How To Make Cosplay Shields (Captain America's 1940's Shield)

Shielded Dynasty Network
2 followers
2 Video Views·Dec 18, 2025
Are broadheads still accurate when shot from an untuned bow? In this real-world test, Seppie Cilliers puts it to the test by shooting fixed blade broadheads without tuning his setup — and the results might surprise you.
Whether you're a bowhunter preparing for the season or just curious about how much tuning really matters, this video will give you a clear understanding of how critical tuning is for broadhead accuracy.
Hey guys, so today we're gonna make your own Captain America shield. So for last year's New Year comic-con
I went as Captain America, and I just had to make this kind of shield because I love, I love this one.
So I'm gonna run through how to make this, but first we're gonna go through all the supplies and equipment you may need.
So you got all your equipment and supplies you need to make this shield,
so let's go right into the process on how to make it exactly.
Like with any cosplay you're working on, the first thing you got to do is find a template, and where do you go to find
templates? You go on Google, and what I did for this one is I searched Captain America shield template,
and I found one as the old one, and they got the round one too. And you resize that image to be as
big as you could fit it on that acrylic sheet that you're gonna buy, and the acrylic sheet that you buy is an 18 by
24, so mine was roughly
17 and a quarter almost by 22 and a half to fit on that acrylic sheet.
So you print out the template for that size, you tape it all together, and then you cut it out.
So now you got the cut out of the shield, what you got to do is tape it to the acrylic sheet and
trace it out with a sharpie marker.
So you got your traced outline on the acrylic sheet,
the next thing you got to do is cut it with the jigsaw.
So you got to take the jigsaw blades that you purchased, maybe, or had around.
I got the ones for plexiglass, because plexiglass and the acrylic sheet are really the same thing.
So I put the plexiglass blade into the jigsaw, and I cut the outline on the acrylic sheet.
So you got your shield, but it's looking flat. What you got to do is round it out, and
to do that, you got to use a heat gun. So you heat up the center and a little bit towards the sides, and you put
it over something that's round, like maybe a folded up rug or a
sleeping bag, and you hold it down till it cools down to retain that shape.
You might have to do this a couple of times, it didn't really work for me,
but you're gonna have to be creative on what you're gonna put it on to round it out.
The next step you could do before you round out the shield, but I kind of did it afterwards, is I took a
thousand grit sandpaper, and I've smoothed out the edges.
Next is the super fun part, like I say in every cosplay tutorial I've done so far.
It's spray painting, or just painting, but this one is spray painting.
So when you spray paint, you got to make sure you have three things. These are the three most important things.
You got to have your respirator mask, so that you don't breathe in the toxins, some working goggles,
so you don't accidentally get the paint on your eyes, because that could be pretty bad, and
gardening gloves, so you don't stain your hands with the paint, which happened a ton of times, and it takes so long to get that
spray paint off your hands. Since the acrylic sheet was clear,
I thought it'd be easier to paint it all white, and I even painted the back white.
You could paint it whatever color you want that matches your cosplay, or you could match it to the movie.
Which I think might be a goldish color.
The next thing I did was decide where I wanted the blue top part to start, and I taped it off with the paint masking
tape right across the shield to separate the blue section from the stripe section. After that,
I measured out where my red stripes would evenly be, and covered the white stripes with the masking tape.
After covering up all the white and blue sections,
I've spray painted the shield red for those red stripes, and let it dry for an hour or so.
Then I took off the tape for the stripes
slowly, because the paint does peel, and it kind of bleeds into it.
You got to be careful,
and I do have to figure out a way to prevent that, and when I do, I will definitely let you guys know.
For the three stars on the top of the shield, I googled another template, searching Captain America stars, and
resized them based on how they fit on my size shield. Not sure how your bigger shield's gonna be,
but sometimes you just gotta wing it.
So I cut those stars out, and once I was satisfied with the spacing on my shield,
I used paint masking tape to tape them in place on the shield,
and then I put tape over them. The reason for this is because when you spray paint the blue,
you want to keep those stars white. Then I cut some plastic bags in half, and cover the stripe section.
So then I sprayed that section blue, and let it dry for another hour or so.
So now the spray painting's all done.
Make sure to carefully take off all the
masking tape and plastic bags, because remember, you don't want that paint to peel or bleed into each other.
After you paint, you got to seal the paint in some way, and I used a clear coat spray.
I kind of didn't use the right one, so mine peeled off in the middle of Comic Con, but that's okay.
You're gonna learn from my mistake, and find a clear coat that matches the spray paint that you used, and
that should seal the paint, and you should be good to go.
This was kind of a last-minute project to make this shield for myself for Comic Con,
so I didn't really have a clear-cut plan on how to do these straps in the back of the shield.
So I had a couple of buckles on me,
I had some straps, and I had some five-minute instant mix epoxy, and tried to glue it onto the back of this acrylic sheet.
Fortunately, the epoxy didn't hold like I thought it would, and it fell apart in the middle of Comic Con,
and I had to hold the shield in my hands instead for pictures and all that.
So I recommend figuring out your own creative way to put this strap on, but maybe you guys have a better idea.
I totally am open for suggestions.
I kind of have an idea of what I should have done, but I guess based on your own budget and time,
you'll figure out what you want to do for this part.
So you're on your way to making your own Captain America shields.
I hope this tutorial helped, and
stay tuned for our next cosplay how-to, or whatever how-to we're coming out with next.
