Making a New Backsplat for an Antique Chair - Thomas Johnson Antique Furniture Restoration

Thomas Johnson Antique Furniture Restoration
41 followers
4 Video Views·Nov 10, 2011
Tom Johnson of Thomas Johnson Antique Furniture Restoration in Gorham, Maine creates a new backsplat for an antique mahogany chair in need of repair. Tom has been restoring furniture professionally since 1979. Visit our website at http://www.thomasjohnsonrestoration.com, call us at (207) 222-2266, or write us at [email protected]. And for those on the west coast looking for custom framing, be sure to check out Tom's daughter's shop, https://www.emcollier.com (@emcollierframes on Instagram).
This is a nice sort of standard mahogany dining room side chair.
And what's happened is that the backsplat has become delaminated.
It's made up of five pieces,
a core and two pieces of veneer on each side.
It's all come delaminated as you could see.
There's parts of the underlayment missing and there's also
parts that are broken all the way through right there.
I think the best thing to do is to rather than spend a lot of time trying to
repair this is to make a new backsplat.
So I'm going to take a heat gun and try to heat up these joints enough so that I
can take this backsplat out of there.
So now I've cut a piece of three eighths Baltic birch plywood.
That'll be the core. I'm going to veneer both sides of this.
And I've cut some pieces of plywood and MDF to use as cauls for the glue up.
Here's a nice piece of mahogany veneer that I have, so I need to cut it in half.
It takes what appears to be a lot of glue.
Okay, now we'll take the clamps off and see what we got.
Mahogany veneered plywood ready to trace out the old one on here.
Okay, now I have my drawing on here.
I can start to drill it and saw it.
Okay, now I've got a lot of sanding to do.
I'm going to stain the inside of my cutouts here,
the plywood part with some mahogany stain.
Then I'm going to sand the outside so I'll see any stain that gets on the
outside. I'll be able to sand it off.
Okay, so now I've let that stain on the edges dry overnight.
Now I'm going to sand both faces and to get off any stain that dripped on those
faces. Okay,
I've sanded it both sides up to 150 and now I'm ready to seal it with shellac.
But first I need to tape off where the glue joints are so they don't get any
finish on them.
The shellac has dried overnight. I'm going to sand it with some 320.
This is the natural color of wood.
I'm going to tone it a little bit with some medium brown walnut toner to bring
it into the right color. I've sprayed a couple of coats on this on both sides.
Now it's ready for the final. Before I sand for the final,
I've mixed some powdered stain in some shellac and I'm just going to put a
little color on the inside of my scroll work here where I can still see the
plies of the plywood.
Before I go any further and put the final coat on this,
I want to make sure it fits.
My new piece is a little thicker than the old one.
I need to take a little bit of wood out there.
Okay, now I'm ready to do the glue up.
Now I'll take it out of clamps
and now I've just got to do some touch up work.
I've got to fill in little spaces in these joints.
I've got a little staining to do where I scraped and then I'll put a cat coat of
satin lacquer on the whole area.
Just melting a little bit of a wax into these joints.
This chair also had a lot of scuff marks and a few ragged edges here.
I'm just going to go over those areas with a little bit of 220 sandpaper.
And now I'm just going to pad a little dye stain over this,
these elements of the chair. All right,
now I'm ready to spray a final coat of satin lacquer just on this upper part.
I think it'll bring everything together. Okay.
It looks like our final coat of lacquer went down pretty well and I think the
chair looks great. Here's our old backsplat. If you remember,
this is the one that's deteriorated so badly that we decided it'd be best off
just making a new one. And here it is.
We'll stay in here for a few minutes, okay?
