How to Install Masking Tape Over Thermostat

VideoJoeShows
86 followers
3 Video Views·Apr 15, 2026
https://www.youtube.com/user/VideoJoeShows
How to install masking tape over an existing thermostat is what this howto video is about. What type of masking tape should I use when covering an existing thermostat before I sand the walls, or do a sheetrock patch around the thermostat, or painting around a t-stat? How long can I leave the masking tape on there before it gets sticky? Why should I put masking tape on my thermostat anyway? I will be careful. Famous last words for sure. Installing masking tape around a thermostat is easy...when you know how. Watch & learn as VideoJoeShows you the proper way to mask off an existing thermostat, with masking tape.
https://www.youtube.com/user/VideoJoeShows
This looks all nice and dry now. I'm going to get ready to sand this, but before I sand it,
I've got to, I want to put some masking tape over this. I want to get dust, find dust particles all
in my thermostat if I can help it. I'm just using blue tape. You can use regular masking tape if you
but I can just kind of wrap this around. I'll make sure I keep it off the wall,
but I put it in such a way to where I can cover all this. I guess I can just wrap this edge like
that. You know, it's all, you ever heard, it's all in the prep work.
You know, anybody can put stuff on the wall, but it's prepping it properly and doing,
spending a little bit of time on your project. See, now I can just kind of wrap this around
top of that. Looks like dust will kind of get into the top, so I better put another piece there.
Hey, at this point, masking tape is cheap for your project. You know,
use it. That's what it's there for. I know this takes a little bit longer for your job, but
you're going to keep the dust out of there. That's what we want.
You don't want to just go in there, slap bash, thank you ma'am, and get dust everywhere. Oh,
I'll just wipe that off. I'll just blow that off. Yeah, you could, but you want to mess around
with your thermostat later because you've got some dust all in the little computer components or
drip down through the back and all that. I don't. Be easy enough to take this back off.
I'm going to pull this tape off when I get done, but if you were to leave this on here for two or
three days, let's say you've got to use the blue tape. If you use regular masking tape,
it could get all sticky when you pull it back off. Then you've got to clean everything off
and don't fool yourself and think you can keep this blue tape on there for weeks on end because
you may have a problem with that too. So I only like to put that on
and leave it on for short periods of time. Be safe rather than sorry.
