Accuracy- Homework for A in Archery- Week 3

The Technology of Old Crossbows
4 followers
8 Video Views·Mar 16, 2026
Accuracy- Homework for A in Archery- Week 3
Comments are disabled for this video.
The bow grip, the first thing and the last thing to determine the accuracy of that arrow.
It's the first thing to touch the bow and it's the last thing that that bow is in contact with
as that arrow is going through the system and it's leaving the hand.
Your position on the grip means everything and I posted a video about grip pressure
and grip position and how that affects your accuracy by squeezing your fingers,
what that does to the to your pin, how you aim off, putting heel pressure on,
crossing over that lifeline. I've talked about all those different variations but for this part
of our shot sequence we have to move on from focusing to our feet to focusing on that grip
position and I want to talk about this being the second step in my shot routine and exactly
what I look for and what I feel for because throughout all of my shot processes I've always
told people you have to it has to look right and it has to feel right and if either of those two
things aren't happening then we need to learn to cancel that shot. So step one was our feet.
We got our feet comfortable in the right position and we feel stable so great. Now the next thing
is my eyes will go from looking at my front toe position to then looking at my bow hand and how
I address this bow. What I'm looking for is I really want that front thumb to be at 45 degrees.
This is such a natural position and it really allows this shoulder to be in the best position
possible later on. If we start to turn that thumb up it's going to contact the riser and our bow is
going to want to lean this way. If we go too far out and put too much pressure on the thumb we're
now applying pressure to the top of the riser with our index knuckle and that can start to do
the exact opposite. It'll start tipping it the other way. If sometimes our hand is forward and
then the next time we're all the way back and heeling the bow those are also variations that
are going to completely change your accuracy. So what I want is I want you to look at your bow. You
tell your bow to to stop. That thumb is at a 45 and these knuckles here are going to be at a 45 too
and then I slide that thumb up until it contacts the bottom of the shelf and then I relax this
wrist back so that I have even pressure from the saddle right down to the pad of my thumb.
Now what's important about this is when you take your hand and you squeeze it and you see this
lifeline right here your grip should not cross that lifeline over to the opposite side of your
hand. You really need to keep the grip on the pad of the thumb and on the thumb side of that
lifeline. So the two things that I look for is am I in the saddle and is my wrist relaxed back
and is my thumb position correct where that pressure is even from the saddle to the bottom
of the pad where that is now connecting through the arm the elbow and into the shoulder and our
stability is going to be great. The other thing that's important when you relax that wrist back
and you're not in a high wrist or too low of a wrist you can be too low of a wrist but when
you're in that natural relaxed back position your draw length is always going to be the same
because if you think about it we really want our our draw length to always feel the same and if
we're high wrist one time well now this draw length is going to feel short so I'm going to
end up either going forward to it in this or I'm going to end up having to bend my arm or bring my
elbow or my shoulder up in order to be in this position. So by relaxing that hand back and making
sure that pressure is even from the saddle to the pad now our draw length can be consistent and
repeatable every single time. So when I look down I look at look for the 45 slide my bow till it
hits the bottom of that shelf I relax that wrist back so I feel the pressure even all the way
through I don't feel pressure across to the opposite side of the pad it's at the base of
the thumb pad and from there I can raise that bow and my grip is in that position and that's where
it needs to stay. Don't change your grip into a correct position once you're at full draw.
A lot of people grab this bow they pull back with a lot of tension and then they try to relax it
once they're at full draw. You're already adding torque and you're decreasing accuracy by doing
that. The more your grip can stay the same from the beginning of the shot until that arrow clears
the more accurate you are going to be. So to give you a quick rundown of what I want you to work on
and what you need to do when it comes to grip position during your shot process right here
I'm looking down at my feet putting my release on the string now that I've got this release holding
my string I have a free and relaxed hand to where I can get my thumb angle correct
I can find the saddle slide up lean that wrist back onto the pad and now my grip is exactly how
I need it to be and I can draw and make my shot with the arrow leaving this bow without any type
of dictation from torque that you've applied to the system focus on a completely free bow hand
tell it to stop lean back for even pressure maintain that torque free grip throughout the
entire cycle don't grab the bow during the draw don't grab the bow after the shot relax that wrist
back let your anatomy support that system and let the fingers feel free
