How to Remove Compression Fitting Water Supply Line Gate Valve

VideoJoeShows
86 followers
64 Video Views·Apr 20, 2026
https://www.youtube.com/user/VideoJoeShows
How to remove a compression sleeve water supply line gate valve is what this howto video is about. VideoJoe is in need of replacing a compression supply gate valve & he wanted to show you how to do it. Watch & learn as VideoJoeShows you how to remove a compression sleeve water supply line gate valve.
https://www.youtube.com/user/VideoJoeShows
Our project today is I'm gonna have to remove those water gate valves. The one on the left I
broke the other day. It snapped right off in my hands. I had to go to the store, make a material
list, get the right parts, and now I'm back to replace these. And since I'm doing the hot water
line, which is the one off to the left, I thought I'd do the right one too because that one, as I
was trying to turn the water off, that started dripping and leaking all out of there too. And I
didn't want to mess with that anymore for fear that I was going to snap that off and have water
start coming all over the place. So I've already turned the water off. It's really important to
make sure that you got the water off to your house, your entire house, because you've got to
take these valves off. You don't want any pressure on these lines. I was all ready to show you how
to remove a water faucet, a bathroom faucet, but I can't do that now until I replace this. So I'll
do a video of that some other time. So you're in luck. You get to learn lots of things, let me tell you.
And you're going to watch me all along the way to see if I can't get this taken care of properly
and what I'm going to do if I run into any problems or anything like that. Because you know what,
if I can do it, you can do it. I'm looking at these lines. I've already checked,
made sure the water's off. I've got the faucet on right now. Nothing's coming out of it.
And I've got to take this, disconnect this line here. And there's a nut right there. So
I'm just going to loosen that up right there. And I've got to take that off.
Geez, that's all they're kind of tight too.
Wow, I might have to get some bigger pliers on the mat. That's the first thing I got to do is
loosen that up. And if you're questioning which way do you need to do that for fear that you know,
you don't know which way to turn this because you don't know which way is tight and which
way is loosened. So righty tighty, lefty loosey. I'm going to show you, this is the gate valve I'm
going to replace that with. Now it's way better too because you can just take the handle quarter
turn and that would be off and that's on. That's all you got to do. This other one was plastic
and you have to turn the handle and turn it and turn it and turn it. And you've got all
kinds of possibilities of it leaking and all that. So this is a quarter turn one way or another.
Nice, huh? This nut here is where that flexible pipe is going to go. And see they give you this,
now that nut, I'm not even going to use that. And there's a little coupling in there. I call
that a little ferrule. And that's in there. I'm not going to use that. But if you were putting
a hard pipe in there, something like that, you would put this on the end of the pipe and then
you would slip this on and then you would put this little ferrule over the pipe.
And then you would take that and screw that on there. Okay. They just come like that in
case you need that. Most of the time people don't use that. They use a different fitting.
And I've got some new extensions. I'm going to end up putting some new extensions on here.
And see it's got a three-eighths line and there's a little
compression deal inside there already. Okay. So I'm just going to put that on there and screw
that on. Let's see if I can't get it here for you. Like that. Okay. So that's, that's what goes
right there. This is where the, this is where the copper pipe fits in there. I'm showing you
this because it's hard to show you way up high there. See, it's got a ferrule inside. See that
one there? That goes over the pipe too. You slip that on, you slip this on first, put that over
the pipe and then you tighten that and push that on tight. And then you have to tighten this up
to keep it from spinning. You put a wrench on this, on this one here. So you can tighten that
up, you know, without the spinning around and to get it off. It's the same way. That's why I'm
showing you this. I've got to put a wrench on here and hang on to this right there. So I can grab
this and if it's on there real tight, if I'm not grabbing that, it's going to twist like that.
I'm going to have a tendency to snap that pipe off, you know, so it's kind of tricky. I got to get up in there
and get two wrenches on there and I'm hoping I can do it without causing any problems to that
copper pipe because the copper pipe looks a little old. I'm hoping it's still fine though.
Do you see what I mean there? That's the copper pipe right there. I've got to get this nut off,
so I've got to hang on to that while I'm trying to twist that. It's going to be, you know, I hope I
can get it. And that copper pipe looks a little suspect. I hope it's not all brittle and falling
and getting ready to fall apart. I would think if it was going to fall apart it would have done that
before and there would have been a leak there from before. But, you know, most of the time you
don't have a problem like that. Most of the time you can get these off.
