G Force Calibration Procedure

Hey Gospel Guitars here and in this video I'm going to show you how to calibrate the Gibson G-Force or tronical tuning system that comes on some of their more advanced guitars. So the first step you're going to do to calibrate and you're going to want to do this whenever you change your strings even if you keep the same gauge but different brands. So you want the system to be calibrated or it's not going to do its job for you. So you want to push the on button three times and then you're going to hit the left arrow once to light the cyan A. Then you're going to hit enter two times and the system is going to start flashing green. Now you want to strum with a pick not your finger because you want it to pick up all of the strings. Now I've done this a couple times and then it's going to show you a combination of red and blue LEDs. At this point it's going to start flashing red again. Mute your strings. Strum again. Okay then just strum again. You'll need to do this a couple of times. Then it's going to do this dance sequent and go to one red E lit up. Now once it gets there your system is calibrated and that's as easy as pie. So thanks for watching. If you like what I'm doing here trying to clear up some of the misnomers about the tuning system here the G-Force. I'm trying to give it a fair shake and get familiar with it enough to where I don't have to think about every single step every time I want to use it. That's going to take some time and I don't know if I'll get burnt out but in the meanwhile I'm going to do what I can to help everybody else get to use the system as I am right now. So thanks for watching. Give me a thumbs up. Subscribe. Talk to you later.