https://www.youtube.com/user/VideoJoeShows How to install & apply self adhesive tape to a drywall patch hole is what this howto video is about. VideoJoe has just removed & demo'd an electrical duplex receptacle & now he is ready to patch the junction box hole. VideoJoe likes to use self adhesive webbing tape when he is patching holes in sheetrock or making patches in drywall. Could you use regular paper tape over a drywall patch hole? Sure you can but it takes another step to do that & self adhesive webbing tape seems to be a little cleaner & easier to use especially when covering a small hole or patch on a sheetrock wall. Watch & learn as VideoJoeShows you how he applies self adhesive webbing tape over an old duplex outlet junction box hole. Patching a drywall hole is easy...when you know how. https://www.youtube.com/user/VideoJoeShows
Get back up to our project here. I'm going to go ahead and put webbing tape over that.
Okay and the thing I like about webbing tape is it's kind of sticky. This stuff is a little bit
old but it's still going to work. And see I can put it on just like that and hold my
my knife on there and rip it off. You got to hold this tight. Let's see if I can do it here.
Oh kind of moved on me didn't it? It's kind of hard to do one little piece like that.
But see I could do I could put that like that and then I can put another piece on the side of it
like that. Let's see if I can't rip that off a little better this time.
You kind of want to do it at an angle as you're pulling. See I kind of pulled it out at 45 and
that came off easier. Now see I can put quick I'll put quick set mud over that and that'll kind
of fill up behind there behind the the little holes and that'll make a nice patch. And I can
put a third piece on there too if I want. I mean I can I can do pretty much whatever
I choose on that. Now see there how it pushes in a little bit? You think well what's the deal with
that? Now here's another here's something else you could do. You could put something on like this
and then you kind of push it into the hole a little bit. You want just a little pull that off
and then you can fill that up with mud and then sandwich another piece on there. I mean however
you want to do it but we get done with that it's going to be fine. Okay and you could do that with
tape with paper tape if you want. You have to cut a little strip and kind of fold it in and and have
a little pocket in there and then back out. You know fill that up with mud put another layer on
top of it. You know anything to make that nice once once it gets all finished off we'll go ahead
and caulk that edge there too. This whole edge of this door trim is going to be caulked. Make it
look really nice. Okay so I'm going to go ahead and decide I'm just going to put this over I'm
going to make a pooch on it pull that at an angle like that and you know this webbing tape here
is kind of old but it's still going to work. It's not as sticky as brand new webbing tape.
I'm going to go ahead and put just a third layer on there
and this webbing tape will work just as well once I get the mud on there. The secret here is to use
Kwikset. I don't want to use regular taping all-purpose joint compound there or topping
material or anything like that. I want to use Kwikset. I want to get a couple coats of Kwikset
on there and get that good. Then I can taper in all the finished mud
over that and sand this area out. It'll be just fine.