Chapter 4 in the Art of Arrow Making Series is a how-to guide for making arrows from wild shoots found in the forest - commonly known as “shoot arrows”.
Almost every region and climate has something growing in it that will produce good arrows. I couldn’t possibly list the hundreds or thousands of species that are suitable for the task. You’ll just have to explore and experiment!
This method has been used since the dawn of archery and is without a doubt one of the most widespread throughout human history. It was a valuable skill for our ancestors, and remains an excellent option for producing quality, hand-crafted arrows from wild plants to this day.
I hope this tutorial proves helpful in your quest to find and make arrows from your local environment. Thanks for watching!
AI Generated·May contain errors
Welcome back everyone to the Organic Archery YouTube channel. Today's video is chapter four
in the six-part art of arrow making series and today I'm going to teach you how to make arrows
from wild shoots gathered in the forest. Making arrows in this way is probably the simplest of
all the methods in this whole series but it's also the most time consuming because of the
additional time required to get them dry and to make sure they dry straight. So today I'll show
you harvesting dogwood, morrow's honeysuckle, buckthorn, and wild rose just so you have some
examples of various types of plants that have offshoots that are straight enough to make arrows.
I'm not going to take the time to list the hundreds or thousands of species that make good arrows
so go for a walk in the woods and look for something that seems to have very straight
offshoots and give it a try. So long as it's not willow, chances are it will make a nice durable
arrow and willow will work by the way and was used historically but I exclude it from the good arrows
list just because it's so flexible that it takes a much larger diameter with a willow shaft to
make a serviceable arrow for a hunting weight bow but if you have willow and that's all you have
access to by all means you know go for it. Just make sure you harvest them in a larger diameter
than you think you'll need and it may take some experimentation. The first thing we need to do to
get this build rolling is head out into the woods and find some nice straight shoots so let's do that.
The only tools you'll need are a set of pruning shears and a small piece of rope to make transport
easier. Here we are at my favorite patch of gray dogwood on the Missouri River. You can see just
how straight dogwood grows when it's in a river bottom protected from the wind. The harvesting
process is pretty self-explanatory. You can see that the offshoots from the main trunks are the
ones that grow the straightest and you're looking to take ones that are about the size of the arrows
you want to make or slightly larger and I cut them to about 36 or 40 inches. Even when they look
extremely straight relative to everything else in nature they're still not perfect. I will cover this
in detail shortly but make sure to harvest twice as many as you think you'll need. I've moved to a
new location with some nice straight buckthorn shoots and this stuff is abundant here but people
don't like it because of how prickly it is but in the springtime it gets flowers that smell amazing
and the pollinators love it. The offshoots that are gray are dead and usually pretty brittle so
you want the ones with more of an orange color and you're definitely going to get some boo-boos
harvesting buckthorn. I'm still on the same piece of land and we're looking at morrow's honeysuckle
now. This is actually an introduced and invasive species that completely overtakes the understory
and kills all of our native species but you can see that it grows very straight and it's hollow
on the inside but it does make nice arrows. This stuff can get almost as big as a tree and people
will practically pay you to clear it off their land. Same piece of land again right next to the
buckthorn and honeysuckle. I found a nice stand of wild rose. Wild rose is great at making you
regret you ever discovered it makes excellent arrows because you are gonna bleed for these.
Here is the morning's work. From bottom to top is dogwood, buckthorn, honeysuckle, and wild rose.
I pick out everything I want to work right away and I bundle the rest tightly for long-term
storage. I picked out the best of the dogwood to start work on it right away and the rose is going
to get de-thorned and debarked before it goes into storage. Here are a couple of pro tips for
gathering wild shoots. Number one, harvest twice as many as you think you'll need.
Everything looks relatively straight in nature but when you get back to the world of squares
and straight lines you're going to be looking at those shoots wondering how you ever could
have thought they were straight while you were out there. So you'll probably cull 30%
right out the gate because they won't be straight enough and then while you're sorting and sizing
the remainder of them you'll probably lose about another 20% to you know unforeseen damages or
difficulty straightening. The second thing is in regards to sizing the shoots while you're out
there. Obviously if you pick ones that are too weak and flimsy they're going to get cold right away
and that's just a waste of your resources. Those shoots would be better left to mature for another
year or two so they make better arrows. You can also get them oversized. If you pick ones that are
too large in diameter you can always reduce them when you get back home and that makes a nice arrow
because you'll end up with a perfectly parallel shaft and of course the third option is to you
know if you're lucky find some that are already really close to finished diameter right out the
gate and that's pretty rare but if you spend enough time out there looking for arrows you know
eventually you're going to get matched sets. This is a set of four Maros Honeysuckle that are about
as close to perfect as I could ever hope from nature and they are about 11 30 seconds at the
point with a beautiful even taper to 5 16ths nocks and tapered arrow shafts are going to fly really
well. So here are the cliff notes. Take twice as many as you think you'll need. Only take the
straightest shoots you can possibly find because they're not going to look nearly as straight as
you thought they were when you get home and only take either slightly oversized shoots with the
expectation that you will reduce them or shoots that are very close to the finished arrow diameter.
Leave the flimsy ones behind so they can mature for another year or two. My favorite method is to
start green straightening these right away so that the wood is being trained to stay straight as it
dries and this is about all the straighter I'm going for because the green wood is flimsy and
it tends to warp but we're basically just trying to train it to stay straight as it dries. I feel
this gives a much better finished product that requires almost no heat straightening in the end.
Here's an example of morrow's honeysuckle that was trained to stay straight as it dried using the
green straightening method. Green shoots are very easy to straighten with just the palm of your hand
and again we're not going for perfection we're just trying to improve their straightness a little
bit more each day. After green straightening with the bark on for one week we need to take the bark
off to speed the drying process and to size the arrows and I'm just using an old bandsaw blade
scraper here but a pocket knife also works really well for bark removal. Next we need to size the
arrows because the bottom will be much larger due to the natural taper in the shoots so I'm using my
trusty drill bit sizing guide here and a small thumb plane set to take off very fine shavings
and I'm just going to continue to reduce these until they're about two sizes larger than I hope
for them to finish because these will shrink as they dry. So for this example I want these dogwood
shafts to finish around 21 60 fourths which is just a little bit less than 11 30 seconds so I'm
going to size them to 23 60 fourths so they have room to shrink. I just continue to remove material
from the thick end until the entire arrow fits through the desired sizing guide. So depending
on where you live and what you find access to you may end up with a hardwood shoot like this
dogwood here that is solid all the way through or you may end up with something like morrow's
honeysuckle or wild rose or river cane for example that is pithy or hollow in the center
and in that case if you're going to use the commercially available glue-on points with the
standard five degree taper you'll need to plug the ends of these with a hardwood plug just like I did
in the river cane arrow making chapter. If you're going to haft a trade point or a stone point or
something like that or you know just leave them bare to use as target or small game arrows
you don't have to plug something that's hollow. Plugging them is simply to accommodate the
industry standard five degree taper so you can use glue-on target points and broadheads.
If you'd like to see a how-to for plugging a hollow arrow check out my river cane chapter
where I show the process step by step. Now comes the part of the process that makes wild shoot
arrows so much more time consuming than the other methods and that is green straightening them
every day with the bark off for 10 to 14 days. The arrow wrench is optional but I think it makes a
nicer finished product because I can get all of the little bends out. Every day after straightening
I bundle them tightly and put them in a place with good airflow. All right so after a couple of weeks
of small time commitments this is the level of straightness you can achieve from a wild shoot
and this arrow has been trained to stay straight from the day it was cut so there will be very
little warpage throughout its lifetime. Every once in a while you know with any natural material you've
got to bump them straight that's just part of the game. Everyone that shoots primitive arrows knows
that they require occasional straightening but you'll notice just like with river cane there
might be some very minor wiggles but so long as the knock lines up at the point and the shaft
spins true they will not affect the flight of the arrow at all. You've got to be reasonable
with your expectations when you're straightening natural materials but I think you'll be surprised
how straight you can get them. So I've got four Maros honeysuckle arrows here that I've been
straightening over the last couple of weeks. They're nearly identical in size with a nice taper
and they are ready to receive points, fletchings, and knocks. So I'm going to go ahead and carve
these knocks. I'll show you guys the short version. If you want to see a detailed knock carving
tutorial with a full tools breakdown check out chapter one of the series with the dowels where
I cover all of that in detail. That's it for this video guys. All that's left to do to prepare these
for fletching is to seal them. So like I did in the other videos I'm going to seal these with one
coat of teak oil per day for three days and I've been getting questions in the comments asking if
I'm going to reinforce the knocks of these arrows. Yes, reinforcing self-knocks is critical
for arrow safety and longevity no matter which material you use. So I will be reinforcing the
knocks of all the arrows made throughout this series at the same time they all receive fletching.
So I'll see you soon in chapter five where I'll cover three or four different styles of fletching.
Thanks for watching.