Making a Foam Shield feat. Diego of the Chosen

Shielded Dynasty Network
2 followers
7 Video Views·Mar 16, 2026
Howdy, this is Diego. I'm trying to do a class or just a little video to show how to make a shield.
I don't have a script. I really haven't thought about this this much. I'm just basically grabbing
a bunch of stuff and trying to show how to do it. Fred Schuyler is taping this for me or
not taping anymore, recording it and he's going to edit it after this and hopefully it's going
to look a lot better than my first. So this is the shield as it is all put together. You can
see it's got a nice little strap in here and a little handle and it's a nice size medium round.
There we go. I like it. Now to build this, I'm going to show some of the materials you need to
have to be able to do this. First of all, if you're wondering what kind of disc to use, we are using
a toboggan. This is Avalanche brand. Avalanche brand is available through Big Five. If you've
got a Big Five next to you, great. If you don't, yeah sorry they don't ship. So you're probably
going to have to find a friend to get it for you. The worst thing about this is that it's seasonal.
There's only one place in all of the United States that has it year-round and that's in Alamogordo.
Every other place, they only have it during the winter season so you're going to have to wait
for it to become available. However, I do like these. They're not particularly strong. You can
see they got quite a bit of give to them. The reason why I like them is because they're round
right here and anybody who's ever built a shield before already knows that shields tend to crack.
They're not forever. They just don't live very long and if you've got a corner here, most shield
companies or most toboggan companies, sorry, are going to have little straight corners, little edges
or hand holes and that's usually where you're going to get a crack and that crack will almost
always start up here and come down. Because this is round, it tends to crack a lot less. So the
lifespan on these things ranges from about five to seven years. I would say that's the average.
So that's why I like Avalanche brand and it will firm up. Don't worry, it's not going to stay this
loose. Beyond that, you're going to go ahead and need some of this right here. This is 1900
EC foam. You can buy this in Austin. You can buy it at Polyplastics. I've noted that a lot of big
cities, they do have plastic or foam fabrication places. So if you have one near you, order it.
If not, come to a place like Austin or I know San Antonio has it. Lots of places where it is
available. Typically, they will have a minimum order. That's the only bad thing and they do that
because obviously people like us have gone by to go buy their stuff and they're tired of
piecemealing it out. So for me in Austin, Polyplastics requires a $100 minimum order,
which is enough to get what you need. I only have two sizes here, a half inch and a full inch.
Then over here, a couple of other things you're going to need. I got here a nice little trowel.
We don't really need the trowel. In fact, we're going to get rid of this. This is what we need.
This handle is pretty cool. If you've got a better handle, you've got a better handle. I'm
not telling you you have to use these. I'm going to tell you that you're going to replace the
screws that are on here. The screws that come on here are very small. They're only meant to
keep this little blade on. You're going to need to get a number eight by one and a quarter inch
screw. You can see that it's a flat head right here. That means it's rounded on the top and
it's flat on the bottom. So that's important to have. Over here, you need some nuts and bolts.
Typically, you're going to need... The sizes that I like to use is one quarter inch.
It's about three quarters to one inch long, whatever your preference is. I've got two
different size washers, a very large one for the outside, a small one for the inside,
a quarter inch hex nut, and of course, a lock washer. Lock washers are great. I mean,
they're really good. It's a good way to make sure that your screws never come undone or very rarely
ever come undone. I always recommend having lots and lots and lots of utility blades.
When you're cutting foam, most people are going to tell you you want a serrated blade and they
are the best. I mean, they cut really well. I've just always been a stickler for the straight
blade. I just like utility blades. I don't know why. Preference, maybe because I'm Mexican,
but I really like these a lot. So they're great. Any kind of measuring tool, I have this little
L-shaped ruler, but you can get anything. I've also got these larger ones up here. You will
probably need them. This right here is one of the more important tools that I have. It's a rasp
and it's made for wood, but I use it for foam. Because it has all these little cutting tools
right here, like a grater, it's really great for being able to take away foam. That's important
because if you want to do this precisely, you're going to want to make too much foam. You don't
always take foam away. It's very hard to put foam on. Of course, your standard tools. You got to
have a Phillips head screwdriver. If you want to have utility blades, duct tape. This right here
is contact cement. You got to get the big one. As much glue as this is, this is going to make about
two shields, maybe two and a half. I don't think it'll reach the three. I think if you plan that
way, you're just going to find your project. Two inch chip brush. I remember the days when I used
to want to take foam, cut it up and say, no, I saved money. These are like a dollar and 20 cents
and they work so much better. The right tool for the right job. If you're trying to save yourself
this one was 96 cents. Yeah. This right here, we've got two little pieces of leather.
They're about a half inch thick. I just took a couple of pieces on there and I put a little
hole in it. The reason why you need this because basically you need a spacer for this when it
comes down and that's the only purpose that it really has. I actually carve a little piece of
this out of here to make a little bowl shape because when you put it inside, this is concave.
You're going to have to have one side raised and one side beveled. That's it. Then of course,
got to have markers, got to have drills, got to have a power drill, which I got back here.
Of course, you're going to have fabric or your shield cover, whatever color you want is fine.
I would not get anything stretchy. If you're thinking you're being smart, like anything's
going to stretch over this, just don't. It's a terrible idea. Don't even do it. Get something
good like a broad cloth or a, I guess what, trigger or anything like that. A heavier piece
is going to be much, much better for you. If you want to make a drawstring, that's great.
I make mine out of cloth. Honestly, that's not the best way to do it. The best way to do it is
probably get some kind of paracord. That's a lot better. It'll last you years. It's really good
stuff. Of course, you want these other little pieces. These are other pieces that are going
to go around here and I'll tell you what they are. They're basically just a half inch and a
one inch cut up into special pieces that are going to go around or inside the shield. These
are the pieces that are going to come on this side to make up the little space that you're
going to have here. Of course, the patterns. You need to have these patterns to be able to do this.
This one right here, just measure the shape with your mold right here and you can make this
or don't use it. That's fine. I mean, everybody has their own way of building up the space.
The only thing I would recommend not using is that fill up spray stuff. Absolutely awful.
Don't use it. That stuff is not meant to take pressure. It's not meant to take a beating.
If you use it, it's probably going to get pulverized into powder and over time it's just going to go
down. Of course, these little bad boys. You need these to measure all of these pieces out.
If you want to know what the magical measurements are, there is no magical measurement.
Circle is 360 degrees. If you quarter it, 90 degrees. If you eighth it, it's 45. There you go.
If you want to know how long these little bad boys are, it's roughly 13 and a half inches.
There's no need to be especially careful, but that's the measurement.
The first step is, out here on the outside, we're not really going to do much. The first thing we're
going to do is we're going to start out in here where your hand is going to go. Now, I've got
this little piece of foam. It's brand new. I've actually never used this one before. I used to use
one quarter inch EC, but they don't really make it with the skin anymore. Now, I switched to this
stuff. It's some kind of gator material that they had extra and they just gave it to me. I took it.
I don't even know what to call it. It's pretty neat stuff. I imagine this is a lot like sport foam.
Now, the reason why I have this, and again, it's not necessarily for your shield, but
I did this just because I wanted to be able to have a little buffer, something that's not going
to scrape up your hand rubbing against this plastic. It's not especially sharp. It's just
a comfort thing. I'm basically going to fold this in half. Then there's a little dot right here in
the very middle. I'm just going to find that middle spot, push it down against this foam,
and that should tell me exactly where that thing is going to go. Then after that, I'm going to put
this here, right there. Then I'm going to open it up. This is about where I want the foam to go
because I'm going to be holding the shield this way. All I'm going to do is draw this shape
onto the inside, just like so, and there. Now, you might be wondering why in the world I don't go
this way from here to here. I've got this thing tilted a little bit, and there's a really good
reason for that. Some people like to hang your shields very high. Some people like them low.
I always put it right in the middle. I don't put the handle here, not because of space.
If you're going to get hit by anybody, typically you're going to take a lot of
side shots. You're going to get a lot of hits coming this way. This is not the strongest place
for this thing to be. You really don't want to get hit here because there's a lot of plastic.
Typically, we make this thing go up. It goes just a little bit up. If I were to go the other way to
make it go down, then this little piece right here would be running into my shoulder, and so
that would be uncomfortable. The only way left, the best possible of all options, is to go this
way. It's just a little bit off. After that, this is a good little tutorial on how to use contact
cement. If you've never used contact cement, it's good stuff. It smells awful. Please make sure
that you're outside. I don't even care if you've got a big house or a good ventilation system.
You really want to be outside. Right now, I can smell it, and it's really strong.
A little strong. It's pretty strong. Luckily, I've been using this for a long time. It's no big deal.
Now, the way contact cement works is really simple. This brush is amazing. It's always going
to be great. All you have to do is put it on one surface, whichever surface you're going to use.
I personally know that this stuff does not stick real well in plastic. You're going to find that
out. You might get a little frustrated as you're sitting there trying to make it adhere to plastic.
It just doesn't do it. Plastic will typically resist any kind of petroleum glue, but it will
stick, and this stuff will stick very well to other pieces of foam. However, we're talking about
Amcard. You're really not going to be testing very much how much force this foam can take against
plastic, so you really will never have to worry about it coming off. It's just not going to happen
if that's what you're worried about. Don't even think about it. A little two or three pounds
of pressure they can take per square inch is going to do nothing. I put a thin layer on here.
Next, I'll grab this thing, put it in here, and then that's the most exciting part. After that,
you're going to wait about 15 minutes. Both sides have to get, or both these surfaces have to be
pretty dry, and that's the only way that these things actually stick together. If you put them
on before that, it will stick, but not as well. Certainly not as strong, so be patient. The
exciting part is done now. Nice and tacky. You can feel that it's a little rubbery feeling.
This is a little rubbery feeling, but it's not actually sticking your fingers. It's not coming
off in here, so that's where you want it to be. Now, let's put this on here. We already drew that
little rectangle, so you've got to be careful here. If you make a mistake, it's really hard
to rip this off. There, there, there, and as you can see, nice and strong, really good grip.
You can force it off, but there's no need. You can see that it sticks right back together.
This stuff is actually really forgiving within the first couple of minutes. After it's set,
yeah, that's it. Pretty permanent. Okay, after that, we want to put the handle on here.
So, figure out where you want your hand to be. That's where I want mine. So, after I have this,
I put the screws on here on purpose because I want to be able to mark where I need to
put these little screws. So, I'm going to go right here, come over here,
and try to line this up as evenly as you can. You'll have to have kind of a good eye for this.
Right here and about right there. Again, it's not perfect. As one of my squires once said,
we ain't making pianos here, so it's good enough for government work. After that,
get your nice little screw and go to town on it. Normally, I would do this on a block of wood
because you always want to have something behind it. There we go. And there we go.
So, that's already done. Now, you might remember this little bad boy, which is where
this basically comes out of. This is the, I guess, the trowel that's used. You can find it at Home
Depot over by the, I guess, what, the flooring department. And you just take out the two little
screws, get rid of them, and you're going to use these bad boys. Now, you don't actually have to
cut this thing out. I do because the smaller this little metal is, the easier it is to curve. You
will have to pound it a little bit flat here. I just cut it using aviation shears. If you don't
have them, you should. They're great tools. But they're really forgiving. I mean, they'll cut
through this metal like it's nothing. And it doesn't even have to be perfect. Like I said,
just thin it up so you can put a nice little curve on it. And it doesn't really matter how curved it
is. Just make sure it's nice and even, especially here on the ends. It's very easy to put this on
here and bend it down. That's a lot easier than you're trying to take it flat and make it curve
after you put the little screws on. It's a terrible idea. So then after that, turn this over, put this
about where it needs to go. Find little holes out here. Hopefully, they line up. They don't always,
but this one does. And so I'm in fairly good shape. Okay. If you really want to tape it,
it's not necessary. Once you put on the screws, it's not even important. In fact,
it's probably going to pull this thing up. I just don't want it to move around. I want
to stay in the same place. So right there is good enough. When I'm ready for it,
I'll just put it back down. Get in there, you little thing. All right. Then on the other side,
on the other side, I've already taken this leather, the two little pieces, and I've glued
them together. And I put the little hole there. Figuring out where the hole is, that's up to you.
I mean, you can see mine has a lot of space. The most important thing here,
just making sure that you've got this little bevel here on the side, because when this thing
goes in, you want this thing to be able to sit more or less straight. It doesn't have to be
perfect, but some kind of a bevel is going to help. So right there, there, everything should
be pretty set up. We're going to start coming from the outside and we're going to come in.
So I can put this little bevel in here. Put this little thing. It's too dark. Yeah. Sorry
if it's a little too dark for the camera. Get over here. And there. And over here.
Yeah. Like I said, these screws right here are not the ones that came with this. They actually
belong to their number eights by one and one quarter. I don't even know if these are exactly
that. When you work on a lot of stuff at home, when you do a lot of home improvement, you usually
get a lot of extra nuts and bolts and screws in some of your curtain kits and whatever. I just
keep them. And so whenever one of them becomes useful, I put it in. I'm going to stick this
thing in here, start putting it through the leather. Okay. It'll sort of come out. So I've
got these two little pieces now sticking out of here. Not going perfectly straight, but they're
pretty good. Now, this is the part that you kind of got to be careful with. This is Loctite super
glue and it's good stuff. The bad thing about it is it sets up pretty quick. You got a timetable
about 15, 20 seconds after that thing has been hardened and it's going to be there forever.
I used to not use this. And over time, these screws would slowly begin to unthread themselves.
So there is a way to tighten it back up. You have to go through all the foam with a
Phillips head screwdriver, hunch around for this thing and put it back in,
which is a real chore. It's not easy. So this helps to correct that problem. Never let go.
So I basically just put it in here, put a few dots, put a few dots, put it on here,
and now we're under the gun. Now we got to move this fairly quickly. I still like doing this by
hand. I still don't want to grab the electric drill and go town on this. I just put in a little
bit there, put it in a little bit here, and that's pretty much it. You're just going to hold this
thing and get it down to where it's fairly tight. The first one's not going to be too bad
because it's still fairly fresh. There. This one, I hope not too much time has passed. We'll see.
All right. But it'll be a little harder for sure. And it doesn't matter if the leather goes on top
of this little cloth thing, this little foam thing or not. Now you're going to see, probably
not on the inside, but on the outside, especially since we got this metal next to it, no matter how
well you plan this thing, there's going to be a little bit of distortion here on the plastic.
And that's just going to happen. Don't worry about it. It's never going to do anything.
And yeah, you want this nice and tight. You should be able to hold this thing and be able to
manipulate it from here. That's done. Okay. Okay. So now we got this handle put together
nice and strong. It's not going anywhere. So now it's time for the strap. Now you don't need a
I really don't charge for this. It's just fun for me to do. But if you just got a piece of leather,
I've seen some people use belts, whatever. Just make sure that of course it fits on your arm.
That's the penultimate thing. If you can't do that, then it's pointless. After you've got these
holes put on there, these holes, I made them a quarter inch so they match and align on the holes.
Just grab this thing, put it on, put it here, make sure it fits nice and good. After that,
you're going to go ahead and get a marker and you're just going to mark your holes here,
here, here, and here. I've already got holes there because Scott already uses his arm to
mark these. So this is pretty much where they're going to be. After which,
get a quarter inch drill bit and just, if we did everything right, then these things should line up.
Oh yeah. Beautiful. Look at that. And beautimous. Okay. Now to put the bolts in,
you need the largest washer. That's the one that's going to go outside and you want to clear
all this junk away. If you've got any little shreds in here, get rid of that. It should fit
relatively well right here. With the leather, even if you've got the hole right, you're probably
going to have to thread this thing. It's just one of the properties of leather, it shrinks,
it does all that kind of crazy stuff. So just let it go all the way through. There we go.
Then after that, you get your small washer. After that, you get your lock washer. And then after
that, of course, you get your hex nut right here. And then after that, you just put it all together.
So you can see that's more than enough. I'm not going to make you wait through the whole thing.
We'll just say this one's done and we'll get the other one. Okay. So as you can see,
now I got this piece all put on, all our four bolts are on. It fits pretty well. It's rock
solid. It's not going anywhere. It covers up this. We're still going to add a little more
thickness here, so don't worry if you're like, oh no, it doesn't cover up my shoulder. It will.
All right, now we go back to the outside. So we're at this point now where we're going to start
putting the bolt on. This little button right here, this little dot is really important. You
need to know where the middle is at all times. Now, I don't know what your preference is going
to be, but I'd like to know exactly how this is going to be on here, where all these are supposed
to go. So with a marker, you're going to come in here and mark all these little eighths. It's
going to be making a pie piece. And if you're curious why in the world I make pie pieces in
the first place, it's real simple. If you could go out there and buy a piece of one inch, 1900 EC,
you just cut out a circle and put it on there and it would work. It would. The point is if you do
that, you're going to be having so much waste. It really is quite a bit of waste. So much of that
foam is going to be useless except for maybe tip covers or something like that. If you do it the
way that I'm doing it, you're basically utilizing a lot more of the foam. So with one sheet of
four by eight foam, you can pull about five shields out of there and that's pretty good.
So that's why we're doing it this way. It seems like a lot of extra work and it is,
but again, we're trying to conserve some of the material we have here. So I'm going to take this,
put it on here, wrap it around. One thing that's really important to note is that as you are
marking this stuff out, you are definitely, definitely, definitely not going to get this
thing to go here, here, here, here, and line up here at the very end. You're always going to be
a little bit short. That's always going to happen. You didn't do anything wrong. We're
talking about putting something that is two dimensional on something that is three dimensional
and hoping that it all goes to plan. I said that never works. So typically I do one pie piece.
After that, I just get my little straight edge here and I know that this is the correct
measurement. This is a straight line going all the way across. So if I'm going to mess up,
I'm only going to mess up a small degree. So that's going to come over here and I make one
straight line going all the way across and now I'll start building the opposite way and if I
overlap, that's fine. I want to maintain this nice little straight line over here. It doesn't even
matter if I keep my straight line. So that goes over here. Good. Now I'll come over here,
see what I can do. There's my straight line right there. Come over here and try to measure this
thing out and then hopefully over here it's not too incredibly bad. We'll see. You can go here,
the other side, whatever. Happened to make it straight perfect on the very first try.
You'll see right here, right there, there's a little bit of a mistake. See there's some
overlap. So I'm going to put this over here and this is going to be my little margin for error
and everybody's got a little margin. Just know where it is. Okay. You know that this is your
good one. Make sure you know where your good one is. Make sure you know where you've got your play
and that's about it. So we're going to finish marking. So we've marked this out and you can
see it's still got this little error. Most of this other side came out okay, but this is going
to be a little fudge factor right here. Something we're going to mess up on. So we have that mark.
Now we need to fill in these spots. You can do that any way you want to. If you want to,
you can get just little pieces of foam and start building it up. Like I said,
the only thing I don't recommend is trying to use that spray foam. That spray foam is just
junk. Just throw it away and use it for what it's supposed to be used for, which is insulation.
Not for this. Now this is just a little handheld thing that I made that's going to counter gear
and if you can find a stiff piece of plastic, you can tape that down. That would build purpose,
but I don't have that. So I went ahead and made a little piece of foam. The reason why they're so
messed up is because I cut them out to look like this and then I came over here to my bandsaw
and I went ahead and had to chop it up. It has to be beveled quite a bit on all the edges to be
in there correctly and it's a fairly dangerous process to do. I mean, you have to get your
fingers really close. I wouldn't recommend it to anyone. In fact, I'm so much not recommending
you do that that I'm not even going to show you how to do it. It's really, really bad.
Probably you need to just shave it or use a little rasp to try and carve it down. Whatever
you have to do, just put a little bit of a bevel on all the sides here so that hopefully it will
fit here relatively evenly and it doesn't even have to close. It doesn't have to be perfect.
All you need to do is just fill in that gap. So this one already is. So what I'm going to do now
is contact cement and I'll even put some tape on the inside to make sure that that lays down
and since I'm putting tape there, cosmetically I don't have to worry about whether this thing
matches up or lines up or not and it wouldn't matter even then because we're going to cover
that up with another layer of foam. So I'll take care of that right now. You can see I put this
little piece here. You can see some pieces sticking up and some sticking up and even though some of
you might know me and might think I would never say this, I'm saying this right now,
these little mistakes are not important. They're really not. In fact, they're expected.
They should be here. There's tape on the inside and it's not very pretty either and again something
I would almost never say is that it doesn't matter at all. We're going to cover this up.
This is just a temporary thing. Now, this is the important part. Now it's time to start putting
these little pie pieces on here. I should have eight of these. You can see some of them are
cut really well, some of them are cut kind of not so straight. Again, this part is not important.
This isn't even the outer layer. This is just the building up layer. Now, it is one inch thick
so if I just wanted to use this and that's it, that's fine. It would be half cart legal.
Now, how do I do this? Well, I'm going to get some glue and I'm going to put it basically on
the inside here and just cover it up. I'm trying not to go real fast so I don't want you to think
that I'm rushing or anything because I'm not. You want to put a nice good layer on here. It doesn't
have to be real thick but you want to make sure it covers at least the edges. That part is important.
You don't want to exige it to escape that. Also, you want to make sure that you're getting the sides
over here because all these pie pieces will be sticking to each other. One place that I learned
a long time ago not to put glue is right here. You don't. A long time ago, I tried putting glue
here and on here and this piece always got stuck and it became hard to get that all the way down
and make contact. So, don't make that mistake. You're only going to put it on three sides,
the bottom and the sides and that's it, nowhere else. So, I'm going to finish this. I'm also going
to put it all over the shield cover and we're going to fast forward ahead when I get to do that.
So, we finished putting glue all over this. We put glue on all eight of these pieces. Now,
used to be that I used to put these on one at a time and it works. I mean, it's going to work but
the good thing about using EC foam is that EC foam managed to compress quite a bit. It's
quite a bit of give to it. So, there actually was a better way to do this and I did it accidentally
which is how a lot of things get solved by putting a lot of these together. I told you at the very
beginning, if you had a circle, you could just put it on here and this is going to make a circle
and it's actually the best way to start. Basically, just take these pieces, put them together, make
sure your seam is nice and straight. I put the tacky sides up and I just join it together like
that. There you go. See? And if, see how it snaps? It will snap. Like I said, this thing is very
forgiving at the beginning. It really is. I'll just put it back together. Yeah, it's very forgiving
at the beginning and then after it stays together for a while, it's going to stick forever. So,
at the beginning, it's, you know, you can make mistakes. You can do whatever you need to. So,
at this point, all I'm going to do now is just start putting this together to make a circle
and just like with Elmer's glue and I say this because I'm an elementary art school teacher in
real life. Just like with Elmer's glue, you always want to put a little bit of pressure on this.
It's not just putting enough glue. It's actually putting a little bit of muscle behind it. So,
if you squeeze it together, compress it, that's really going to help this thing to get some
stickiness to it and you don't have to worry about it right now. I mean, it's already dry,
so it's not going to get on me which is a good thing because it can be a real mess.
So, stick this thing on. Yeah, normally, I would speed forward the time but this is actually a
very quick process and I'm not even moving it fast and it's still coming together pretty quick.
In retrospect, maybe I should have put these together first because I want to be able to fit
this in. I don't want to have a problem of this sticking to itself before I get in here. This
one's going to be pretty close here and here and then finally here. We're going to have a little
bit of a bow. Pick this thing up to make sure this thing comes together. Well, that bow is good for
us, isn't it? Yeah. So, there's that. Hopefully, this thing comes back together. If it doesn't,
again, it's not that big of a deal because this is not the top coat layer. Now, the hardest thing
to getting this over here is just making sure that it sits straight. You want this middle part
to go on the middle part there. So, that can be kind of tricky. You can use whatever it takes.
Personally, I'm just going to take it for granted that my measurements are good and I'm going to
find my good measurement. Stick this there right on this little line that we made. Stick this right
here on that line that I made and I'm going to stick it down. Down and down. That's nice. Then,
I'm going to come to the opposite. Stick this down in there and stick this down. Hopefully,
in the correct place. Yeah, I have to move it a little bit. So, some of these things, well,
that's probably a little too much. So, I'm going to move this a little bit to the side.
There. That's all good. All right. Then, after that point, we're just going to start pushing
all these pieces down and in. It'll eventually sit down, hopefully, exactly where it's supposed to.
Get all these pieces in. Get all these pieces in. Pieces in. Pieces in. Pieces in.
Then, just start shoving all the middle pieces down. As you do this, you're putting enough
pressure to force these things together. So, now this thing has been pushed down. You've
got the air pockets out. Easy to tell if there are air pockets if you're going like this. Now,
sometimes you don't know. Now, there's going to be a little bit of distortion. There always is.
Over here where the handle is, you're going to find that this part is maybe a little bit wonky.
Good enough, you're going to remember. It's no big deal. So, this is all nice and flat. You can
see that all these seams now are forcing themselves closed. They'll never separate.
That's the good thing about putting pressure on this thing is it's going to want to close.
Now, this is another part that's really extra. Normally, this would be the top layer. I like
to put another layer on top of this. Now, we're not going to do it right now. I'm going to go
ahead and make measurements for that. This is a bit longer than the other one that I had here.
All I'm going to do is put this on here. I'm going to measure the sides. It's going to be a little
bit off. I try to put it as close to the middle as I can. Really, the reason why I do this is
because I'm trying to get that seam in the middle. It doesn't have to be. I don't even know if it
adds any kind of structural integrity to it. I honestly don't. I just like to do it this way.
Since I've always done it that way, that's how I'm going to tell you to do it. So, if you don't
really want to put the top layer, then you can skip this step and just move on. If you are going
to do it, then again, just put this on here and make this in between, in between, in between,
in between. That's it. So, we'll move on to the next step. All right. So, now the next part is
we're going to put a little foam on the inside. Is it necessary? Maybe. I like to put the foam
in here because it'll do two things. First of all, having foam on the inside is always a little bit
necessary because your shoulder is going to be rubbing on this. It's nice to have a nice little
padding. Also, it's because when we put padding on the outside of this lip because you have to have
padding on the outside, it gives us another surface for the foam that's going to be on the
outside to attach to. So, I would say, yeah, it's pretty necessary. Now, to do this, I basically
took the half inch foam and I cut it down to be two inches. So, it's really not a big piece.
And then after that, I'm lucky I have a bandsaw and I could basically make a bevel coming all
the way down. So, I have a nice little bevel, 45 degree, coming all this way. Now, the first thing
you're going to want to do is you're going to have to glue this onto here. So, here's a nice
little craftsman's trick. It's not specific, I don't think, to sewing or to line making or anything.
Basically, you take this little bad boy, you put it on the edge, get your marker, you put it here,
and you basically start drawing a line. And you're just going to go ahead and follow it like so.
So, off I go. Yeah, you got to hold this down, going, going. Hold this down until you make this
all the way around. After you put this all the way around, glue, glue, and stick it down. There
are some people that try to angle this cut so that this thing lines up with itself. I think
it's a dumb idea. I really do. Because when you put this back, you want it to be straight. The
rest of this is straight. When you join it, you're going to want it to be straight like this.
So, that's it. So, I'm going to go ahead and do that. I went ahead and glued this part in here,
the bevels on the inside. And before you think, oh, well, you got to make this thing
flush with plastic on the outside. Actually, no. You want it to basically overhang a little bit.
Not a whole lot, but a little. Because if you're going to put this right here, a little piece that's
going to be rounding the edge right here, you want it to be able to attach to this more than you do
this right here. Honestly, this is a much better anchor than this. Even though this is solid,
this is what you want it to attach to. So, it's okay if it sticks out just a bit. Even right here,
we're sticking out a lot. That's pretty cool. Don't even worry about that. Again, if you have
to, this thing will compress down and it'll form a good seam so you're not in any kind of a bad
place or anything. Now, this right here, what is this? This is going to be the trim layer. It's
Now, if you are worried about this not being big enough, if this is really uneven and you have some
parts that are really thick, it is okay to make this super huge. It really is. If you want to
make it an inch and three quarter, you want to go all the way up to two inches, that's fine.
Because you can always attach this and then cut some of it out. Now, I'm just going to go ahead
and put glue here, put glue here, and then attach this around. And you might say, well,
when I put this on here, do I want to make sure that the bottom side is flush or the top side is
flush? And the answer might surprise you. You actually want to be flush on the bottom. You
don't want to flush on the top because there's another piece of foam that I'm going to put here
on the top. So again, that gives us a lot of leeway up here. So if you're going to make a mistake,
make it up here. Don't do it down here. And so I'm just going to go ahead and start gluing.
Went ahead and glued this outer piece on. And you can see the inside one is a little more really
good. When I was first putting it on, we stuck it together and it would separate just a little bit.
That's okay. You want to let it do that. You don't want to try and crimp it right away.
Join it all the way around the sides. Come all the way right here. See, this one's already coming
off. This one's coming off. After you have it all stuck, then you can come back and just
poke the heck out of this thing. Then you start putting your pressure. That pressure at the very
end will make sure that that seal is solid. It's a permanent bond. So don't worry if it doesn't
stick right away. It'll do its job. Glue knows what to do. Just give it a shot. There. Some
people like to put tape on here. It really floats your boat. Now, this is the part that I am
concerned about. So out here, you're going to notice there's some unevenness. Not because we
sized anything wrong, but just because this dome right here is going to be curving down, curving
down, curving down. And this thing is coming out at an angle. Now, honestly, that's not a real big
deal. You can just let that live. It's not a big deal. That's why I'm going to put that extra skin
on here in a second. But if it does bother you, you want this thing to be as smooth as possible,
this is where you're going to be using the raft. Anytime that you have foam that is extra,
or that is sticking out, or is bothering you, or doing something that's not supposed to do,
you can use this to really trim it out. See, like right here, I've got this little piece.
That's not enough for me to worry about. This part is sticking up. It's going to go away as
soon as I put a layer on top. But if I come out to here, this piece is sticking up. This outer
layer is sticking up. That is going to cause my top layer to kind of want to do this number at
the end. So I do want that to come down a little bit more. So I'll just take this thing and start
working it over here. And you can see it takes off a lot. You don't even need to put a lot of
pressure on it. Now, if it's true, it is going to create a rough edge. But that's really, really
inconsequential, especially since we're going to put a cloth cover on top of this. It's not going
to affect anything, the performance, either way. So if you need to, you can do this here. Usually,
I use this at the very last level. But I figured I would show it to you right now. So I'm just going
to trim this out and get started on this other layer. See, I made a mess here. And that's part
of the course. As long as you don't got these little things on your work surface. Now, I went
ahead and re-marked the middle of all these. Again, you can use the same seams. I like to
overlap it a little bit. It's my preference. Now, I'm going to go ahead and take these. These are
the half inchers. This is going to go above here. The real reason to use this, aside from making it
look nicer, is it helps to cover this outer layer right here. And that's going to make the whole
thing a lot stronger. But I'm going to follow the same steps I did before. Glue on the bottom,
glue on the sides, glue here, and just tack it down. So, excuse me while I do that. A whole
bunch of glue on here, a whole bunch of glue on here. I already got this thing put together,
so this is the tacky side. I'm going to open this up a little bit. Now, I still got pieces
that are separating. That's fine. This is the important part. This middle, that middle, and
all my little lines to show where it's going to line up. So, I'm going to make sure this middle
goes right on there the best I can. Make sure this goes on here. Make sure this goes on here.
The lines line up. That's the most important place to start. That lines up. Now, if this thing is
sticking out, no problem. We want it to stick out. That's better than anything else. So, here I am
lining these two, and I'm getting my perpendicular parts first. This one, then the next one, and then
the ones in the middle are doing exactly what they're supposed to. They're coming up. So, now
we're going to push them down right on the line. Push it down right on the line. Push it down right
on my little mark, and push it down right on my little mark. And then after that, there's no need
to be scientific about it. And past this point, now you start pressuring your seams. Start
pushing everything down. Make sure everything is joining. After this point, it's going to be stuck.
So, I'll let you pan away while I'm muscling this thing down. Okay, so at this point, we've got this
big lip sticking out of the side, which is great. It's always great to have too much than to not have
enough. So, at this point, I'm basically getting a blade. By this point, after using all this glue,
this thing's probably dull. And all I'm going to do is come over here and start cutting this.
You do not want to cut this straight up to here. You want to leave a little gap.
Never cut flush. So, I'm going to keep cutting this out, and I'll see you in a minute.
All right, so we've got this little edge sticking out after we trimmed all the sides. At this point,
all I'm going to do is come back in here and start trimming this out so that it's nice and even and
flush. You're still going to have this little rough part right here. Again, it's not a big deal.
It doesn't hurt the performance. It doesn't do anything bad to it, and you have to go slow.
If you actually put some muscle behind here, you're going to take an awful lot of meat out of
this thing. You've got to be gentle and just work it all the way around, all the way around. And by
the time you do this, you are pretty much done. Now, I'm not going to tell you how to make a
shield cover because, honestly, most people have somebody or they have a hookup or they know
somebody that they're going to go ahead and make a shield cover for them. So, I'm just going to
leave you with this right here. The finished edge works pretty good, covers up the shoulder nice and
big, and we're done.
