How to Demo Kitchen Tile Countertops Made Easy? Part 28

VideoJoeShows
86 followers
14 Video Views·Apr 23, 2026
How to demo kitchen tile countertops made easy Part 28 is what this DIY howto video is about. VideoJoe is getting ready to remove a garbage disposer so he can then remove a heavy cast iron sink. Watch & learn as VideoJoeShows you what VideoJoeKnows...how to demo kitchen tile countertops made easy Part 28. Nice!
You're just going to have to imagine you can see that that thread area up there
and
I'm gonna
I'm gonna take my I just got a beat-up old screwdriver and I use this for demoing and stuff
I don't use this for a screwdriver anymore. Somehow the tip of it broke years ago
I was gonna throw it away and I thought hey
I'll just use it to
To bang on stuff like this
I want to look at that and make sure
It's starting to twist
Ah, come on
me
See it's getting caught inside that hole. Maybe I can just do it right here and hit that
I'm gonna have to hit it a little bit stiff. There it goes there
Boy that thing is heavy
Let me tell you okay
Actually, I thought I had screws on
Threads. It's just got this little nib
like that see
And then when you're under here when you're installing it
You've you've got this, uh groove this edge
This edge here that's got a flange
It's got a flange on it. See
And you have to push it up tight and then as you're hitting it goes on the flange see it
Here's the flange right here in front of us
See how it goes up
There's three of them. So you got to line that up
You got to line that up just right
Hold your mouth just right hold it up there tight
And get it started and then as soon as you start it
You can kind of whack it with this with your hammer over here over here over here. However, you can do it to get it tight
See look at that
and and these screws
You don't have to do anything
That's that's for when you install this strainer
Thing to get it tight. There's a backing plate and once you put it on there you put your plumber's putty up on top
you know above in the sink
and then
You just put these screws in and as you're tightening the screws it sucks that down
It's pretty cool how that works and that's how this one over here worked, too
See this one. They didn't have well, they had these side screws. So they used a pair of pliers or or uh
You know crescent wrench and tightened up and it and it did the same thing. So that's how you install sink strainers
and garbage disposals
to the
sink base
Nice, okay. Am I ready to pull this out? No, not yet. I've got to undo those two
Nuts that one and that one, okay
Be careful with those hold on to it hard
and righty tighty lefty loosey
And they should unscrew
nice and fine
Now the other thing you could do is
unscrew
It up here
Okay, it's a little bit more tricky to do that
because
The copper pipe up here you have to hang on to the top of that with a pair of pliers
As you're tightening this bottom if you don't you twist that
Copper and you start twisting it and you can only get this so tight
You see what i'm saying and it would leak and then you're going to do damage because these copper tubes are not designed
to be
Twisted when you install that so i'm just going to loosen them here
This this pipe here is i'm just not even going to mess with that underneath the cabinet I could do that
I could do that later when the sink's out, right?
The main thing is just to get those two and then
Then I look around and i'm ready
to remove
the sink
from the top of here
Okay
One step at a time. I know you can do it
That's all you need
Spanner wrench or a crescent
Wrench, it's just a little baby one. I carry this in my nail bag
I use this all the time and then I have a way bigger one of these too when I need it
But for something like this, I don't need anything bigger
And if you don't have one of these what could you use you could use a pair of pliers
If you want it
Okay
Because we're only loosening up the one nut and it's attached right to the supply line
Valves and so I only I don't have to really hold that the supply line
Valve at all. I just get up there with this and unscrew it
And I should be fine
Oh, that's funny righty tighty lefty loosey. That's how that's how it usually is but because because these valves are facing up
You know if you hold on there depending what you think is right
And what is left?
You could want to try to tighten that thinking you're loosening it but just think of the threads on normal
faucets and stuff righty tighty lefty loosey and then and then imagine
This being up there
And and tightening down
Okay
See in effect. It's it's going to the right
uh tightening it
and
It just depends how you have your wrench
on there
As as opposed to which way is right which way is left if you know what I mean
Now i've got to look at this and see if I were to jerk the the thing out right now
This is this pipe here is the extension
For this here when you pull this out
See how it goes in and out like that
and
They put a weight on there see that that's just a way to help help you when you when you
When you pull this for it to go back down
So whenever you install one of those you have to make sure that this piece is going up and down
Easily enough and it's not hitting other any other pipes
Or fittings or your garbage disposal
pipe
or your air gap
Drain that's going from for your dishwasher and all that kind of stuff
You want to make sure there's enough room for that and that thing just gets screwed on
Generally, all right
This one might have little snaps on it
I've seen them with screws and it just kind of fits over that and you tighten that up when you get a sink
Faucet, you know
So I just have at first at first I thought oh brother i'm gonna have to i'm gonna have to disconnect this way up high
but no
I just pull that down like that. See so now all of this is attached to the sink, right?
I mean I could put some I could put some masking tape around that
So it doesn't get caught as i'm pulling it up last thing I want I would want is for for this
somehow to get wedged underneath that and for me to jerk the sink out and have it break this or
Something like that. Okay
All right. Look at that
I'm almost ready. I'm gonna put some i'm gonna get this tie this all together put some masking tape on there
Okay like that. In fact, I could hold that up there too
Like that if I want
And then i'm gonna put some masking tape over that
um, if I had some duct tape I could do duct tape masking tape will be fine and it's just to
Keep the sewer smell from coming into your house
If you don't do that after a while
And depending how long it's gonna be before you install another sink and all that kind of stuff
um
You're gonna you're gonna say hey, how come it smells?
In here. Well, it's because you didn't put something over
That hole because we've done away with the trap now, right?
The trap is what?
Hot is what fills with water and that water
Keeps your sewer line
A smell from coming into your house
Every
Sink has one
And even toilets have it if you look on the toilet, you'll see how the squiggly line goes around on the side of a toilet
That's because it's a built-in trap before it goes down the drain. So even when you undo
Toilets, you might think is there a trap underneath that generally? No, there's no trap underneath the house for that
So you got to fill that up with newspaper or something before you?
Replace the toilet and that kind of stuff too. Okay
Well that is
I'll be back to you in a minute
After I get everything ready to take that sink out
