A 1955 Logan 6560 lathe. A 1985 Series 1 Bridgeport milling machine. And a versatile SIPP drill press that came from a paper mill... Hiltz Machine Works has quite an impressive collection of vintage machines.
In this shop tour, Jeremy Hiltz, Owner and Operator of Hiltz Machine Works, takes us through his manual machine shop to showcase his vintage machines and explain how he uses them in his shop.
Located in Cary, Maine, Hiltz Machine Works is a one-man, fully equipped manual machine shop focused on repair work, Powersports applications, short-run production and niche machining.
Do you want to take Practical Machinist for a tour around your shop? Drop a comment below or contact us via email at info@practicalmachinist, and we will arrange it!
Stay tuned for more machining videos!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Practical Machinist is the largest and most engaged #metalworking community across the web. With more than 160,000 registered members and 400,000+ social media followers, Practical Machinist is the easiest way to learn new techniques, get answers quickly, and discuss common challenges with your peers. Visit Practical Machinist today to join the community and start connecting with your peers.
Hey everybody, thank you for watching this Practical Machinist shop tour.
I'm Jeremy Hiltz and I'm the owner of Hiltz Machine Works in Cary, Maine.
So before we get started, I just want to thank Practical Machinists for featuring my shop,
Hiltz Machine Works, on their YouTube channel. I've watched all the other shop tours and it's
been really fun to see what other people are doing in the industry. So a little bit about myself,
I grew up around machining. My dad was a tool and die machinist. In high school I went to a
precision machining vocational program and after that I graduated in 2003 from Central
Maine Technical College's precision machining program. I also apprenticed under a good friend
of mine, Steve Daniel, at Daniel's Machine Shop in Augusta, Maine and that's really where I learned
all the foundations of this trade. My wife and I moved to Aroostook County eight years ago.
We bought a 40-acre homestead here and the goal was always to be able to work from home
on our property. So I started machining out of my attached garage and just picked up jobs here and
there and began to grow a business. And I put up this building two years ago, expanded to what
we're going to see today. I focus on three areas at Hiltz Machine Works. The first is in the repair
work industry. Cary, Maine has only 200 full-time residents and I live in the largest county east
of the Mississippi. There's only 60,000 people who live here so it's a very sparsely populated area.
However, Aroostook County is big farm country. There are potato farms everywhere and there's
also a big forest products industry all throughout Aroostook County. So there's a big need for repair
work. That's my number one source of jobs here at Hiltz Machine Works. Second is in the power
sports applications. ATVs, snowmobiles, side-by-sides, all kinds of recreational vehicles. There's over
2,000 miles of trails in Aroostook County alone and it draws people from all over the world to
come here and recreate. So I focus on that industry. And then thirdly, what started off
as a hobby for me when I was just a teenager, air-cooled Volkswagen, has been something that
I've targeted as a business. And they always say you should take your hobbies and turn them into
businesses and that's what I tried to do. Now that you know a little bit about my background,
let's start by taking a look in the shop and we'll take a look at all the machines that I have
and you can see some things that I've been doing. As we head over to the machines, remember you can
contact me at any time at hiltsmachine.com. I'm also on LinkedIn, Facebook, and Instagram.
And I have a YouTube channel, Main Machinist. I encourage you to go there
and subscribe to see what we're doing here in the shop and on some personal projects.
Why don't we start right here? This is my 1955 Logan 6560 lathe and this is the main lathe that
I use here at Hilts Machine Works. I have a lot of accessories for this lathe. I have a variety
of chucks for the lathe. I have a drive plate. I have a large face plate for the lathe. I have a
5C collar closer that's original to the lathe, steady rests and things like that. So it's pretty
well tooled up and I find that it is a very well-built lathe. It weighs over a ton. It is
a lot beefier than a lot of the imports that I have seen for sale nowadays and it has a variable
speed drive which is pretty neat for an older machine. I'll show you a picture on the screen
of what this lathe looked like the day that I brought it home and you can see what it looks
like now. I completely disassembled this lathe, inspected everything, painted it, replaced anything
that was worn, went through the headstock and put it back into service. So this is a machine that
you'd see me work running most days of the week in my shop. I do have another Logan lathe that
we'll see in a moment, a smaller one, and one of the cool things about these lathes is they both
have the same spindle, a two and a quarter, eight spindle and I can use some of the accessories
between the machines which cut down a lot on tooling costs. So you can see this is a very
nice machine. It looks clean now. It looked a lot rougher when I got it but it produces good work for
me and I'm very happy with it. I have a DRO Pro's digital readout that I installed on it and I've
also found that to be a good readout for the price. This is my 1985 Series 1 Bridgeport Milling
Machine. This is the only knee mill that I have currently at Hill's Machine Works, although I'm
thinking about adding another one soon because of business growing. I use this machine for just
about everything that I do here. I bore cylinders on this for ATV, snowmobile, small engine stuff
and then I finish hone it on the sun and honing machine that you'll see in a few moments. I have
a lot of cool tooling for this machine including a Wahlhaupter automatic boring and facing head
which I use on air-cooled Volkswagen cylinder heads and for other tasks and I'll show you that
in just a moment. But one of the things I found profitable here for me at Hill's Machine Works
is repair work for the hobby and home machinist markets and you can see here a video now that's
playing of me using the Wahlhaupter head to modify a lathe faceplate for a customer and I found that
a lot of people in the hobby and home world are buying machine tools bringing them home and then
they find out that there's problems with the machine that they weren't able to evaluate before
they purchased it and they're in over their head and they need repair work done to the machine.
One of the customers that I built a relationship with recently sent me the entire cross slide from
their lathe and I did some repair work on that. I was able to make a replacement part and I sent
it back to them. So there's a lot of work out there for repair work industry within machine
tools themselves as more and more people have a renewed interest in manual machining. This is the
Wahlhaupter UPA3 that I mentioned a moment ago and if you're not familiar with these these are
really just an awesome accessory for your bridge board or other knee mill and what this is is like
regular boring head you can actually use it as a boring head or by holding the control ring here
you can have the head move out radially to face off work or to cut internal features like an o-ring
groove or snap ring or anything like that. If you're using it on a horizontal boring mill you
can actually thread with it and do other things. I don't have a horizontal boring mill here
but a good friend of mine does at another shop and it's amazing what can be done with these
kind of heads. This is something that some of you might find interesting this is a Peter Wright
anvil that I got from a farm here in Maine near my house and this anvil had been on the farm
at least back until the late 1800s possibly a Civil War era Peter Wright. I haven't been able to
confirm that or not obviously it's not a machine tool but I do use it to drive out pins or to drive
in pins and do other things that are related to the repair work that I do here thought you might
find that interesting. So this is my Rhodes number seven seven inch stroke shaper obviously it's a
very small machine it is something I picked up because I really wanted to teach myself
how to operate shapers. I've had an interest in shapers since the late 90s early 2000s when I was
introduced to shapers at a shop that I was working at after high school eventually when I was able to
build the shop I found this on marketplace and picked it up. Now they say you can make anything
on a shaper but money but that is not true this little seven inch stroke shaper has actually made
me quite a bit of money here at Hills Machine Works for a variety of projects what I've used it
for is the repair of gears that I've had come into the shop from the farm industry and remarkably
from a much more modern piece of equipment during the pandemic they had a supply chain issue and a
customer wasn't able to get a gear it's a regular spur gear and I had a couple of teeth that had
broken off of it and I was able to weld those back up and then shape the profile back using this
small little seven inch shaper so it's come in very handy for certain jobs who come through the
door here something that kind of surprised me because I thought it was just going to be kind
of a fun thing to have in the shop and all that but one of the other things I like about the shaper
is the tooling cost is essentially zero I have plenty of high speed steel blanks and I can grind
my own tools like with the gear I just ground a tool to match the profile and I was able to index
it using a small setup piece that I have that's obviously not on here right now and fix that gear
so I was I'm glad that I made this purchase and it's always cool to to get to use it sometimes
when I'm using another machine if I'm just squaring up a block or something I'll just let
the shaper do it in the background while I'm running the bridge for or one of the lays or
maybe the honing machine or whatever it is that I'm working on so I thought you'd like to see it
let's just take a little bit closer look around because I know people are interested in these
machines you can see how the crank mechanism works here on the shaper pretty cool and of course this
is an old flat belt machine do not have guards on it I'm the only guy that works here so I'm not
really worried about you know certain regulations it's very fun just to watch it in operation
this machine here is a steinl sh4 horizontal milling machine that's made in Germany
I've had this machine under power in the past right now I'm doing a repair on it
but it really is just a very nice machine operation is very smooth very high quality
build on a smaller horizontal mill weighs just over a thousand pounds and the problem that I
have with it right now is the it's got a four-way drum switch that controls the speeds and that
broke and I've had a hard time sourcing one I'm going to get probably a universal one and
rewire this machine to use unfortunately I can't show it to you under operation today
but it's a nice machine made in western Germany so this is my welding area at
Hills Machine Works and I do a lot of welding related to the repair work industry as previously
mentioned that really is my target customer doing repair work I'm in big farm country
so you can imagine there's a lot of welding jobs that can get done there I'll show you on the
screen of a intake manifold that I welded up with my TIG welder I had an ear broken off an
aluminum intake manifold I was able to build that up and repair that I've done a lot of welding
on some heavy equipment stuff that customers have brought in and even some molding equipment
and things like that that are related to the farm industry so what I have for machines you can see
here I have a Lincoln AC 225 welder I have a Lincoln 180 Promig and I have an Alpha TIG
201 XD TIG machine I also have a budget plasma cutter which actually has worked for me
quite well but most of the welding that I do is either being used by the TIG machine or the MIG
machine I fabricated a winch mount for the front of their pickup truck they're a professional
trapper here in northern Maine and they needed that made so I get a lot of custom work that
comes in for smaller fabrication projects I made this stand here from a sprocket that came from a
forest products mill in my area and this is for obviously holding stuff that's not going to take
a lot of torque or wrestling with and I have a larger setup outside that I can hold things in
with another old blacksmith leg vise as part of my welding and fabrication area I do have a drill
press this is a sip drill press that came out of a paper mill here in Maine that it closed down
I think you're going to like to see some of the features of this machine obviously a very old
machine with a flat belt drive I do have a guard for the top that I've removed so you could see
this for the video but this is one of the neatest drill presses that I've ever seen and I got this
as it is right now I didn't even clean it or anything and let me show you some of the features
so one of the really neat things about this drill press is you have first of all quite a bit of
quill travel here as you can see and you have a stop here that you can set your quill travel
but beyond the regular quill travel you can also see as part of the column I can move this entire
assembly look at the distance you have to be able to set up just a very versatile system
that's very quick to move on the machine plus as we just mentioned the quill travel itself
but even beyond that you can see the machine also has a neat so you can see the amount of
versatility you have with this sensitive drill press I mean just a really neat machine that
you don't see every day now I'm going to show you the quick change of the speeds on the machine
and how that works it automatically changes the speed with a handle and the flat belt will move
on the cone pulleys so this is how the mechanism works you can see the flat belt there if I move
the speed selector handle you can go up to get to your different speeds pretty neat design
this was the second machine I bought at Hills Machine Works when I was working out of an attached
garage to my house before I built this building up and all I had in my shop at that time was a
small drill press the date 50h press and a 12 by 36 sears lathe the ones that are unmentionable
on the practical machinist forum anyway I bought the date press brand new because I really wanted
a press that's going to be capable and I do a lot of press work here two stroke crank shafts that
are able to be pressed apart I use plates like this that I made to support the crank webs and
most of the cranks can easily fit down in between on this press here this table can be moved up and
down supported by these pins the head can move the entire width of the press and it's 50 ton
which does support anything that I'm going to be doing in here just overall a really great machine
I've been extremely happy with this one of the other cool features is on the ram you get a lot
of travel here of a screw type screw type ram and take these off you can make very easy to make
whatever size shape you want instead of having to use pins all the time if you're doing a repeat
job it's easy to make a piece that can go up on here on the ram and you're all set this rocking
chair is here for when my wife wants to come on visit I also have a greener number three arbor
press that gets a lot of use in here do a fair amount of broaching of smaller stuff on that press
and just a really nice arbor press and lastly I have a greener number one press for smaller press
work between these three presses I can accomplish most of what I want to do here although I am
looking for a ratcheting arbor press made by greener maybe a five or larger with a base
currently have two surface grinders at hills machine works although the dual is for sale the
dual is a 6x12 machine this is the first surface grinder that I bought when I first opened my shop
and then I moved up to this abrasive number one and a half which is a 10x15 surface grinder
this one is a really nice machine very heavy base this is a very heavy duty surface grinder
and this I use this for making some of my own setup pieces I made a custom set of parallels
that fit inside a volkswagen air cooled cylinder head so that I can support the combustion chamber
side on the parallel while I do machine work on the opposite side for fly cutting and just use
this for a lot of different stuff that comes in is I think it's one of the things that you're
going to have to have in a machine shop if you're going to be a manual machinist in the repair work
industry you just need a surface grinder for your own personal use this is a sue valve face
grinding machine I use this from time to time here at hills machine works on older automotive
in some power sports applications and so from time to time I get work sent down
from local power sports place asking me to grind either valve faces or valve seats
inside the cabinet down below I have pilots for doing valve seats I have metric and imperial
sizes I have an original sue valve grinding attachment for the seats and a lot of accessories
for it that came in the machine when I got it and I have a wide variety of stones for grinding
different types of seats and valve faces since we're right here I'll show you this engine stand
that I have this is specifically for air cooled volkswagen one of my target markets and I have
here is a stand with a bell housing that came off an air cooled volkswagen transaxle so I can bench
start those engines in my shop if I want to continuing with the automotive and power sports
application section of my shop I do have a lapping plate here this is a precision lapping plate
that I recently had resurfaced by my friend Steve who I mentioned earlier and I do a lot of lapping
in here on aluminum parts things like timing covers or anything like that that may be warped
that are not as easily set up on a milling machine to fly cut I can lap them in and actually lapping
them in produces a better finish and a lot of times more flat than I can do in the mill anyways
so that's something that gets quite a bit of work as a side note while I'm down here in this area
I'll show you this berk number three horizontal mill that I recently picked up obviously this
is more of a toy than anything that I'm going to use in here in a professional setting but
the goal of buying this machine is I'm going to kind of restore this machine I'm going to do a
series on it on my youtube channel where I do a lot of repair work on machine tools and what I'm
going to do is I'm hoping that I have a few sons who are interested in this trade and I'm going to
start them off on my smaller logan lathe and on this small horizontal mill to kind of get them
the basics of manual machining before they move up to my larger machines so that was the goal
of purchasing this one not something I'm going to use in a professional setting very often but
could be real handy in raising up the next generation of machinists so this is my sudden
honing machine and it's an older rod honing style machine I use this not to do a lot of rod
reconditioning but to use a variety of different mandrels to do two stroke cylinders and four
stroke cylinders that have cast iron bore this came off a jet ski we're going to be doing this
one and then I have a honda 200m cylinder lined up that right now is over on the granite table
that we're going to see in just a moment but like I said I just have a variety of different
mandrel sizes and they can be used not only for engine cylinder applications but sun and
stones that you can hone just about anything with you know anything that you can manually
stroke on this machine you can hone with so this is an important part of the shop
because anything back at the bridge for it that gets poured out gets finished honed over here
on the sun and hone. Turning from the hone I just have a little workstation back here
and I have a 3d printer here it's a flash forge finder just an entry level 3d printer
and I've used that to print holders for my AXA tool posts accessories that we're going to see
on the Logan 922 lathe when we get around to there and it's just something that I wanted to
get into to try for myself and if I decide that I like 3d printing I'm going to upgrade to a better
model especially if it's something that I find that I can use you know to make money in my shop
I have an ultrasonic cleaner right here I use this a lot for carburetor parts and other
small parts rocker assemblies and stuff like that off engines I find that it works really well
and I got an old homemade a little homemade anvil out of a railroad track I have a blast cabinet
here at the shop I do some soda blasting and sand blasting here at Hill's Machine Works
again if I have a set of heads that come in first thing I'm going to do is start cleaning those up
I'm going to put them in there I like to be able to soda blast for aluminum stuff so that I'm not
damaging anything and sand blasting is always good for you know a heavier duty kind of an
application this is just a cheap blast cabinet I'm sure you can see where it came from and I
have a tool cutter grinder and a bunch of accessories for that and those the containers
behind it this is an old German machine I got this machine from a friend of mine named Tony
with Quality Machine Tool and was cast at Maine he was very generous that he gave me this tool
cutter grinder when I opened my shop I'm going to show you guys both of my surface plates so this is
my my large surface plate and this is big enough that I can put anything on here that fits on any
of the machines I have in the shop so I think that was important to get a surface plate that
you know if it can fit on the bridgeboard table it can also be over here and you know it it can
accommodate any work that can fit on the bridgeboard table so right now I have a Honda
200M cylinder head sitting here and we're going to be doing a valve we're going to grind the seats
on this and I was just checking to make sure that the head wasn't warped which it wasn't
and the the actual cylinder I told you guys I'm going to show you that that's back over in the
welding area right now sitting right here so that's going to be getting bored and honed as
well but with the surface plate of course I have accessories for that you can see that I have a
couple height gauges here and I do a lot of layout work in this shop when we go over my toolbox I'll
show you some of my layout tools but I'm using a lot of Dykem in here a lot of layout for for
things that come into here especially anything that comes in from the forest products industry
world where I might be duplicating a part or I might be welding something up and then turning
it back down or anything like that I do a lot I utilize layout very old-fashioned layout techniques
in a lot of that work so the surface plate comes in handy especially with the height gauges and
I have a midget oil dial bore gauge is graduating intense for doing my cylinders and of course I've
got gauge block sets I've got gauge pins and a master stare at level in the box in the back there
that you can see so this is I'm using these all the time especially checking valve guides and
stuff it's handy to have gauge pins to use as a kind of as a go and no go set and of course you
can find all kinds of uses for that kind of stuff so we're back over here now towards the bridge
port and let's turn to my toolbox area this is my main toolbox area for machinist tools
you probably saw when you're looking at the fabrication area which is behind me
I had a roll around chest there that's all just hand tools and and clamps and stuff like that I
didn't want to bore you guys showing you that kind of stuff but this this chest here is a
Sears branded chest I believe that was made by Kennedy this this is pretty old my dad bought
this when he entered the trade before I was even born my dad retired as a machinist he was a tool
and die machinist in Cooper Industries for many years he was a part owner in a company and then
he ended his career at Batten Ironworks in Maine and he gave me this which is pretty special when
he did I use rule clamps quite a bit I do a fair amount of key seats in here so I utilize that for
layout purposes you know I've tried to keep better quality tools trying to stick with Starrett and
Brown and Sharp and other brands I don't have all my stuff it's not
super high notch but I've got other mics in here and depth mics different indicators
stuff like that a lot of my indicators that I got were from family members who were in the trade
my dad here had some dial indicators and test indicators that he gave me
and Nelson Charette is another relative when he was a millwright one thing over here I wanted
to show you that I have is I do have a blue M furnace I can do you know if it's something
small I want to make my own set of parallels or whatever I can use this for heat treating but you
know it's very small stuff nothing big but that's handy to have in this shop finally I'll just show
you a couple things I have here I do have a carbide grinder that comes in handy if I'm touching
up any brazed on or cemented carbide tools and I've got a chamfer tool here and you can see
there's a pantograph down there so again anything like this that I can add to my shop gotta have a
radio and a tv I guess but anything I can add that adds functionality to Hills Machine Works
I've gone ahead and done it I have a cheapy parts washer and we're back to the fabrication area
let's end our tour with another Logan lathe this is a Logan 922 11 by 36 lathe you can see that
the headstock cover there has not been painted yet I just got that off ebay and put it on this
lathe is actually the one that I gravitate to anything that I can do on this lathe I do it
this doesn't have a digital readout but it's very accurate with the dials and of course I always can
use mighty mags with dial indicators travel indicators the collet chuck works really well
I also have other accessories for the lathe you can see I have a three jaw chuck there
got a small four jaw chuck some of you may be interested in seeing the milling attachment that
I have for it and I have a milling attachment for the larger lathe too but I forgot to show you
why don't I show that as we close out I hope you've enjoyed watching this video of my shop tour
get ahold of me on social media let me know what you think and if you have any questions or would
like to send out a request for a quote you can contact me again at hillsmachine.com
I'm also on LinkedIn Facebook and the YouTube channel Main Machinist and here is the larger
of the milling attachments that fits the 14 by 40 lathe and that wraps it up folks
Jeremy Hills here from Hills Machine Works saying thank you for watching hope you have a great day