Easy Steps To a Fade: Learn In 9 Minutes

Hair Models for Men
14 followers
10 Video Views·Apr 27, 2026
EASY Steps to a Fade: Learn in 9 Minutes
First step on his haircut is I'm gonna hit it four guards. Babel is closed. Whenever you do this step
make sure you're cross cutting. So cut it down the middle go across the other side and back on
the other side. This will help make sure you get an even cut all around. Now I'm going in with my
FX1 trimmers graphite 2.0 blade. I want to start at the corner of his line up
and work my way across his head. This step you want to do as quick as possible. You don't want to
take too long doing this. So it's important to have really sharp clippers or blades.
Now I'm gonna come in with my Babelist FX shavers. Start at the bottom for some pressure. When you
come up to the line make sure you flick out. Don't go all the way to the line but get close to it and
make sure you flick out. Now I'm going with my Babelist Pro FX1 clippers. Lever open and go up
about an inch making sure I cut it evenly. Don't leave any dark spots. Next I'm going with my one
guard lever open again making sure I go up about the same width as my first guideline.
So about an inch inch and a half depending how stretched out you want the fade to be.
Before I start to take out those guidelines I like to line my client up. This will help me
keep areas of the fade dark and also prevent me from pushing them back. It's super important to
keep your guidelines clean and even. This will help you get that nice blurry fade. So make sure
you don't got no extra hair there. Brush it out make sure those lines are parallel to each other.
I'm going to tap this line up just a little bit make sure I hit that
shaving area so I don't leave any type of line whenever I fade this line out.
Now since this is a high fade I'm going to take out this guideline
first. I'm going to start with the corner of my blade and the corner of his line up
and slowly flick that line up and slowly open that lever notch by notch. Do not rush this
process. This part is the most important part of the fade and will help it blend in
seamlessly from skin to the top of the hair. So take your time. Now my next tip
is blending in this top line. For some reason I like to fade I call it in the middle so I'll
fade the first guideline out and then the top one and sort of meet in the middle.
So this is a three guard I started open and now it's closed kind of hitting that area. Don't take
too long doing this because you're just going to go over it again with your number two guard.
Now I got the two guard on open tapping that line with the corner of my blade close
do it again. See I'm not rushing it but I'm not trying to go over it too many times because I'm
not trying to waste a lot of time trying to take that line out. Next step is my one and a half
guard open. Now this should blend in that top to the one blade I had closed. Like I said don't
take too long doing this but don't rush it either. As you can see it's already blending in. Now I'm
coming back in with my one guard on clippers closed and tapping that line about half an inch
up. Like I said you want to use half the blade or at least the corner of the blade. You don't
want to use your full blade and always clean your canvas. Make sure you got no extra hairs there.
Now I got my half guard on my 0.5 open. Same thing starting at the at the line out working
my way to the back of the head using half at the corner. Now this is where you really want to take
your time. This is where the fade comes together. Don't rush this part at all either. Now go halfway
corner of the blade. So another thing I like about these clippers is you can hear the hair being cut.
It makes that cool little noise. I don't know if some of you guys
clippers does that but these do straight out the box. I love them right now. I'm not gonna lie.
Coming in clean. Look at that fade. Just see that. I still gotta detail it but it looks good already.
Look at that. Now I'm gonna give you guys a little secret of mine on how to get a nice crisp line up
and also how to make the enhancements stay on a lot longer. So I'm using a cotton pad
with 90% alcohol. Do not use your neck strip. I don't know why but the neck strip did not work.
So use a cotton pad or a cotton ball for this and you'll see you're taking off all the dirt and oil
and when you do this it helps the color enhancement stay on a lot longer and also
give you a nice sharp line up. So before adding the color make sure the alcohol is dry and since
you got to high fade we're only getting the corner of the card so it blends in and looks natural.
You don't want to put too much. You want it to look real and like I said so we did the alcohol
this is going to stay on a lot longer than you would just bring it on. Same thing with this area
as you can tell he has a receding hairline right here and he likes it when I blend it in.
Make sure you comb those hairs and another good trick is you want to spray the card not the
hairline. This will give it that fade in look. There's some good gems because I noticed a lot
of barbers just are heavy with the paint. I mean some clients like that my clients don't
and neither do my viewers. So it's already looking good and I still got a detail to fade.
Check that out. Now I got my half guard on taking out some of these dark spots that I see.
Close the lever halfway using the corner of my blade. Yeah I'm really really feeling these
clippers right now. They're so clean. Now look at that fade. Blurry fade because it looks natural.
I still got to hit it with the with the razor. So now my next step is coming in with the razor.
I always go with the grain first then I go against it to get a cleaner look. One thing I like about
using rubbing alcohol on the line up is that it leaves a natural white ash line and that's
because the alcohol is actually drying up the skin. That's why some people don't like doing that
but honestly it's not that bad. There you go clean high fade.
