Applying a 2nd coat of paint to baseboards

VideoJoeKnows
63 followers
3 Video Views·Mar 8, 2026
http://www.VideoJoeKnows.com Applying a 2nd coat of paint to baseboards is easy...when you know how. Joe is just
about ready for the next step to his flooring project but first he has to apply a 2nd coat of paint to his base
boards in the hallway. Painting baseboards is easy & you don't need to pay a painter to paint your baseboards either.
Don't pay someone else when you can do it yourself Joe always says & that goes for painting baseboards too! painting
baseboards can be done in a snap & they will look good when you get done too. The more painting you do the better
you'll get. That's just how it works so apply that 2nd coat of paint to your baseboards & get in some more practice!
http://www.VideoJoeKnows.com
All right, I'll show you this. I'm putting, getting ready to do a second coat. You probably
wanted to see how well this paintbrush did. I've got it all wrapped with my plastic.
Give this a little bit of a stir. This paint has only been sitting for about an hour or so.
Okay, you see there it's still all nice and wet and this paintbrush is ready to go some more.
It's still, it's, it's almost like didn't even stop painting with it. Okay, so that's,
that's how you can do it on yours. Let's say, then I didn't have to rinse it out. Who wants
to rinse their paintbrush out an extra time, let's say, or, or if you're just going to eat lunch
or a break or whatever, you don't want to have to keep washing that out.
It's a waste of water. Plus, where's your paint going to go? Down the, down the drain.
And so this way it saves on all that. Okay, all right, so just keep at it.
This baseboard is going to look all nice and fresh, ready to dry, and then I can put that
blue masking tape on it. Why are we putting that blue masking tape on there? Because this floor
here, I'm going to install some resurfacing material and I've got to run some blue masking
tape to protect the baseboard because I don't want it to get all on the baseboard. Can you
imagine if it gets on the baseboard? Then I have to clean the baseboard off and then I have to cut
or if all of it doesn't come out, then over the stained concrete floor, I have to cut,
cut in this paint. And that's not, that's not impossible, but see how much easier it is to do
it right now? And I don't have to worry about getting it on the floor. Dip and go, that's all
just using an inch, inch and a half paintbrush.
What if I do too good of a job? They might not want to sell this house.
See, all this was painted before with the same color, so I'm just blending in the bottom where
it was missing from before, and I can continue it up a little bit.
But this was painted fairly recent, so I shouldn't have to blend in too far,
but like this base, since the wall's painted the same color,
the same paint, it doesn't matter if I get a little bit on the wall.
Just think what kind of paint you're using, if it blends in, and then you have to make a decision.
If this paint was a different color on the wall, then maybe you'd have to be real careful when you
cut it in, or maybe you shouldn't cut in the top edge of the base if you don't feel comfortable
enough about cutting in a straight line, let's say. There's no way I could do it this quick
if I already had the flooring material down, my feather edge, it's going to look like concrete.
I'd be faced with a dilemma on how to get that paint on there without hitting the floor.
Okay, so keep at it. I know you can do it.
