,
That meant eight separate bearings on the crankshaft.
And what used to happen was, due to the pulsations and the length of the crankshaft,
It used to receive deflections, as they are called.
This means the crankshaft moved during operation, especially at higher RPM.
It became a problem. As engines grew larger and cars became heavier,
The days of the straight-eight engines were truly numbered.
I think the Rolls-Royce Phantom IV, in the 1950s, was one of the last straight-eight engine cars.
the B80 engine, as it was known.
And this was somewhat the peak of the straight-eight engine.
It was the ultimate, perhaps because it was a cul-de-sac.
It is one of the ultimate iterations of the straight-eight engine.
The fact that it can fit under this narrow hood area.
And over time, of course, the V8 engine came into prominence.
and that was a 90-degree V8 engine for proper firing pulsations at 90-degree intervals.
And that necessarily made it wider, so the front end had to grow.
The perfect example is the Rolls-Royce Silver Cloud.
that had the V8 engine which Rolls-Royce introduced in 1959,
But it was a very tight fit, so tight that you had to reach the spark plugs through the inner wings.
There were access panels on both sides of the Silver Cloud 2 and 3.
It reached the point where the bodywork was forced outward,
And that's when it began to merge seamlessly with the front wings.
Then we got the Silver Shadow as the Rolls-Royce example,
which was a square, bluff front end in comparison.
And they placed a V on top of the hood to make it look like a traditional coach-built car.
but actually it wasn't.
It had the 90-degree V8, and it featured a significantly wider engine aperture.
and even shorter in that regard, because the V8 is so compact,
It's more like a cube, and this one is very long and thin.
So, once again, this is an incredible feature of this car,
The fact that the engine was so huge, and I don't know what its redline is.
I'll check the dashboard and see, but it can't have been much.
because it simply couldn't handle the twisting motions, the torsional vibrations,
the deflections I've talked about
But the beauty of straight-eights is that they sound absolutely gorgeous.
Well, it doesn't even have a tachometer.
I suspect the chauffeur knew all too well when the engine began to vibrate and flex the crankshaft.
Heaven forbid it would flex, actually, but certainly vibrate.
The chauffeur would know all about it, and that would be the right moment to shift into the next gear.
You actually know when the rev limit is just by the feel in the seat of your pants.
rather than an instrument on the dashboard.
And driving something like this, we know it was fast,
But the passengers don't want to be shaken, rattled, and rolled, thank you.
They want to drive very cautiously.
So, yeah, the straight-eight did its job, but only at low revs.
I suspect it was probably limited to around 2,500 to 3,000 rpm.
But interestingly, the chauffeur has his telegraph here at the back.
There's a blowpipe, so you can talk to the chauffeur in the front.
which, once again, was present in many cars of this period, so you could instruct them to...
I'm sorry, but the second-order crankshaft vibrations are starting to be felt through the back seat.
Could you please slow down a bit? Something like that.
In fact, the engine was so reliable that Ettore Bugatti was challenged to build railcars.
Railcars were all the rage.
Different countries were experimenting with them.
Internal combustion engine railcars.
Single railway carriages, identical at both ends, so they did not need to be turned around on a turntable.
And Ettore Bugatti had a railcar set, which I believe was either two railcars, as far as I recall, or three.
Or three carriages, making an extended version of a single one.
And it was powered by either one or two of these engines.
And they were used in service.
They actually covered miles.
But the Coupe Napoleon has just so many interesting features.
This bodywork is called Coupe de Ville.
In other words, it's a sedan.
It's tailored for urban use, so the chauffeur was exposed in the open,
and the passengers were settled into this extremely luxurious rear compartment.
And they had the special plaid, brocade, and velvet upholstery.
And the driver had to make do with slippery leather seats.
That was of poor quality.
Something to cover the chauffeur's compartment was leather.
The Coupe de Ville has four skylights in the roof.
Why not?
One of the other coachbuilding techniques around this time was what's called a Sedanca de Ville.
That means it's similar to this one, but it actually features a removable sliding panel.
Extremely heavy.
There is a flap that latches either up or down.
And the removable sedanca panel comes over and joins with the top of the windshield frame.
And that is called a Sedanca de Ville.
So you could have it either open in the chauffeur's compartment or closed.
Rolls-Royces had the Phantom 3s.
Many cars had Sedanca de Ville bodywork.
It was very expensive due to this additional complexity.
But it was also heavy.
It made them a heavy car.
You had a lot of bodywork and this large sliding panel that weighed a considerable amount.
because it had to be quite rigid by itself.
And one of the other interesting things about this car is the 24-inch wheels.
So it's amazing how things have come full circle.
No pun intended.
Because we now have 20-inch wheels on Range Rovers, Rolls-Royces, Phantoms, and others.
But this car pioneered the 24-inch wheel.
The wheels are actually the brake discs.
The brake drums, rather.
So it's cable-actuated brakes, link-actuated brakes as opposed to hydraulic.
The wheel is actually a cast-aluminum brake drum with a steel insert.
Aluminum and steel have different coefficients of friction.
As the drums grew hotter, they would expand.
and the steel band inside the drum would no longer be quite the interference fit it had been.
Some fantastic engineering challenges.
Ettore Bugatti must have been a ridiculous obsessive, really.
We know that, but no car better exemplifies it than this.
The other thing is, the wheel is actually a turbine.
These vents, these slats are angled to actually promote air being pushed.
Because this is a drum brake, it is not a disc brake.
It actually forces air onto the drum inside here to cool it.
And this design, Bugatti naturally used in the Type 35, the Grand Prix cars, and so on.
And another thing that contradicts the car's age is the fact that some of the fittings on it,
The radiator is nickel-plated or solid nickel.
But then we have these headlights, these Marchal headlights, which are chrome-plated.
And decorative chrome only appeared in the late 1920s.
There are two types of chrome. There's hard chrome used for pistons on diggers and similar equipment.
And there is decorative chrome, used for cars, one-time shipbuilding, and similar applications.
The water can get through, which is why they are triple-plated with copper-nickel chrome.
But the nickel radiator, whenever it rains or gets wet, you have to repolish it.
because the water actually stains the nickel.
Since decorative chrome did not appear until the late 1920s, the very end of the 1920s,
This car actually has a combination of two.
And the mascot here, the elephant, was a trademark of Rembrandt Bugatti.
Ettore's son, who actually tragically died very young, before this car was actually converted to this body.
But this is a Rembrandt Bugatti elephant, which was a trademark of the Bugatti family.
This very familiar horseshoe-shaped friction damper, which was all the rage in the 1920s and 1930s.
Many cars used them. The Bentleys used them, and so on.
I can't touch this car. I do know who owns it, and I haven't had time to ask them if I can touch it.
So I'm not going to touch it.
The car is here for just a few days.
I couldn't resist making a video about it while I was here.
I first saw this car at the Mulhouse Museum, the French National Museum of the Automobile, several years ago.
Once again, the story of how this car actually ended up there—a story in itself.
There were two brothers named Schlumpf who lived in Mulhouse.
They had a factory above ground.
The Schlumpf brothers collected them secretly, using all the profits from the business.
They drained their manufacturing business to support their passion for Bugattis in particular.
What they did was build a secret underground room, massive in size, beneath the factory.
They actually secretly bought these Bugattis and stored them in the underground room without anyone finding out.
One day, when the business was in jeopardy due to their excessive spending, the workers revolted against the Bugatti brothers.
They broke into the underground car park and discovered their collection of cars.
This was one of them. This car weighs three tons.
It was one of the fastest cars in the world when it was built, as I said.
You can't imagine this hurtling along the autoroute or whatever at a very high speed, but that's exactly what it did.
Three tons, it's more than six meters long, over 21 feet long.
I give you the Bugatti Type 41 Royal Coupé Napoleon.
Well, thank you for watching. Please remember to subscribe. It is very important.
We'll be back with something else very soon.
