How to power down a mainspring to safely disassemble clock

Chrono Chronicles
8 followers
19 Video Views·Aug 16, 2025
Hey guys, welcome to Chris' Clock Shop.
So in this short video, I just want to demonstrate more closely, for the beginner, how to let
the power down on a count-wheel movement like this, where the spring is open.
Now traditionally, you would use a metal C-shaped clamp, which you'd actually fit over the spring
after you wound it.
So the first thing you do, is you take your bench key, and if you look here closely, you
can see there's a ratchet gear, okay?
There's a ratchet gear here, and this is a click that catches on the ratchet, and then
there's a wire spring, this silver spring holds the click tight against the ratchet.
So as I rotate this one turn, the click will automatically catch on the ratchet, and if
I let go of the power, it won't unwind.
So you would wind the spring up as much as you can, to still allow for a little bit of
turn in the ratchet, and you'd put this C-clamp over it.
However, I've found in my experience, that using a very good, durable zip tie around
the spring works a lot better, and is easier to work with.
So I put my zip tie on here, and now I'm going to show you how I let the power down, loosen
the spring onto that zip tie.
So I'm going to rotate this, so first thing I have to do, is remove this silver spring
from the back of that click, so that when I rotate my ratchet with my, now hold this
tight because it's going to unwind, if you don't hold it tight.
So I'm going to rotate this, to move that click out of the way, and then I'm going to
very carefully and gently, allow that ratchet to unwind, with the click out of the way.
And what's happening is the spring is unwinding, but it can't because it catches on the zip
tie.
And then once it's fully taut on that zip tie, all the power is being held by the tie,
and not the gears.
So now I do that, and it's safe to actually disassemble the clock, the gears won't go
flying everywhere, because all the power is held by the zip tie.
So many of you professionals already know about this, but I thought as a beginner, it
might be useful to show you a very detailed way to do it.
Alright, thanks for watching.
