https://www.youtube.com/user/VideoJoeShows How to locate a plastic electrical cutin box for an AC wall time is easy...when you know how. VideoJoe is just in the process of determining the location for where he wants to cut a hole in a wall for a cutin box for an AC wall timer. Whew...sounds complicated. Not really. Has VideoJoe ever installed a cutin box for an AC wall timer? Not before this one! That's why he wants you to see that if an average Joe can do it so can you. A project like this is all in the process. Step by step you too can do this project. Watch & learn as VideoJoeShows you how he goes about the process of determining the location of the cutin plastic junction box (and what an actual plastic cutin box looks like) for the new wiring which will go behind the new wall timer he will be installing. https://www.youtube.com/user/VideoJoeShows
Because if I can do it, you can do it. Now have I ever installed one of these timers before?
You know what? I have never installed a timer like this in my life. But I know I can do it.
Never, and I mean never, work on an electrical outlet or a circuit that has power on it. Don't
even think, oh I'll be careful. I know how to do it. I've seen an electrician do that.
You know what? Professional electricians probably could do this hot. And they have in such a way
that they'll do it. But I never like to do that. And I don't encourage you to do anything like
that either. Here's my cut-in box I'm going to use. Put that timer location in there. I'm not
ready to do that just yet. But I'm just showing it to you. And at the store, I went and bought two
of these. Because I'm not quite sure how I'm going to be able to fish my wire into this box just yet.
Depending where the stud layout is. I might want that right in here. But I'm hoping the next stud
is way over here. Because if you will remember, this plug is way far in the corner. Okay? So I
want to get this over as far over to this stud as I can. So when somebody walks up to this air
conditioner, they can reach over here and turn the timer here instead of walk way over here in case
there's a chair in the corner or whatever. So before you start cutting your cut-in box in
willy-nilly, let's figure out where the studs are first. That will determine where we install that
timer. Does that make sense?