How to Determine the Size of Romex Wire for Your Project

VideoJoeShows
86 followers
15 Video Views·Apr 22, 2026
https://www.youtube.com/user/VideoJoeShows
What size electrical romex wire should I use for my project? Is that your question? VideoJoe is in the process of installing a new AC wall timer & he has that question too! He knows what the answer is & he wants to show you how he figures out what size romex wire to use. There is a formula to use in order to figure out what size wire you will need for your project. Check it out as VideoJoeShows you how to tell what size romex wire you will need for your electrical project.
https://www.youtube.com/user/VideoJoeShows
Now let's think about this for a moment before we drill our hole,
right? What you got to use is 12-2 with ground, 12 gauge wire, and here's my little piece. I'm
going to do this whole project with this. I just happen to have this piece of wire. I didn't have
to go to the store and buy a whole roll or anything like that. It's definitely at the
store. You can get 12-2 in maybe 15 foot roll, 25 foot roll, and they'll even cut it for you
if you ask, and then they charge it by the foot. So any way you can do it, okay? So 12 gauge is
for 20 amp, and that's what I have. Remember, I don't want to use 14 gauge wire because that's
too small, okay? So the higher the number, the bigger the wire. 12 gauge wire is fairly stout
wire. 10 gauge is even thicker. 14 gauge is thinner, okay? 14 gauge is for 15 amp circuits.
This is a 20 amp circuit breaker, and I know I've got 12 gauge wire. I'm looking at this wire over
here, and I'm not sure what they ran. You know, it almost looks like they ran 15 gauge wire or 14
gauge wire. I don't know why they did that. They've got it on a 20 amp breaker, but this is
existing. I can't do anything about that, so I'd rather be safe than sorry. So there's
the theory. 12 gauge wire, 20 amp breaker. 14 gauge wire, 15 amp breaker, okay? We've got a 20 amp
breaker, so I'm going to use this 12-2 with ground. This is cable sheathed wire, so we're
going to strip that off. There's three wires in there, a black wire, a ground wire, which is
copper wire, and a white wire, okay? But we've got to think about this before we drill the hole.
