How to Apply Teflon Tape to Plumbing Fitting Threads

VideoJoeShows
86 followers
54 Video Views·Apr 17, 2026
https://www.youtube.com/user/VideoJoeShows
How to apply teflon tape to plumbing fitting threads is what this howto video is about. Installing & applying teflon tape to threads of any kind of plumbing fitting is easy...when you know how. Make sure you put the teflon tape on the right direction of the threads. If you put the teflon tape on incorrectly then your plumbing fitting may leak. What? It makes a difference which direction you install teflon tape on the threads to plumbing fittings? Yes! Watch & learn as VideoJoeShows you how to install & apply teflon tape to plumbing fitting threads.
https://www.youtube.com/user/VideoJoeShows
I always carry Teflon tape in my nail bag or somewhere close so I have some.
Okay, I hope I have enough. If I don't I may have to go back to my place and pick some more up.
Here's that tape. I've showed you on other videos how to how to put Teflon tape on.
Okay, but you want to put it on and kind of hang on to it.
You want to go the same direction that you're going to screw it in.
Okay, so when I pull it off that same piece is going to tighten up in the fitting. Okay,
you do it the very opposite as you're tightening it. As you're tightening the fitting into the
other end you're actually loosening up the Teflon tape. Does that make sense? I don't want to do
that. See I don't want to get it over that edge either. So I'm just going to go from that top
edge on down. I'm keeping pressure on here as I go. I'm putting a few spins on here. You never
know how much to put on. I just put on three or four spins, whatever I feel like. Because see,
if you get too much in there it might not fit on your threads. The last thing you want is only to
put on hardly any and then you're not really getting a good connection, are you? Okay,
I got enough on there. Pull that off like that and just keep pushing that on there. Okay,
that's all ready to be put in. Before I do that, I mean actually I guess I could do it now.
I probably should because I don't want to mess up these. I'll screw that on there and then I'll
hold this whole thing and do this one. Because if I do it now it might get loose on there when
I'm trying to tighten this up. You know, it'll probably be fine but that's just what we're
going to do. Okay, so now I get to screw that in and see if it fits. I'm pretty sure it will.
