How to Install Compression Fitting Water Supply Line Gate Valve

VideoJoeShows
86 followers
48 Video Views·Apr 20, 2026
https://www.youtube.com/user/VideoJoeShows
How to install a new compression fitting water supply line gate valve is what this howto video is about. VideoJoe is getting ready to install a new compression fitting supply gate valve. He doesn't install these compression fitting supply line gate valves that often but if you can install one then that should mean you can install more...right? Installing a compression fitting supply line gate valve to a copper water line pipe is easy...when you know how. Watch & learn as VideoJoeShows you how to install a compression fitting water line supply valve to a copper waterline pipe.
https://www.youtube.com/user/VideoJoeShows
Here's something I wanted to tell you about hardware sales
people
And I talked to the guy there at the hardware store. Oh, yeah, you can you can get that off
You should be able to spin that off and just kind of pull on it and and move it around and you'll get it right off
It'll come
He's by the way was the person who didn't know about a ferrule puller
and
Sometimes you got to take sales sales people
With a grain of salt
Sometimes you get better salesmen who really know their their stuff and can really help you out
Then you get the odd salesperson, which I always seem to get
And they try to tell you something and they really don't know themselves
but you take them for their word if you don't know and
Maybe it doesn't work out like they claimed it was going to that's just one of them
That's just part of the process of doing things on your own
Every time you do a little project you learn more and you get better
I'm going to show you this is the gate valve. I'm going to replace that with
Now it's way better too because you can just take the handle
quarter turn
and that would be off and
That's on
That's all you got to do
This other one was plastic and you have to turn the handle and
Turn it and turn it and turn it and you've got all kinds of possibilities of it leaking and all that
So this is a quarter turn one way or another
Nice, huh?
This nut here is where that flexible pipe is going to go and see they give you this now that nut
I'm not even going to use that
There's and there's a little coupling in there. I call that a little ferrule
And that's in there. I'm not going to use that but if you were putting a hard pipe in there or something like that
You would put this on the end of the pipe and then you would put this
You would slip this on and then you would put this little ferrule over the pipe
And then you would take that and screw that on there. Okay, they just come like that in case you need that most of the time
People don't use that
They use a different
Fitting
And I've got some new extensions. I'm gonna put I'm gonna end up putting some new extensions on here
And see it's got a 3 8
line and there's a little
Compression deal inside there already. Okay, so I'm just gonna put that on there and screw that on
See if I can't get it here for you
Like that
Okay, so that's that's what goes right there
this is where the this is where the
Copper pipe fits in there. I'm showing you this because it's hard to show you way up high there
See, it's got a ferrule inside. See that one there that goes over the pipe, too
You slip that on you slip this on first put that over the pipe and then
You tighten that and push that on tight and then you have to tighten this up
To keep it from spinning you put a wrench on this on this one here
So you can tighten that up, you know without the spinning around and to get it off. It's the same way
That's why I'm showing you this got to put a wrench on here and hang on to this
Right there so I can grab this and if it's on there real tight if I'm not grabbing that it's gonna twist like that
You have a tendency to snap that pipe off
You know
So it's kind of tricky. I got to get up in there and
Get two wrenches on there
And I'm hoping I can do it without causing any problems to that copper pipe because the copper pipe
Looks a little old. I'm hoping it's still fine, though
Here's a tip for you, too
All about tips. Yes, indeedy
Let's say
Let's say you have that on there. Okay, and it's on it's on the pipe
You've got that tight
So tight that you would think it's never gonna leak you turn the water back on and it leaks
Last thing you want to do is try to turn this and tighten this
With water pressure on there. I did that once years ago. I thought I want no problem. I'll do that
Lucky for me. It was in a brand new house. It wasn't
No carpet yet still concrete sub floors
I went to crank down on that and I spun it a little bit and the whole thing
Popped right off water went all over the place. I got all wet turn the water off
Hey, you don't want to do that inside a house if that happens to drip
Shut your water off make sure you don't have any pressure on there water pressure and then tighten up the nut some more
Okay
If that's the only thing you remember about this whole segment
You've done yourself a favor
Are you learning anything so far? I hope you are. Is there anything I've showed you that you don't think you can do
Hope your answer is no
There's our Teflon tape
Think I have enough in this roll to do this. I've got some extra. I always carry extra with me by the way
In case I ever run out
Trick here is to put this on
in the right direction
You know, you got to think about it as
This is tightening up. You want the last bit of this to wrap over?
So it's going the same direction as you're tightening the nut
You know what I mean?
Just kind of have to
Hold it on there and kind of see
Okay, that's going the right direction. Do you see what I mean?
I'm going that way
When I tighten up the nut is it's going the same direction as the Teflon tape
This Teflon tape is going the same direction as the nut
Okay
Wanna be careful with this. I don't want to get any ridges in there if I can help it
I'm trying not to get it over that that edge either
You know because that's where
that's where that little sketch the
ferrule
Piece is gonna go. Okay, so I just spin that a few times
Spin it around a
couple
Three times or so and I'm kind of stretching it as I go before I wrap I kind of stretch it and wrap
Stretch it and wrap
Okay
That's probably enough
Pull that
And I see that's the same way as I'm tightening it. I know I went the right direction
And I've gone the other way
And I put the nut on I'd be loosening
The Teflon tape now doesn't even make sense to have the Teflon tape on there if you're not going to do it, right?
Okay
So now that's all ready to be put on just like that
