MATHEWS TRX 34 BOW BUILD

Exploring Ancient Crossbows
3 followers
May 1, 2026
MATHEWS TRX 34 BOW BUILD
Comments are disabled for this video.
All right, everyone, welcome to today's video.
We are building a bow today and a bow that I've been looking forward to getting for quite
some time.
And that is the Matthews TRX 34.
There's actually been quite a bit of buzz around this bow.
It's not a new, you know, the TRX line is a target line.
It's been around for three or four years now and they just keep adding to it.
And this bow is the shortest axle-to-axle bow on that line, of course, 34 inches.
But the riser is actually pretty small compared to like the V3 31.
So it's going to have a very interesting feel to it.
It's kind of like a hybrid bow between like target and hunting.
I know a lot of guys I've talked to are going to try to hunt with this bow.
So I'm going to set it up as a hunting bow, I think, at the start and then see what just
what type of scores I can get out of it and just kind of roll from there and see.
It's kind of like my tinkering bow, I feel, like shooting in the backyard might take it
to a total archery, might not, I don't know.
But what we're going to do, we're going to set it up.
We have Be Real Shrewd Stabilizers.
We have Matthews, what is this, I just had a brain fart, UltraRest Integrate Rest that
mounts onto the new TRX plate system.
We got a UV3 in the hunting kit, got a Be Real grip.
I don't know why this hinge is there because we're not doing anything different with that.
We have a Shrewd Matthews Series Adjustable Mount, Scope Barrel, and we have an Accel
AccuTouch that we're going to throw this UV3 on.
So let's dive right in.
This is going to be more of, not an educational video, but rather than we're going to set
this bow up, test it, and shoot it.
So let's dive right in.
All right, well we have all the basic accessories, we just bolted them on, there's really nothing
fancy on that.
But we're going to set up, there's a little bit to setting up the UV3 scope, and I haven't
done it too many times on video, so I figured I'd just kind of walk through doing that.
I've been getting a lot of questions about it lately, set up and everything.
So this is the UltraView 3 hunting kit.
You buy it as a target kit or a hunting kit, or if you already have the target kit or already
have the hunting kit, you can just buy the different cartridges and swap it out.
But what, in here we have a, I think it's a 20 thousandths, 20 thousandths up pin.
And you just turn it on, turn it up, turn it down.
So I won't go over all the functionality, I'll just go over the basic setup.
What you need is the correct Allen wrenches for it.
So there's these little set screws in the side, you have to take off the front cartridge,
and then it opens up that circle right there.
If you have any sort of Excel site, you use this long one, you take the nut off the end,
you feed it through that long one, and this is all if you're a righty.
If you're a lefty, you just do the complete opposite, and you actually have to swap the
shades, the cartridges.
Okay, so now that that's in, you just put the, let's wait on that.
Because we want to make sure everything's tightened down.
So you have that threaded through, take your rod, put it in, you put it in with the square
touching the scope, not the hexagon.
Then we take our nut, you can get everything hand tightened pretty easily, but I'll take
a set of pliers and a little wrench, or I actually do an Allen wrench.
Got to find the right one, it's a 1 1⁄8 Allen wrench, you've got to remember what
one's what, but I don't.
Tighten that down, that's going nowhere, so there you have it.
That's attached, super easy.
Put the lens cartridge back in, snug your set screw back down, and then I don't know
if this is loose, it is.
So then all you do is slip it right in, and we're going to eyeball it, because there ain't
no telling where we're going to end up.
Well, I'm going to have to use 5,000 different Allen wrenches to get this together.
There we go.
Okay, so I'm just going to eyeball it, I'm going to tighten it down for now.
Okay, so we have it at square one, now what we're going to do is we're going to take our
third axis, got this BrightSight third axis thing, it works really good.
You can do the whole pull back and on the strings and everything, but I don't know,
I just found that this gets you so close that you almost just double check it with the drawing
back method and everything, and most of the time this is right on.
But I do have the draw back method also.
So all you do is feed this in, tighten everything down, take that back out, and how this works
is you just get all of these levels on the BrightSight, it's too top heavy, you get all
these levels correct, then you get your second axis right, which, oh, it's right on, nice.
And then what you do is you spin it at a 45 degree up or a 45 degree down, it does not
matter, to get your third axis, and that is a little off.
So now what we'll do is we'll grab our Allen wrench, find our third axis adjustment, which
is right here, and you just line it up with the BrightSight level.
So there you go.
So that's lined up with the BrightSight bubble, gonna snudge it down, double check, and we're good.
Double check our second, we're good.
If you know what you're doing and you're familiar with it, it's super fast to do, but definitely
take your time if it's your first time.
Okay, I'm gonna snug down the barrel, I feel like that screw is definitely stripped, 100%.
Nice, most of my screws are stripped, but this sight is like, I think this one's like
four years old.
Alright, so we have that, all of our thousands of Allen wrenches, gonna put this on the bow,
nothing special about this, and starting out, like, you can do all sorts of adjustments
and all sorts of tuning things, but I'll just run it right in the middle, and if I mess
around with it later, I'll change it.
All the hardware is on the bow, looks kinda weird with hunting stuff on a TRX-34, but
now we're gonna put on a D-loop, put on our peat, get it all square, shoot it through
paper once, and then we'll go outside and shoot, I won't really talk through that whole
process too much, but I'm really excited to see how this thing shoots, because there's
no different, I'm doing nothing different setting up the bow compared to anything else.
But, it's off to a good start.
I unbox these videos in the, I don't know if we're gonna do this video, oh yeah, we'll
do this video afterwards for sure, I unbox these and my first reactions on these strings
were kinda like, eh, because the yellow compared to the stabilizer yellow is a little off from
my string color yellow, but I don't know, it might grow on me a little bit, we'll see,
let me know, what do you think in the comments below, should we go back to neon, should we
go all black, or keep it as is, let me know.
Alright, well we have D-loop on, we're pretty much ready to go, I have my peep sight in
the string and I'm just gonna determine how I want the height of it, so we're just gonna
pull it back real quick and look, wow, great job Chris, that's like 2 inches off, do you
know why, because I was just shooting my 27 and it's such a short axle, the axle on
the 27 is way off, it's still way off, that feels pretty good though, okay, I can rock
and roll with that, but we are way, probably gonna have to twist this string up a little
bit and move the D-loop, because that's how we're rocking right now, just completely off,
that's why it's good, just let it free flow in here, do not shoot it like this, but you
can draw it back, look at all that string residue, you see all of it on the peep sight
and everything, the yellow, there's a lot of color dye in these colored strings, it's
crazy, alright everyone, we're pretty much ready, everything's on it, my peep sight is
still a little crooked, but you really can't fine tune that, wow, I'm gonna have to change
my locking rings, you really can't fine tune that until you shoot it at least 100 or 200
times to get the string set in, but we're just gonna get a rough paper tune out of it
real quick, are you kidding me, do you see that, wow, this is not fake, this is not fake,
we just took it off the bow press, let's make sure it wasn't, let's make sure it wasn't
a false or even a black hole, wow, in my entire life that has never happened, the only thing
I did is I did, I'd stock, this is 100% at zero for the QAD, this is 100% at zero left
and right, I didn't even line it up or anything and then all I did is put the arrow on and
level it 90 degrees, 100%, that's, I've never had that happen, to not even touch the rest,
let's go, one thing though is I have a 3, what is it, 3 16's peep, does that sound right,
what peep is it, it was a, yeah, 3 16's peep, it's a little big, I might actually just swap
it out right now with a target peep because this is kind of going to be a, like a target,
a target hunting hybrid, so I think I'm going to swap that out just to get a tighter housing,
right now I see a bunch of air around the housing, I don't really like that, so I'm
going to put a smaller one in, now we're going to be good to go, we're going to rip outside,
shoot some arrows out of it, so this bow, it feels good, it's a TRX, a small TRX, so
it's kind of violent, that's one thing I noticed right out the gate, it like jumped
out of my hand, so it's not like a hunting bow dead in the hand feel, it's more like,
it's a little more aggressive, it's more like a target, a target feel, but I don't, I can't
say too much about it, I'm going to put some arrows through it and then we'll kind of get
a better consensus about it if I don't karate chop my hand or string in half right now,
we'll be good.
Alright, we're going to shoot 20, going to get dialed, but I want to go back, at least
50 something, it's not very windy today, we did the truck challenge video today too, it's
a great shooting day, it's so windy in Iowa compared to other states, so we're taking
advantage of today, shooting a bunch, so we're going to back it up, 50, 60, 70, 80 maybe,
just see what type of groups we can get, see what type of feedback we can get with this
bow, I think it's going to be a shooter off of what we've done so far, but let's go find
out.
That was pretty quiet for a target bow.
Alright, so that was like 10, I wanted to make sure I didn't, I wasn't going to miss,
now we're at about 20.
I really think this bow is going to be a shooter.
Dude, that was barely any drop in there.
Yeah, dude.
This little thing right here is loose.
You always, when they come from factory, you've got to double check everything, you can just
listen, that little buzz.
So I'm going to go tighten that real quick.
This thing is a shooter.
I can just watch it go all the way in, it's a freaking bullet all the way.
I want to get, I want to get to at least 80 yards and see what we're dealing with here.
Nailed my left and right adjustments, and we got the boat out of the way, so we're just
going to scooch this target over a little bit, and scooch all the way back.
Alright, I'm excited to see what this thing, what type of groups we can get at 80.
I think it's going to be, I think it's going to be good.
I would hunt with this bow.
I texted Derek, I was Nelson for Matthews, I was like, dude, this thing's legit.
I would definitely shoot this for hunting.
And I would, but I probably won't.
Ooh, launched into the stratosphere, dude.
It is fast.
For a target, for a target designed bow, it is wickedly fast and quiet.
It's very quiet.
I don't know why, because there's nothing different about it.
I mean, realistically, it's probably spitting probably 300, 300 feet per second.
This is a 70, it says 70 pounds, but I feel like it's 72-ish.
They always run a little hot.
How far do you think this is?
55.
We'll shoot here a couple times and see what we get.
Peep is a little crooked.
I might want to take my glasses off.
So for those of you that don't know, I am kind of blind.
And I have these glasses, and I can see, like, perfect with them on.
But when I take them off, it takes me a second to adjust, and I can see okay.
But, like, right now down at the target, I cannot see where the arrows are.
And I put my glasses on, and I can see impact points.
And I feel like when I have my glasses on, my pin and stuff then becomes blurry.
So I don't know.
Something I've been messing around with lately is shooting with my glasses on and off.
And when you mess around with clarifiers, it actually jacks it up if you wear glasses, don't wear glasses,
because the lenses, like, clash with each other.
So if you decide to shoot with your glasses, you have to set everything up.
If you take them off and shoot, it's going to jack everything up.
So essentially, choose what you're going to shoot with and stick with it.
Anyways, that was totally off-topic.
I pulled one out.
Not awesome.
Like I said, I'm going to try to shoot without my glasses this time, see if that makes any difference.
But a little fine-tuning.
I might grab a couple weights too, or a couple weights, since it is a target bow.
Target bows are, since they have longer actual axles, they do like a little more weight, a little longer stabilizers.
And that's, I guess, one difference between a hunting bow and a target bow.
A hunting bow is so dead in the hand when you shoot it and really doesn't require a ton of weight and a ton of stabilizers.
But a target bow, I feel like they want more weight and more stabilizers.
But we're going to grab some more weights.
I'm going to see what that feels like.
Let's see here.
Half ounce.
Let's grab three, if that's even enough.
Maybe grab a bolt in case we need it.
That feels better.
Let's see how those couple little changes, if they affect anything.
No glasses this time.
I like to get, I'm shooting four arrows at 55 yards.
I ranged it.
I would like to get all four inside the ten ring.
That would be ideal.
Where'd that go? Did you see that?
I left.
Is your eye, is that good?
Yeah, I can see it.
Do you have contacts?
No.
That was in the middle, wasn't it?
Yeah.
Touch low?
Yeah.
That might have been me on that one.
A little low again.
That was me.
All right, let's go check these out.
I want to shoot a couple more.
See how good of a group we can get.
So far, this bow, after I added, that's a lot of weight.
One, two, three, four, five, six, seven, eight ounces off of a 12-inch front.
I only have five ounces off the back.
But it feels, the way this riser is, it almost, if anyone's shot a Traverse,
it almost feels like a Traverse.
It's kind of the vibes I'm getting out of it.
It does not feel like my 38, does not feel like my 40, 36, maybe a little bit.
But it definitely has a hunting bow vibe.
We'll see.
I can mess around with this a lot more.
All right, we're getting there.
This one up here was first.
Then I moved my sight, and I got a good group there.
So maybe I'll give it a little bit.
The goal is to get all four inside the 10-ring.
I think I can do it, especially with the setup.
But we're just still working out the kinks.
And don't change a whole lot if you get a brand-new bow within the first 100 arrows.
You got to break it in.
You got to break the strings in.
Stuff gets loose.
Stuff moves.
It's brand-new.
So don't move a whole lot in the first 100 arrows.
All right, well, I just shot a really good end.
It's the third end.
So I just was like, Mitch, let's do some B-rolling.
We'll probably take a couple until I get a really good end, but the freaking next one.
So let's go look at it.
I think I got all four 10s.
Really good group.
So let's see.
We shot four.
Another eight.
Eight arrows to sight in and then three ends at 55 yards to get to here.
I really think this bow, this is a perfect bow.
If you can only buy one bow, you only want one bow, but you might experiment with a little bit of target archery
and you hunt, this is a great bow for you, I feel.
It's compact enough to be a hunting bow, especially if you're an out west only guy.
Yeah, I don't know.
Really excited to mess around with this bow a little bit more, but Matthew's TRX 34, big plus for me.
It's a great in-between all-around bow.
And for me to freaking shoot nearly four Xs on the third end of me getting sighted in, that's pretty good.
And we got a bullet hole, literally first arrow.
That has never, ever happened before.
Well, everyone, thank you so much for watching this bow build, TRX 34.
Make sure to subscribe.
Leave a comment below and I will try to answer a few of them.
And check out brollmerch.com if you want to snag a hat.
We got a bunch more in stock now.
And we'll catch you guys in the next one.
