Victory HLR Arrows Hunt Long Range!

The Precision of Crossbowry
1 follower
2 Video Views·May 2, 2026
Victory HLR Arrows Hunt Long Range!
Comments are disabled for this video.
Hey everybody, this is PJ Reilly from Lancaster Archery.
In our video studio today,
we wanted to introduce you to the Victory HLR arrows.
So this is an arrow that's new from Victory
within the past couple of months.
And HLR, what that's gonna stand for is Hunt Long Range.
So these arrows are designed for hunting long range
or just shooting long range, like attack events,
things like that.
Basically, it's an arrow that's designed
for long range shooting,
whether you're hunting or you're shooting at 3Ds.
So it is a 204 diameter arrow,
which is considered small diameter.
You know, there's still one smaller, the 166,
but it's definitely smaller than the 246 diameter arrows.
So it is a smaller diameter arrow.
Of course, that's great for penetrating the wind,
shooting in the wind, it's not gonna drift as much.
And it's great for penetration on your animals.
So, but what is new and unique about this?
Well, Victory came up with what they say,
this arrow, as you can see,
you can see this is a carbon weave.
And this is what Victory calls 1.5K carbon.
What does that mean?
So 1.5K means that there are 1500 carbon filaments
per bundle.
The weave is made up of a number of bundles
and there are 1500 per bundle.
It's called a tow in the carbon world,
but basically we'll think of it as a bundle.
And each one is a filament.
So there are 1500 filaments per bundle in the 1.5K weave.
Now, what Victory normally uses is 3K weave.
That's obviously 3000 fibers per bundle.
And that's a little bit heavier.
So this is a lighter arrow, but it is stronger.
That 1.5K weave is super strong, super light.
So what we're looking at here with the Victory HLRs
is you're gonna have a 250 spine arrow
that's at 8.6 grains per inch.
300, which I have here, 8.1 grains per inch.
If you know, 300 is probably one of the most popular spines
for arrows for folks shooting 70 pounds.
8.1 grains per inch, that's pretty darn light.
Then when you go to 350, you're gonna have 7.4.
At 400, you're gonna be seven grains per inch
and 500, 6.6 grains per inch.
So super light arrows that you're gonna have there.
Now, why would you do that?
Well, there are two basic purposes
for having an ultralight arrow like that.
And one is to just shoot a super light arrow.
You know, these right here as built,
I have this arrow at 411 grains is what this arrow weighs.
That's pretty light.
I'm used to shooting a 300 spine arrow
that's like in the 460 range.
This one's 411.
I got 315 feet per second out of my Lift-X with this,
which is screaming fast.
My normal hunting arrows shoot about 305.
So that's one reason.
Another reason for it,
and we'll talk about the shock collar as we get into that.
So these are gonna come standard
with a 50 grain shock collar, Victory calls it.
And you can see that it is an insert,
but watch this end right here.
So the end is going to just go over
the very end of the carbon.
It's gonna sort of come over the edge.
It covers a very small amount.
Just my point is it's not flush with the carbon.
It actually comes over top.
So that's gonna protect that carbon end.
And on the inside here, you're gonna see this is threaded.
So this insert itself is 50 grains threaded on the inside.
So you can use some of those Victory weights
to screw it on there.
As I mentioned, another reason for the ultra light arrow
is so that you can better place your FOC.
That's the amount of weight that you're gonna have
at the front end of the arrow.
When the arrow is super light,
you can really fine tune that FOC better
than when the whole arrow is heavy anyway.
So you can concentrate your weight
at the front end of this arrow.
If you like to have a high FOC, 18, 19%,
if you're getting into that range,
you can do that easier with an ultra light arrow.
So that's the other reason why Victory wanted to go
with a super light arrow like this.
You know, fixed blade broadhead,
you wanna get that FOC high for accuracy.
You wanna get your overall arrow weight up,
but you want it concentrated at the front end.
That's how you're gonna do it.
This arrow is gonna be perfect for that.
Now, one of the things that Victory is advertising
with this arrow is the tolerances.
So they're saying that within a pack,
that these arrows are gonna be weighted,
weight sorted to within a half a grain of each other.
So we figured, hey, let's check it out
and let's see what we got here.
So I just pulled a couple out here
and I will weigh them for you, weigh these shafts.
So these are 32 inch.
There's nothing, no insert, just the knock on there.
32 inch, basically bare shafts.
This one here is 260.8 grains.
My next one, oh, it's properly.
260.8 grains on the nose.
Let's do another one.
260.6, oh, no, it just shifted.
260.8 grains, there's three of them.
It was at 260.6, but it finished at 260.8.
260.4 grains, there's four of them out of the pack.
But remember, they were saying within a half grain.
So there was four of them that I did.
Three of them were identical.
One was, what, 0.4 grains off.
So within that half grain tolerance is what they're saying.
And then I just wanted to check built arrows.
So obviously these have tack veins
and I've got 100 grain points on there.
So does that carry over to a finished arrow?
I've got 410.2 grains.
Remember I said 411, 410.2, close enough.
This one is 410.2 grains, exactly the same.
And this one is 410.6 grains.
So again, just 0.4 off.
And one of the things with the 1.5K weave,
another aspect of that that Victory is talking about
is that it has a faster recovery time.
So when these arrows come out of the bow,
they are gonna flex.
How fast they come back to straight
helps with your trajectory.
Obviously, if this arrow,
the longer it is flexing as it's in flight,
that's the more, quote unquote, unstable it is in flight.
So the faster that it can recover
and just be flying straight,
that's gonna help you with your trajectory.
And so these things, again, HLR, Hunt Long Range,
that's part of Victory's features
where they're saying these things recover faster.
So you're gonna get that flatter trajectory.
Obviously, that's better for long range accuracy.
The flatter it shoots,
the easier it is to group those arrows.
I'll say the more your arrow arcs,
man, the more precise you have to be
with aiming at long range.
Flatter it is, you can make little mistakes
and still keep those arrows grouping together
because their trajectory is flatter.
And so with this 1.5K carbon weave,
it does have that classic coating on the outside.
These Victory arrows,
we always talk about how they're gonna perform.
Well, for me, one of the biggest things
that I notice about arrows too
is how easy are they to pull out of targets.
We start getting these smaller and smaller diameter,
they sink more into a 3D target.
Sometimes they can be a pain to pull out.
Well, this nice smooth coating on these Victory arrows,
they've got one of the best coatings,
I think, in the industry.
Man, they just pull out of the targets nice.
We're in the middle of winter now.
I've been shooting these outside.
That's typically the most difficult time.
I haven't had to use an arrow puller.
I've been able to just pull them with my hand.
And in shooting these outside,
I was just playing with them to see,
you know, how they performed with me behind the bow.
And they definitely do shoot great.
I definitely noticed that flatter trajectory.
Just great, you know, flat shooting arrows.
If that's what you're looking for,
if you're looking for being able to really focus
on your FOC at the front end of the arrow,
you can do that as well.
Just a great high performing arrow
from the folks at Victory.
You know, that's what they do.
And they do it as good as anybody.
So now what I have here is the Victory HLR.
It says V1 on it.
So Victory, what they have is they'll have a V1,
which is their Elite Series.
They'll have a V3, which is their Gamer Series.
And then the V6, which is their Sport Series.
And what that refers to is the straightness tolerance.
V1 is gonna be 0.001 straightness tolerance,
V3, 0.003, V6, 0.006.
So that's the differences there.
And obviously the V1s, you know,
they're gonna be the most expensive.
You're gonna get less expensive as you go down
because the straightness tolerances
are not quite as tight as they are with the Elite Series.
One thing that is standard, you know,
across Victory's arrows that they carry over
with the HLR series is right here.
They are spine aligned.
And what that means is Victory identifies for you
the high spine, what we call the stiffest spine.
And when shooting from a compound bow,
you want that facing up.
So you can see how I have this arrow configured.
I have one vein up, two down, my knock in this orientation.
So when I clip this on my string,
this vein is facing straight up.
That corresponds with the spine alignment.
That's how you wanna shoot that from a compound bow.
Victory identifies that for you on each shaft.
So if you wanna see the Victory HLR arrows on our website,
the different ones we have to offer,
these are bare shafts.
We also have fletched.
These are my fletchings.
They don't come with the tack veins on there.
But if you wanna see the fletched versions
or the bare shafts,
be sure to click the link in the description below.
If you liked this video, give us thumbs up.
If you wanna see more videos like it,
subscribe to our YouTube channel.
Don't forget to click that bell to get notifications
whenever we put out new videos.
As always, if you have any questions,
you can visit us at LancasterArchery.com.
Thank you.
