Easy Way to Locate Wall Studs

VideoJoeShows
86 followers
7 Video Views·Apr 22, 2026
https://www.youtube.com/user/VideoJoeShows
Here's an easy way to locate wall studs in an existing wall. Have you ever heard of a stud finder? Do you know how to use a stud finder? VideoJoe will be using a stud finder in order to locate a stud in an existing wall & he wants to show you too. It's not that hard to locate a stud in a wall but, on the other hand, it's pretty difficult to locate wall studs if you don't know how. Watch & learn as VideoJoeShows you how easy it can be to locate wall studs.
https://www.youtube.com/user/VidoJoeShows
Gotta locate these studs now. I'm going to use a stud finder here
and you put it up against the wall press the button on the side
and make sure this green light's on then then you push it along the wall
and did you see that you saw the red start coming up there see there's a red there you move it over
closer and then it goes up to green that means that's the edge of the stud going over that way
so that stud is right there if I'm sliding to the right like this and I hit the green
that means that's where the edge is because I'm I'm now finding a solid piece of of structure
in the wall that's what I'm hitting that edge see how the red light is there and then it goes
up to the top that's where the edge is okay so from there over this way is where those two studs
are okay now I got to slide it this way so I know I know that there okay so to recalibrate
it you take it off the wall press the button the green light's on start sliding it this way
here comes the red okay there's the green right there and I'm sliding it from the right to the
left so once I get to there that tells me that's where the edge of the stud is from there over to
the left so the stud is about right there okay and to check that I can put it over here calibrate
it come on over this way there's the red and see the green is hitting right there and check that
again there's about the edge of it right in there see that that's where the stud is I'm just going
to put just a little mark there I can I can wipe that off that's the center of the stud okay
