https://www.youtube.com/user/VideoJoeShows How to apply all purpose joint compound around an existing wall thermostat is what this howto video is about. VideoJoe is in the process of finishing drywall mud around an existing thermostat wall location & now it's time to apply a coat of all purpose joint compound. He just applied 2 coats of quickset to the wall prior to this next step & the quickset dried the same day so now he can apply the all purpose joint compound & not lose time with his project. Yes there is a definite process for patching & finishing sheetrock drywall patches & repairs so do it right. Applying all purpose joint compound around an existing thermostat is easy...when you know how. Watch & learn as VideoJoeShows you how to apply all purpose joint wall compound around an existing thermostat. https://www.youtube.com/user/VideoJoeShows
For this next coat, I'm going to make sure that my putty knife is nice and flat edge there.
I got my sanding pad here. I'm just going to do that to it and get off all those burrs. Now,
if you got a little putty knife, you can do the same thing. You can get it nice and sharp and
smooth because you don't want any little ridges on this edge. So, when you pull it down, especially
down here in the corner, when I pull that down, I want it all nice and smooth. So,
I'm going to work on this a little bit more and this is going to work out good.
The sanding paddle comes in handy for lots of things. Sweet! Okay, now I'm putting some regular
sheetrock mud on here, all-purpose joint compound. That's going to get this really smooth.
Once you do quick set, if you think it's really smooth, you're only kidding yourself if you think
you can paint over that because trust me, your paint is not going to take on quick set like it
does on regular sheetrock mud. Okay, so you're always going to see that patch. You ever notice
that? You put something on there and I'll be able to point out exactly where your patch is each and
every time you use quick set and don't put a finished sheetrock mud over it. Okay, gotta watch
that. Now you know, right? That's why you always got to put a little layer of regular mud on
and it's good to do that anyways because you're kind of blending it into the existing
and the existing has regular sheetrock mud on it. I'm going to do that as nice as I can
and got my little plastic putty knife here. Let's see how I can do over on this edge
and it's working, working good enough for what I need.
You know, I couldn't do this if I didn't cut that plastic knife down, you know, just make it good
enough to where I can sand it later, you know, and blend it in to my existing. Once this dries,
I'll lightly sand it all around. Now I'll put some masking tape over the front of this because
I don't want to get dust inside this thermostat. Then I'll look at this and decide if I need to do
some tight skimming and if I do, I'll use a six inch knife and maybe go all the way around this
with a tight skim and then when I sand that, that'll blend all this in and it'll look perfect.
Won't even look like there was a patch there at all.