Chapter 10 - Escapement Theory

Chrono Chronicles
8 followers
1 Video View·Apr 10, 2026
Let's discuss the escapement in more detail.
The escapement is the heart of the clock. There are many different types of escapements,
but the most common belong to a class of escapements called anchor escapements.
They get their name from the fact that their shape somewhat resembles a ship's anchor.
The two most common anchor escapements are the recoil escapement and the grand deadbeat
escapement. Most inexpensive mechanical clocks have a recoil escapement. The higher grade clocks
more often have a deadbeat escapement. Each has many variations. Here is a recoil anchor
and a grand deadbeat anchor. And here is a strip version. Even though they look very different,
the working surfaces or pallets would have the same angles whether in full anchor form or strip
form. American kitchen and mantle clocks most commonly have a strip recoil escapement, but many
have a strip deadbeat. There are three functions that every mechanical escapement must perform.
It must alternately stop, then release the forward rotation of the escape wheel in synchronization
with the movement of the pendulum. This stopping function is called the locking phase. It must
provide a regular impulse to keep the pendulum swinging. It must have some clearance called drop
where the pallets interface with the escape wheel so that the teeth of the escape wheel can
neither skip by the pallet and run uncontrolled or bind against the pallets and stop the escape
wheel from rotating. The anchor recoil escapement has many variations, but they all function the same
way. Remember that all escapements must alternately stop, then release the forward movement of the
escape wheel in time with the pendulum. In a recoil escapement, the locking phase, where the
forward movement of the escape wheel is stopped, is replaced by the recoil. The term recoil is used
to describe the slight backwards movement of the escape wheel after each forward movement.
Recoil occurs because the point on the anchor pallet where the escape wheel tooth touches
is a flat surface. The inertia of the pendulum causes the pallet to dip down past the point
where the escape wheel tooth initially touched when it first encountered the pallet.
It pushes the escape wheel tooth down with it, reversing its motion. Recoil escapements are
relatively easy to make and are very forgiving. They tend to work even if they're worn or out
of adjustment. Even the simplest strip anchor is still often operating after 100 years or more of
continuous service. Given the best of conditions where everything is as perfect as possible,
the recoil escapement can expect to keep time to about five or ten seconds per week.
Our movements are far from optimal. A minute or two a week is considered good for this type
of movement in a home environment. There are three distinguishing features that help identify
a recoil escapement. First, the anchor is asymmetrical, which means the entry and exit
pallets have distinctly different shapes. The strip version of the recoil anchor looks much
like an unfolded paper clip. The entry pallet is shaped like a hook. The exit pallet is a simple
angle, somewhere around 90 degrees. Next, there are only two working surfaces or pallets that
contact the escape wheel teeth, one on the entry side and one on the exit side of the anchor.
Notice that the pallet surfaces are flat. Finally, the escape wheel teeth point away
from the direction of rotation. If the escape wheel turns clockwise, or towards the right,
the angle of the escape wheel teeth will point in the counterclockwise direction, or to the left.
Notice how the escape wheel moves forward and then momentarily reverses direction before moving
forward again. This momentary reversal is the recoil. Now let's slow things down so we can see
exactly what's happening. Directly after the recoil, we see the escape wheel move smoothly
forward as the escape wheel tooth slides along the pallet. This is when the escape wheel is giving
impulse, or energy, to the pendulum. When the impulse phase is complete and the escape wheel
tooth reaches the end of the pallet, there's a small gap between the pallet on the opposite
side of the anchor and the new tooth that is ready to strike it. This gap is called the drop.
The tooth giving impulse slides off its pallet and the escape wheel moves rapidly to jump the gap
and the new tooth drops onto the opposite pallet. The overswing of the pendulum momentarily pushes
the escape wheel tooth that just landed on the pallet in the reverse direction, creating the
recoil, and the cycle starts over again. Drop, recoil, impulse. Drop, recoil, impulse.
Now back to normal speed.
