Condo Reno How to Paint Door Jambs & Baseboards for Dummies/Part 25

VideoJoeShows
86 followers
48 Video Views·Mar 16, 2026
Condo reno how to paint door jambs & baseboards for dummies Part 25 is what this DIY howto video is about. VideoJoe is getting ready to paint some door jambs & he just got done or is getting done painting the baseboards & those painting videos are included in this entire painting video series so make sure to watch this entire painting video series to learn more than just what is on this particular video...capeche? Watch & learn as VideoJoeShows you what VideoJoeKnows...Condo reno how to paint door jambs & baseboards for dummies Part 25. Nice!
Now I can cut in this paint, can't I?
To the bottom of that, to the casing,
or the cabinetry, down at the bottom of the base,
all that kind of stuff.
So everything has to be done in sequence, okay?
All right, I think that finalizes this particular video.
It's actually given me a few things to think about, too,
when I get all done.
You know, whenever you get done with the painting job,
are you really all the way done?
If you look hard enough, I'm sure you'll find
other little things that need to be touched up.
This, that, and the other thing, I saw a couple things.
I saw a couple things the other day.
I saw a big old, I saw little bolts right next to the,
right next to the electrical outlet, right here.
And I thought, you know what that is?
It's probably a sheetrock nail that's backed out,
that's puckered to sheetrock,
and if I don't scrape that off,
that nail's just gonna eventually pop the sheetrock off
and the paint off three months from now,
four months from now, and I'm gonna be fixing it then.
I'd rather fix it now.
Sure enough, there was a nail there, sheetrock nail.
So on sheetrock nails, you don't wanna just pound it in
with a hammer and call it good.
Take a nail set and actually sink it just a hair further
to make sure that it doesn't wanna come out again.
If you just pound it with a hammer flat, let's say,
and say, okay, yeah, I've dimpled in the sheetrock
from the hammer, that's not gonna come out,
and nine months from now, there's a pucker there again
because the sheetrock, because the nail
has just loosened up and come out.
How does that happen?
I have no idea, but it does.
So I put some caulking there,
and I ended up scraping something off right there.
I put a little bit of caulking there.
So see, I'm gonna have to touch things up like that still,
and there's different things like that.
After I painted the ceiling,
this ceiling with two coats of flat paint,
I noticed there was a hairline crack
where the 45-degree wall angle was up there,
and I don't know if you can see a little line along there
where I caulked it just recently.
Right in through here, I caulked it,
and it's kinda discolored.
Can you see it over here better?
That line right there, boom.
That's because that's caulking.
I've gotta get up there with my paintbrush
and flatten that out,
and look, there's another little spot there
to a little boom-boom right there that I scraped off,
and then as I was cutting in the ceiling,
look, I got the paintbrush hit right there.
I gotta touch that up.
I mean, you'll see different things
when you get done painting.
We had to put the king-size mattress up through here,
and it barely fit.
As the guys were doing it,
of course, they scraped the ceiling.
See right along in there,
and then they gouged up the ceiling
at three different spots up in here.
You can see that one little white mark right there,
and there's a couple other ones.
That's because I caulked it already.
See right in there, there was one,
and then there was another mark there.
There's, here's the other mark,
and so I've gotta cut that in and do all that.
I mean, this is good sign of workmanship
when you get all those things taken care of, okay?
And then my transition of the wall down to the ceiling,
I put some masking tape here
along the ceiling and the wall
because I didn't want to see this ceiling paint
beyond this corner of the bullnose trim.
If this was an outside corner, I could have.
That was square, but I put masking tape up there,
and see how, when I pulled the masking tape up,
it pulled up a little bit of the paint,
and the line, see right in there?
The masking tape was straight,
but because there's sheetrock spray texture
on the wall and stuff, it dipped up,
and so it looks like I still gotta do a little bit of work.
I gotta cut that in.
See how the spray texture, right there?
It doesn't, you don't get a very clean, straight line
even by putting masking tape.
The masking tape was nice and straight,
but so I'll have to cut the ceiling,
the wall paint, which is on the ceiling
for just this little section.
I'll have to cut that in.
If I screw up a little bit,
I may have to put some flat, cut in the flat paint again.
It almost looks like the flat paint.
I need to go over that
because when I put the masking tape on it
and pulled the masking tape off,
it might have discolored
and pulled a little bit of the white paint off.
See that?
All that kind of stuff.
There's some white that can be covered with the wall paint.
So there's all kinds of stuff like that.
When you see all those things, you can write them down.
I'll write them down on a punch list
because I keep thinking, oh, I'll remember that,
I'll remember that, I'll remember that,
and then you don't remember at all.
Look around this light fix, look around that sprinkler.
Do you see the remnants of the paint going around there,
almost like you can see a ring?
That's because I cut that section in with the paintbrush
because I couldn't do it with the roller.
And when I stand back here,
I can see a nice, pretty little circle around it,
almost like it needs to be tapered out further.
See there?
See that nice little ring around there?
Ring around the collar.
I gotta fix that.
And there's different things like that all over the place.
And so it just depends how particular you wanna be.
See right in here, where I cut in next to the,
this trim here, okay?
I had to cut that in with the paintbrush, okay?
But the rest of the wall was done with the roller.
And I ended up cutting it in kind of thick, didn't I?
Can you see the remnants of the cut in, right in there?
Because the light is shining on it, can you see that?
That's always gonna show up if I don't do something.
So I can take a paintbrush and kind of,
kind of blend that in a little bit
so you don't see that as much.
See that line?
So there's all kinds of stuff like that.
I'm not sure what happened to this wall.
It almost looks like I was trying to rush.
You can see, I can see right up in here,
boom, boom, boom, boom, boom, boom.
See all that?
I'm not sure if that was from me
when I was putting the paint on.
It almost looks like I didn't put enough paint on there.
And so I'm toying with the idea from that,
from the end of the wall, maybe up to here,
to repaint this wall right in here.
Now granted, when I was painting that wall,
I'm in a hallway here.
The paint extension pole was longer than the hallway.
So I had to stop and start from here down
and then from there up with the paint roller.
And I can kind of see where I stopped, see?
Along there.
And then I must've done something else.
On some other hallways, what I ended up doing
is I got the paint,
I only went from here over to about here
in any one little go.
And then when I got that section done,
I would do this with my paint roller halfway,
then with my paint roller from down there up there halfway,
then I would unscrew it off the paint pole
and then I would take it just by hand
with just the paint roller with no extension pole on it
and then go from top to bottom.
That's what I like to do.
And apparently I didn't.
I might've done that and then I think I added,
I added some extra paint when I got done with that.
Right in here, I didn't think it was gonna show,
but look at that.
It sure did, didn't it?
Looks like one spot there, one spot there,
one spot there, good Lord.
I can't leave it like that.
And so yes, I'll stick the craft paper down there
and I'll just go down with my paint roller
as low as I want.
I don't have to, I don't have to go perfectly.
In fact, I still have to cut this in down there
and then that will blend in that top
and then it will blend in right in here
and I'll just kind of taper it right in here.
You won't see it because it will be in the shade,
so to speak.
I don't think I have to go.
I may have to, I may look at this
and I may end up deciding to go above the door too
over to here and just do this one little wall section.
I can't, I can't leave that.
That's right as soon as you walk in the door.
You see that?
I mean, that's a rookie there.
I just can't leave that, okay?
So there's some tips for you when you get ready to paint,
when you get ready to do touch-up,
when you get ready to do your door frames
and all that kind of stuff.
And when you get done, you can stand back
and you can kind of take a look at your different areas
and then you can do any touch-up or any finalizations
before you put all your paint stuff in the garage
and try to hide it for next time, okay?
Well, that's it for now.
I gotta get busy.
I've got this door frame, this one door casing here
and the door jamb, I've gotta paint
just like I was explaining to you.
I did the, what did I do here?
Oh, I did this edge all the way around
and then I did the edge here
and I did this casing around
and then I ran out of paint.
I think I ended up doing this little section right there.
But now that I got a fresh gallon of paint,
that was the end of my one gallon of paint so far.
Maybe that was my second gallon of finished paint,
of finished white paint for my doors, my door casings,
my baseboard, I mean, semi-gloss paint goes a long ways.
That was my second gallon, actually,
because I had all these doors I painted too.
See?
All these doors got painted,
both sides, on the edges, everything.
Don't they look good?
I did those.
I didn't have a painter come out here.
I did those with a paintbrush and a four-inch mini roller.
Hey, I've got that on an episode.
I show you how to prep doors.
I show you how to paint doors.
I show you how to not get it
so that you build up this edge
after you put your paint on there
to make sure you don't get that.
I mean, I can put my finger on there and close my eyes
and it's the same all the way.
Oh, man.
You try that on some of your doors.
I ended up having to re-sand some of these,
well, this door here, this is a garage door.
I haven't painted this one yet,
but I did some sanding on it and I did the edges
because these are all rough and sharp
and the overage of paint was sticking out on them and stuff.
It's all nice, ready to go now, okay?
And that's kind of what you gotta do.
It's all in the prep, baby.
If you ever heard that, it's not just us.
Slap a coat of paint on there and be done.
Come on, we gotta go.
Let's go.
You said you were only gonna be here for a day
painting those doors.
What's going on?
Let's get out of here.
We gotta go to the next job.
You know, the weekend's over.
Your weekend warrior project is over.
Come on, it's time to go to work now.
All that kind of good stuff.
You can't do that when you're doing doors
and door casings and baseboards and all that.
It is all in the prep
because once you put that semi-gloss paint on,
it's gonna show everything, trust me.
It's gonna show all kinds of stuff
that you don't wanna have showing.
And then somebody's gonna say,
yeah, I told you you should've hired somebody to do that.
Maybe you don't have the money to hire somebody,
but you still want it to look good.
That's what my channel is all about.
I'm just an average Joe at all the different things.
I got over 2,000 videos on my YouTube channel
and most of those, I am doing things
and showing you things on my own
and letting you see that if I can do it,
you should be able to do the same thing
and you can kinda see how I finish things,
how I explain things, how I get things done,
how I fix things, how I do all kinds of things
that you may have thought you never could've done
or you never could've afforded,
so you never got it fixed or you could afford it
and you didn't wanna spend an arm and a leg
for an electrician to come out
to replace a light switch for 125 bucks.
But you never knew how to do it
or an electrical outlet you were having issues with.
I don't wanna call an electrician.
Last time I called an electricity call,
he charged me $95 before he even put his foot
in the door of the house
and now he wants 65 more dollars, $150?
And what did he do?
He installed two new plugs for me?
Come on.
So hey, check my YouTube station out.
Check all the episodes for this condo renovation
and hey, if you need more help on other things
that I don't show on the condo renovation,
go to my YouTube main channel page,
go to playlists, click on playlists and have at it.
I got over 50 categories and like electrical,
if you wanna know something about electrical,
go to my electrical playlist
and every YouTube video that I posted
on this YouTube channel will be under electrical know-how
or the playlist titled electrical something.
And then I got painting, painting ones,
I got all kinds of them, okay?
So all you gotta do is let your fingers do the walking,
grab a bowl of popcorn, get in your easy chair
and have at it.
All right, it's time for me to go to work.
