How to Sand Drywall Patch

VideoJoeShows
86 followers
4 Video Views·Apr 18, 2026
https://www.youtube.com/user/VideoJoeShows
How to sand a drywall patch is what this howto video is about. What type of sander are you going to use on the patch area when you're sanding? How much do you sand....like a lot?. What do you do after sanding the wall? What is a paddle sander? Watch & learn as VideoJoeShows you how he sands a drywall patch area.
https://www.youtube.com/user/VideoJoeShows
Got this patch all nicely dried now.
And I can see all kinds of imperfections
on that last coat that I put on.
And incidentally, I've got a drop light like this.
And see, if I don't have that on the wall,
I can hardly see where the imperfections are
and I could sand this and not hit everything.
But if I take my drop light and put it here,
leave it kind of at an angle against the wall,
oh, I can see all kinds of stuff.
So that's a little tip for you,
is to get a light like this and set it at an angle
and you can see everything.
The last thing you want is to leave
any little outside ridges or anything on the inside
that will make this patch appear after you paint it.
That's the last thing you want.
And so I'm just gonna sand this.
You don't wanna sand too much.
And that's another reason why it's good
to have a light on here.
Because you can tell how much you need to sand.
Let's see, right in there, that's good.
I see a little ridge just down the middle.
Get that a little bit.
That ridge went away.
Here's another one down over here where I blended it in.
Now you blend it in with the sander.
My little paddle sander, I like this thing.
It's way better than a sanding block, you know?
You get one little piece of sandpaper,
fold it over a little piece of wood or a sponge pad.
Because the surface is bigger and it just works better.
If this was the only patch I was ever going to do,
yeah, I'd probably get one.
But you know, I do enough patches now
to invest a little bit of my money
into the tools that I have.
And this is just a plastic, heavy plastic paddle sander.
And it's got a sanding pad on here.
I bought 10 of these at a time.
And then you unscrew this and put that on there.
And then I pull the edges back
to get up in the inside corners and stuff, the walls.
And I use this for all kinds of stuff now.
That looks really good.
That patch is now blended right into the wall.
And I don't think I need to put any more mud on there.
Now, if I didn't do a good enough job,
I could go over this again with a tight skim coat.
And before I went and used the six inch, you know,
and bridged it over.
Well, I could use my 10 inch
and I could go over that one more time
with some tight skim material.
And I just use the same stuff.
You know, all purpose joint compound.
I like to brush these down
because before you put your primer on,
you've got to have your wall dusted down.
If you don't, can you imagine how well your paint
is going to stick to the wall?
Because it's got all that dust on there, you know?
Now, I think I'm going to go ahead
and I'm going to put some tight skim on there
just to show you how that works, okay?
You're not going to get all the dust off,
but you're going to get lots of it off.
And if you put another coat on,
this is what you want to do too.
After you sand, that sanding material is so fine
and it sticks to everything.
That's why I've got everything masked off
and I got plastic up.
I got craft paper down on the floor
and the air conditioner turned off,
ceiling fans off, all that kind of stuff.
This stuff gets all in the air and it gets everywhere, okay?
All right, that's good.
So I'm going to put some tight skim material on here
and show you how that's done.
