https://www.youtube.com/user/VideoJoeShows Are all toilet tank gaskets created equal is what this DIY howto video is about. VideoJoe has removed a toilet tank spud nut & the adjoining rubber gaskets & is getting ready to install a new toilet tank rubber gasket assembly. His was a rubber triangular gasket & he was wondering what if I can't find one. He went to a few different stores before he found the same rubber gasket but then he got to thinking...."could I have done it a different way with a different type of toilet tank rubber gasket?" I think the answer to that is Yes. He could have gotten a separate rubber doughnut gasket then individual rubber washers etc. for the toilet tank bolts & he could've done it that way too. He took his old parts to the store with him & he would suggest you do the same so one way or the other you can get the toilet tank rubber gaskets the store has so you can repair your toilet. Watch & learn as VideoJoeShows you what he's going to do to make his toilet tank gasket repairs. https://www.youtube.com/user/VideoJoeShows
AI Generated·May contain errors
I'm back from the store. Let me tell you this was a good idea that I brought this with me to the
store because I thought ah somebody will have exactly what I want and they had different
things at the store so I'm glad I went because the first couple hardware stores I went to didn't
have it. I was a little bummed out that I might have to go to a wholesale plumbing house but I
finally found it and it matches up pretty close. Now this one here had a little gasket inside it
right here and it's kind of a heavy paper gasket and that was down there like that the nut went
against there like that and tightened up but the new one didn't come with this little gasket and
I don't think I really need that gasket. There's plenty of rim around there so when I tighten that
up that's going to be just fine. I talked to the guy at the hardware store and he helped me out
and I don't think I'm going to have a problem with that. Okay so that that lined up. This is a double
one well you know lots of toilets only have this one here you put it in and you tighten it up and
then they have a different arrangement so that's what that's that's what I was telling you before
not all toilets are the same not all gasket assemblies are the same so you go to the store
make sure you take all of the parts so that you can match it up exact. Now here's here's one thing
I found kind of odd this rubber gasket here wasn't very thick and that fits on there
up in here and it goes inside the toilet I'll show you all about it but
this is the one that came with this new gasket assembly it's a little bit fatter
see how much fatter this one is as opposed to this one right there and again it'll fit on there just
fine and if anything it's just going to give a little bit more of a better seal this fits inside
the tank and there's plenty of threads to thread it on there and that just means this area here
is going to set up just a hair higher than this one did and if anything it's going to work better
because this could have been leaking and this might have been leaking too but I think I got
all my parts here and I'm all set to go here's one more thing I wanted to show you too on this
old one as you push this back up in there remember it had this little nib on here where the bolt
went through and that kind of mashed down well this new one doesn't have that little rib around
there it just goes straight up if anything that's just going to make it easier to slip in there
you know and then I could I might have to cut that off or or when I tighten the nut down from the
inside it's going to smash down and it'll it'll be fine and the other thing I noticed too
um it gave me new whole new set of brass uh bolts now these are brass too
see my existing ones were shorter than the other ones I'm not sure if I'm going to use these or not
I'm going to have to once I put this up I'll kind of set that because last thing I want is for this
to hang down too far and to see it if you're walking over to the toilet oh what's that hanging
down oh that should have been cut off so I might end up using these if I do use these I'll use
the new washers with these and the new nuts if anything I don't have to use the old ones
and the other thing I found interesting was this set here gave me some black washers too
this is rubber and I like that because before when this bolt came through follow this now when
this bolt came through here you tightened it up with a washer and the nut and that fit tight
right up against the porcelain tank well it's it's you know they did one better
we've got this so now you've got a rubber washer there and then the new metal washer goes there
like that then the nut that way when you tighten it up you're not tightening up the metal washer
right on the porcelain because lots of times if you tighten this up too tight you're not watching
what you're doing you could crack the the tank now I'm still going to have to be careful but
this is just a hair bigger than the washer and once I tighten it it's going to have a tendency
to still make it tight but it's going to give just a little bit because the rubber is right
up against the porcelain tank not the actual metal washer you know what I mean so if you can
ever do that with yours you know they even sell these separately so if you ever have to do a
repair and your new set doesn't come with that think about that before you tighten that up that
gives it just a little give and you're less likely to crack that tank last thing you want
to do is over tighten those nuts or you'll be sorry