I couldn't believe my eyes when I got a message about a discarded mid century style dresser literally sitting roadside for garbage collection that day. While not every piece thrown out is worthy of or able to be salvaged, I decided to drive a half hour each way to go check this one out. Stinky, dirty, legless.
Four days of hot, sweaty work (summers in the valley of Nova Scotia are crazy humid and hot) later, I can't even believe it's the same piece. I'm thinking we are going to keep this one for ourselves to use in our living room.
I DID however discover a manufacturers error AT THE VERY END of not only the work, but editing this very video. I was crushed to realize they had put two handles on the wrong drawers, covered the mistake with toner, and because I simply took each handle off during the refinishing process and numbered them to go back on the same drawers, I didn't catch the error until it was pretty much too late. My friends Jim & Cindy from @FurnitureWarriors reminded me that mint error coins are often worth more. Maybe it's the same with furniture?? Hahaha! One can only hope! ___________________________________
Hello everybody, welcome to another video. I received a message from a good friend on
Facebook who tipped me off that there was a mid-century dresser at the end of someone's
road right in front of the dumpster. It was about a half hour drive and I was a little bit worried
it might not be there when I got there. I don't know why I was worried because it was pretty rough.
There's only so many people that are going to pick up something like this.
So the first thing I do whenever I find a roadside piece is I look it over really
well. I take all of the drawers out and I look for bugs, cockroaches, bed bugs. Nobody wants to
think about it but sometimes there are reasons that these pieces get discarded. So once I can
rule that out I do a sniff test and immediately I could tell this had been kept in probably a
damp room for some time. It just had that old musty lake cottage smell. Even though I hate
dealing with mildew and musty smells, I just had a feeling about this piece. So I scooted it up
and took it home. My name is Angie and I refinish furniture. Sometimes I paint and sometimes I don't
but I always do what I can to save old pieces from the trash. Welcome to my workroom.
So it turns out there was in fact a critter in this. It's not the kind you think. I sped him up
a little because he's kind of slow. I had already set the camera up and had gone to get tools.
He was a bit of a surprise when I came back but he got an eviction notice and I put him out in
the yard. I already know that the honking chunks of wood that someone bolted to the bottom of this
was probably a big portion of the smell that I was smelling as well as what you can see on the
inside of the backer board. There was some mildew there but these legs were the worst. They were so
damp and honestly I'm watching this back now and I'm cringing because I didn't have gloves on and
I probably should have. Ugh, gross. I'm gonna pull the rest of the drawers out and get to cleaning
this piece. I'm actually happy with how the drawers are. They're dovetailed. They're all wood.
This actually would have been a fairly well made piece back in the day. Actually you can see a
dryer sheet there. Every drawer had a dryer sheet in it when I picked it up. I think that was
someone's attempt at mitigating the smell but it didn't work. I made sure to vacuum inside and out,
get the back, and then I flipped this over onto its back so that I could deal with the mildew.
Now normally I would replace these back pieces but as you can see for some reason all of the
drawer guides are actually glued and stapled to the back board so it would have been really
difficult to take this apart. After only one treatment of that mold control all of the spores
are gone. Quite often the stain will remain but the active spores are gone. These light brown spots
on the back are not mold or mildew. You can actually see on the top here something sprayed
or splattered on it. It could have been mud from someone driving by. I have no idea but even though
it's not mold I'm gonna give it a spray anyway. There are so many things you can use to clean out
the inside of pieces when they have a moldy or mildewy smell. I've heard of using hydrogen
peroxide. A few people have recommended vodka. I've never tried that. Vinegar and sunlight is
good for very mild cases. This was an extreme case so I used a bleach solution. It does a good job of
cleaning and deodorizing and also kills any residual mold spores that might happen to be on
the wood. I put on my respirator and I'm using this clear odor blocking primer and I like the
spray because it gets in areas that's a little bit harder to get at with a brush. Now I've had
quite a few comments lately from people complaining how much I complain about odors in
furniture and how all old pieces smell. That's not true at all. I've seen two and three hundred
year old pieces that don't have an odor because they were taken care of. Literally nobody wants
to buy furniture for their clothes that stinks. It just does not happen so stop that. There's
nothing wrong with trying to rid a piece of an old odor. So I'm using some shellac. I'm just
going to give it a good stir here and then pour a little bit into this empty can and then brush
from that. There was still just a little bit of that musty smell so the shellac will take care of
that. Shellac is amazing at blocking tannin bleed through stains knots and odors. Now let's talk
about the top for a second. You can see there's a little chip in the veneer and then this very
odd colored coating. This is actually an adhesive wood grain much like you'd see in drawer liners.
The drawers themselves are not solid walnut but they have a walnut veneer over top of a
solid wood substrate and solid walnut handles. The top and sides are a walnut veneer over top
of pressed wood which is extremely popular and common in mid-century furniture. You can see
someone has driven a few finished nails in there for some reason so I'm gonna have to repair that.
Looking at this piece as a whole it has a very uniform sort of drab brown color to it.
Now unfortunately these handles are pretty securely attached but there's no way for me
to finish underneath of them without removing them. A couple of them even have splits in the
wood so I have repairs to make there anyway. So I'm going to extremely carefully pry these off.
Whenever I do this I pry from the bottom rather than the top and use a very thin putty knife to
get in there just a little bit and then I used my thicker one to kind of coax this off. I made sure
to number each handle as it was coming off the drawer so that I could put it on in the exact
spot that it was initially. You can see one of the splits here this is one of the ones that was
already there before I tried to pry it off and you can see that these were held on with six sets of
staples and a little bit of wood glue. Now if you're careful when you pry these off you can
just back these staples out really carefully you don't want to bend them and then when you're ready
to reattach the handles you add your fresh wood glue and you can put these staples right back in
the original holes. I've never had a problem with them coming off doing it this way as long as I use
wood glue with it. To fix those cracked handles all I did was push some wood glue down into the
cracks and clamp them up. Now when I'm clamping these I want to make sure that the two sections
stay level so I'm using a small clamp here and then I'll use a larger clamp to push those two
surfaces together and you can see I get a nice squeeze out there. It's time to take that old
finish off. For the drawer faces I used a scraper and then grabbed my surf prep with a 180 grit sand
pad. Because the majority of the finish was already gone 180 is plenty I don't really have
to remove much material all I'm doing is smoothing things out. After the 180 I finished up with a 220
grit. As I mentioned these drawer faces are a walnut veneer over top of a different solid wood
so that's why the top and sides here look a lot lighter so I'm going to have to stain those to
match the front once I do the clear coat. I used a 180 grit pad on the handles as well and then
hand sanded with 220 to finish up and get inside those little holes. As I sanded the old wood glue
off each of the handle bottoms I made sure to rewrite the number that I had just sanded off
so I knew which drawer that belonged to. A couple of these nails that someone drove in here aren't
even attached to anything you can see how easy that was to pull out. I'm going to take out these
two because they're not really doing anything and there's a third one there that seems to have caught
wood on the other side I'm going to leave that one in. This support block is not attached very
well or doing very much so I'm going to take it off and even though I don't show it on camera
at the end when I'm ready to put everything back together I'm going to reattach that
and re-glue it. This one nail is in there quite far so all I'm doing is driving it in below the
surface of the veneer so that I can put a little patch there and hide it. I'm using this epoxy wood
to fill this gap it's a two-part mixture you have to mix it together with your fingers
and this dries almost harder than wood in most cases.
I'm going to slowly build it up give it the rough shape I'm looking for and then I can
refine it with sanding later on. So I'm ready now to reattach the handles I've already done
on my sanding so I'm just using this little hammer to tap the staples out just a tiny bit
I don't want them all the way in yet but if I tap them out just a little bit then it's going to
help me know exactly where to set these down. I'm going to add a little bit of wood glue to
the bottom and sorry for the blurry shot here I'm going to just lay it down over top of the staples.
Now I don't want this handle full of glue to move around while I'm stapling it back together so I'm
just using a clamp to hold on here while I tap these in and while the wood glue is drying I'm
going to have two clamps on one side and a larger clamp on the other side.
I'm super happy and optimistic with how this is shaping up so far but now it is time to have a
look at the top. I already know that underneath this adhesive coating there is walnut veneer but
my question is why did they put this over top? I can see the faint indentation of a few scratches
I'm hoping it's nothing terrible but there's only one way to find out. There are different methods
you can use to remove this stuff. I like using a stripper. It somehow magically dissolves the
adhesive underneath without disintegrating everything and often you can peel it right
off and you'll see that in a minute. Is that not the most beautiful thing ever? Scraping paint off
and stripping old finishes is always super satisfying but for some reason peeling something
off just I love it. I'm pretty happy so far with what I can see of the veneer. I see a few scratches
but nothing terrible yet. I'm hoping the second half will be as good. While I'm letting the stripper
soak into that wrap on the other side I'm going to go ahead and add some more to this side because
now I have to scrape off the old finish from the veneer itself. Look at that gorgeous walnut
wood grain underneath. I'm already so excited. I'm going to be using Odie's oil on this piece
and I know it's going to be absolutely gorgeous. Can't wait for it. There it is. Burn mark. That
is the reason I think that they put a cover over it either to hide that or try to protect it from
happening again. I'm not sure. I continue stripping and scraping off the top and actually to my
surprise when I scraped the finish over top it actually diminished a little bit. Once I get the
of this goop off I'm going to add a little stripper just to that area and using a wire brush carefully
see if I can lighten it a bit more and it did work a little bit but only to a certain point
and then it stopped but we'll see how this looks after I do sanding. Okay so I should be in the
garage right now working on furniture but instead I'm in my car hands-free don't worry on my way to
a pet store where a man just brought in a mama bunny and two babies in a toilet box.
You know a lot of you guys love the little rescue bunny intermissions and they're cute and
it's a playful segment usually with you know upbeat music and it's adorable but there's
another side to this and this is it. On one hand I'm grateful that they didn't just dump them
outside or kill them just for existing but flip side is the pet store is not allowed
legally to take surrenders so I have to go get them. This wasn't really meant to be a depressing
rescue bunny intermission but it's just there is another side to it it's not all just cute bunnies.
This is mama bunny and one of her two babies that she came with. We were first told there were three
or four babies but they could only catch two of them. The other little baby, this little guy,
I'm not going to show you his injuries because I just don't want to put that on my channel but
his other eye was extremely bad and we're pretty sure he's blind and that I were trying to save it
and he also had a pretty bad injury on his foot which we're also trying to save. Later that day
we get a call that a third baby had been found, this little guy, and then a couple of days later
this little guy. We're figuring they're actually about three weeks old and there was a little bit
of a lag between when I picked this guy up and had to take him into the lady who runs the rescue who
is also a vet tech so it gave me a chance to take him home check him over for any injuries check his
ears and his eyes and his skin and he seems to be doing pretty good. The last update I got is that
mom's doing great the little blonde bunny is doing great and the guy with the eye and the foot
injuries is doing better but he's not out of the woods yet so I'll keep you updated on that little
party of five. If you do want to find out more about these little guys you can find the rescue
on facebook under 10,000 carats rabbit rescue. After my first bit of sanding with 180 grit there
were some holes and dings that I needed to fill so I used some walnut wood filler let that dry
and then went in and hand sanded with 220 and that gave me a nice smooth surface to apply my odies
to. You'll notice there are a few little light scratches they weren't really deep enough to try
to steam out with an iron and I think they're going to blend in just fine. When you have wood
grain like this on the drawers often there is a pattern so I'm just moving them around here until
I figure it out and then I'm going to go underneath and mark where the drawers go so that they don't
get mixed up again. More often than not when you get a dresser like this the drawers are usually in
the wrong spots. So this girl needs some legs and I have legs for days. I have several drawers
and containers full of old legs. These ones I think will be perfect with some cleaning up.
I apologize for the blurry clip here but I just used a scraper to get a fair bit of the old finish
off and then I'm going to go in and sand the rest. I used a 100 grit to blast through any remaining
finish first and then I went in with a 180 as my final. I'm going to have to stain these so I don't
want to go too high with my grit. I used this Mastercraft tool here to try to remove as much
of the rust as possible off the threaded sections and it did a pretty good job. As is the case with
most walnut veneer pieces I do that I use Odie's oil on, you're going to see both heartwood and
sapwood so you're going to get two different tones and that is always a dilemma when it comes to legs.
Do I stain the legs to match the heartwood or do I stain the legs to match the sapwood and most of
the time I do it darker. This time I'm going to do it a little bit lighter and closer to that sapwood
so I'm excited to see what it looks like. I'm using the Universal Odie's oil and I'm just applying it
with a 1500 grit Mirka Merlon gray pad. Odie's is an awesome tung oil based finish. It's not
an oil like you might be thinking of an oil. It's not like a danish oil or a hemp oil or anything
like that. It's kind of its own thing. It belongs to a group of finishes called hard wax oils.
It is a bit labor intensive to put on but for me I actually like that part of it and it just
brings out the natural depth and beauty and warmth of the wood like no other finish I've ever tried.
I just wanted to take a moment and say a huge thank you to everyone who has helped support
my channel whether that's subscribing and liking and commenting on my videos, sending super thanks
and buy me a tease amazon gifts. Speaking of which there's something that came in the mail a couple
of days ago that you don't see me use in this video but I did end up using it on this piece and
that is this Makita pin nailer. I wanted to give the walnut handles just a little extra grip and
the 23 gauge pins are perfect for something like this because it's less likely to split the wood
than a finishing nail. There was no note with this gift so whoever sent this to me
you rock. Thank you so much this is going to be a huge help in my workroom.
My last step is just doing these little touch-ups and I'm using these mohawk graining markers to
sort of mimic the wood grain where I used the wood epoxy to fill in the gap.
This poor stinky forgotten dresser was literally dumped at the curb in front of the dumpster
ready for garbage pickup. It was that morning and I got there just in time. I had no idea if I was
going to be able to save this piece or what my intention was with it but I'm glad that I was
tipped off and I'm glad it was still there when I pulled up. This took a few days to pull off
but I'm so excited to show you what this dingy dumpy piece looks like now. Thank you so much
for watching and I will see you next time. Okay I just finished editing the video.
I was getting the reveal ready and I noticed I messed up. It happens um but here's the thing.
I was so confused by it that I had to go back to the before picture. What I noticed in my after
picture is that the middle column of drawers, the handles on the middle column of drawers,
they have a certain grain pattern okay and I didn't notice before until I was looking at the
video but the grain pattern is messed up. I can't change the drawers around because there is a
pattern on the drawers that flows from one column to the next and because I numbered each handle as
I took it off the drawer I could not figure out how this happened so I went back to the before
picture and even though the drawers are in a different order than they should be I could still
figure out which drawer was which and I realized I didn't mess up. The manufacturer messed up.
On two of the drawers they had the handles reversed and they used toner to cover it up
so two of the handles on the original piece were so dark you couldn't even see the pattern on it
and it was those two drawers. Anyway I'm super upset because those handles are now glued and
pinned into those drawer faces but I can't unsee the wrong pattern so I don't know what I'm gonna
do. Um I would have to literally take the handles off and put them on the correct drawers which
means I'll probably have to redo those drawers but keep that in mind when you're looking at the reveal
pictures. The dresser is absolutely beautiful. I'm so happy with it with the exception of that
and I'm just gutted that I didn't notice it before it was too late but I'm also relieved that I
didn't mess it up. As I pulled each handle off initially to redo it I marked it and then marked
the drawer so that I could put them back together and that's exactly what I did but unfortunately
I put them back together the way they initially put them together wrong and that really sucks so
pro tip make sure the manufacturers didn't mess up before you put something back together.
Anywho, enjoy the reveal. I want to cry.