TAPER FADE CLASSIC BRUSH BACK TUTORIAL

Hair Models for Men
14 followers
#FadedCulture #TaperFade #BarberTutorial
Learn how to do a clean Taper Fade with a Classic Brush Back haircut. In this step by step barber tutorial, I’ll break down every step so you can master this timeless look.
Join this channel to get access to perks:
/ @fadedculture
Shop Faded Culture store- https://fadedculture.com
Join our online community, interact with us and elevate your skills- https://www.skool.com/the-family-7944...
Faded Culture E Book- https://fadedculture.com/collections/...
Become a Texas licensed barber, join our Academy- https://fadedcultureacademy.com
Use code Fadedculture15 and get 15% off any tools at https://www.wahlpro.com
How to do a perfect taper fade with a brush back
If you're interested in trying this haircut bust out your notepad get yourself a pen take some notes
And let me know if you give it a try
Today i'll be doing this tutorial on my busted brother as you can see he came in looking scruffy
So I hope y'all like it. My name is sergio barron. This is faded culture and enjoy this tutorial
Now I did go over the steps on how to do this sheer work
On our school mentorship. So if y'all are interested
in seeing the full tutorial then
Check the link in the description as I show y'all how to do this full sheer work
but
in a nutshell
All I did was section off the top
From the side using a delta section
Trim the sides using diagonal back sections and then just trim the top to match that
Again guys this video was requested from somebody in our online mentorship. So
I wanted to give them the benefit of having the full tutorial
but
Nevertheless, I still show y'all step by step how I taper into this style of haircut
Now before doing my clipper work
Make sure that you dry off the hair really well so that
You're not cutting on wet hair
It's gonna just make your clipper work more difficult. So
I don't tend to blow dry the hair completely 100%
I really just blow dry the sides or exactly where I will do my clipper work just to facilitate my clipper work
I'm gonna go ahead and set in to set in my first guideline with my trimmer
second guideline lever open
Making sure that it's running parallel to that previous trimmer line
Now every time every time I set in a guide guys
Keep in mind that i'm thinking that i'm fading as well so that I can leave my guides as soft as possible
Here I threw on the 1.5. I mean the one guard lever open
And i'm flaring out again being soft with it
So that it's not hard to come and blend out these guidelines later
Next with the 1.5 doing the exact same thing. But this time i'm trying to connect already to the top length
So i'm being real soft and pushing the point of my guard outwards flaring it out
So that I can try to connect as much as possible to my top length
now anything after that
I just clipper over comb grabbing the exterior of any bulk that's sticking out towards my fade just to clean it off
So remember guys as you're setting in your guidelines
Think that you're setting them in but also trying to fade them out if that makes sense
So as i'm setting them in i'm not trying to
Create them so perfect. I'm also thinking that i'm blending them at the same time
That way you have that or build that habit of leaving soft guides
Now to start blending out that top guideline that you see me point at right here
I'm gonna use the half clip lever at three fourths and using the corners trying to soften up that guide
You'll see that it takes some time to blend out
It doesn't come out right away and I like to do it that way so that I can gradually blend it out
I don't want to use a guard or lever position
That's going to take it out right away because that's how you can accidentally just create another line
So just applying a little bit of pressure using the corners and tilting the clipper inwards would help me soften up
That line as much as I can
Then whatever that guard didn't take out i'll come back in with the one
Guard lever still at that three fourths position to finish blending out
Whatever was left on that guide
Remember just be soft with it take your time and your challenge is to not create another guide
Now for the initial guideline i'm gonna go ahead and start with the clipper lever closed
Again being soft with it
So I can just blend out the initial start of it
Then open the lever three fourths move up a tad bit higher and continue blending that line
Next go ahead and open it all the way and finish blending out that line
Now if for whatever reason you feel like you're just pushing a line up higher and higher
That should be a note to self that you're being a little too harsh with it
Or something needs to change and how you're fading out your guides
So just keep practicing and then just repeat the process on the back side until that whole back taper is complete
I like to break it down
Since this last line takes me three lever positions to blend out
You notice how I break it down into smaller sections so that I focus on small areas at a time and it doesn't get so
much overwhelming
so
Uh, that's preference
So I mean if you want to do it that way you can if you want to just fade all the way across you can as well
Try them both and see what works for you
But once you're done, just go ahead and blend out
Or take out the rest of the bottom of the hair with your trimmer before coming in with the electric shaver to get it
All the way down to the skin
And I am using nothing but wall tools guys
Y'all go ahead and use faded culture 15 at wallpro.com and save 15 on all y'all's tools
But then after that remember how we use clipper over comb to get rid of all that bulk sometimes when you do that
You'll still have like this heavy weight line
And that's when you can come in with your thinning shears to soften up that weight line and help that transition look a lot more smoother
Now once you're done with the back go ahead and start off with the side tapers
Again, starting with the trimmers being soft with it
To lay down our first guide
Even when i'm setting in my guides I tend to use only the corner of the clipper
I never it's rare that i'll lay down the whole clipper on the head to lay down guides or blend them out
So just kind of keep that in mind. It helps me work in a more detailed fashion
And i'm using the exact same step guys open the lever
all the way
To set in my next guideline just coming up about a quarter to a half inch
The more you compress your guides the more of a compressed fade you'll have for me. I try to keep them about
a
Half inch for me that seems to be the sweet spot on how I like my fades to look so
With time you'll you'll get to realize how wide you like your fades to look or how wide you need to set them in
Uh to achieve the fade that you exactly want
Next doing the exact same thing with the one guard lever fully open
Again, trying to be soft with it and flaring out
As you exit with the trim with the clipper
Next with the 1.5 being even softer
By the time I get to the 1.5. I tend to use a lot of the hump of the guard to help me point the
tip of the guard outwards
to leave a soft guide
Now I know on this side and that sometimes that's going to happen where you barely see your guidelines guys
And that should be a good indicator that you're leaving soft guides
um
But now with time you'll start understanding
Where you need to soften up
or how you need the or want the fade to look so
That's why I always say use a picture reference to understand how you want the fade to look and you can visually step back and see
Does that area need the work right here or need more blending or not? Ultimately you're going to be the judge
Uh, every barber is always going to see something different. Nobody has the same vision
so
As long as you have
a step-by-step system to follow
you'll always have something to uh
Work off of and you're not that way. You're not winging it during the process
But by all means if you feel like this guideline is blended out enough
And you didn't need to use those guards to blend out that second guideline then then don't do it, you know
You'll be fine with just moving past it. But if you feel like you do you have those steps there
to follow
So again, the top guideline was taken out with that half clip and then the one the one guard lever at three fourths
Both guards lever at three fourths to soften up that top guide
And then the first guideline we take it out with the clipper lever closed
Then lever at three fourths and then fully open moving up a little bit at a time to blend it out
Then once you're done go ahead and just take out the rest of the bottom with the trimmer and follow it up again with
the shaver
to get that fade
To blend down all the way to the skin now this trimmer, I mean the shaver sometimes people tend to use or leave
Uh hard lines into the fade again
If that happens just come back in with your trimmer and try to soften them up
but for that same reason what you want to do is use the
Shavers as they were a pair of clippers use the corners of them as you get closer to the fade
So that you can soften up the pressure as well
And uh that way you're not creating any hard lines
You have to learn how to flare out and use the electric shavers as they were a pair of clippers
So that you're not creating hard lines
Then again, just come back in with your thinning shears
If you feel like there's a heavy weight line to soften up the transition from the fade to the top length
Then just repeat on the other side to finish off our taper
And if y'all need or feel like y'all need more guidance guys, whether it be personal development financial skills
marketing skills or just more
Help with your actual fade work and technical skill go ahead and join our online mentorship program
It's a community of a lot of barbers that are like you trying to learn and elevate their game
um
There you can upload your work. We can critique it tell you where we feel you need a little bit more work on
And just basically help you along your journey as and in becoming a barber
The link is in the description so y'all can go ahead and check it out. It's a seven day free trial
Check out the platform see what it's about and then just make your decision if you'd like to join us
And these are our very own faded culture shear set guys very high quality
So if y'all are interested in them, go ahead and visit fadedculture.com and get yourself a pair
Then once you're done with your fade work, go ahead and follow it up with the trimmer work
This is this is the part where I start basically detailing and being really or trying to perfect
The haircut as much as possible
So I take my time and try to get my lines to look as sharp as possible
So learning how to keep a balance of not pushing your lineups too far in
But not leaving them too natural so that you have a clean line
Uh is a challenge so you just got to learn
Where to find your sweet spot not be scared in the beginning
You might be scared to push these lineups too far back
But sometimes you may need to push them a little bit back so that you can understand how far you can get away with
Before it's too much if that makes sense
so if you're scared basically just
Maybe let somebody that you uh more confident with that. You can practice stuff like that on
uh, maybe don't do it on on strangers, but
If you have a brother, uh
A daughter, I mean a daughter a son or somebody that you could practice on
uh
Go ahead and practice on them first before you actually practice on strangers
Then i'm gonna go ahead and use our shave gel which you can find again
at betaculture.com
And use our very own straight razors
Right here. I am going to use the slide razor
to perform my uh straight shave
So apply the shave gel. I always apply shave gel on everything
That I use my trimmer on just to get my lines as crispy as possible
And I first start by tugging on the skin to help me create that tension and help that razor slide a lot more with ease
And first i'll start from the line and shave downward
This is where i'll shave off most of the shave gel
Most of the hair and most of the peach fuzz out of the way
And then i'll come back and reverse shave just to get that line to look as sharp as possible
And basically to help that shave last a lot longer
So here's where i'm back or reverse hand shaving
Up into the line now these razors are really sharp. So it's up to you to stop exactly
Where you left off with your trimmers if you use too much force, you'll push past your lines and you'll just mess up your lineup
so it's up to you to practice and uh
Really just stop exactly where you left off with your trimmers
And if you're still not confident yet with the straight razor, I encourage you to use it without an actual razor loaded
That way you can get more or build more confidence moving around people's heads
um
Before you actually slide a razor on it
So always anchor yourself to somewhere on their head. You see how i'm always placing my opposite hand behind
the back of the razor blade
I never have my hand in front of the razor because you can accidentally cut yourself
So that's how you create the tension by putting the your hand your opposite hand on the back end of the razor
Now I am going to use our very own adjustable enhancement card
This part is optional
But I always like to apply a little bit of enhancements to my lineup just to help that lineup look a lot sharper
Especially for pictures and marketing purposes
Uh, I try to do it to where it just looks as natural as possible
Then i'm gonna go ahead and start styling the hair. I like to apply the product wet in this style
I think it looks a lot nicer
Uh, but I am using our faded culture matte clay
I wet the hair first
I get about a dime size of product into my hand emulsify it by rubbing it really well into my hands
And then I apply it
And then once you have a desired style, you can just apply a little bit of hairspray just to lock in the style all day
And you can just tell right here. He's already starting to feel himself
Nah, but here's the before guys
And then here's the after I hope y'all enjoyed this tutorial and y'all were able to learn something from it
If y'all did let me know down in the comments
Again, guys, feel free to join our online mentorship
um
We got a lot to offer on there and we're here to help
But with that being said, my name is sergio barron
This is faded culture and i'm gonna catch y'all on the next video and don't forget to subscribe
Let me know in the comments what other video y'all like to see on this channel
And uh now we'll catch on the next video. Peace
