#rvlifestyle#airstreaming#rvtravel#airstreamtrailer In this video we go through the steps to set up the Micro-Air programable thermostat. we show you all the settings you need to review and adjust. And hoe to create a daily and weekly schedule for you RV temperature.
****************** MENTIONED IN THIS EPISODE ****************** Links suggested in the video: To shop TechnoRV for the best service and support on RV Technology use our link here: http://technorv.com?Click=11783
RV: 2017 Airstream 28 Flying Cloud Truck: 2021 Ford F150 XLT 3.5 Ecoboost Bikes: Rad Power Bikes Rad Mini Kayaks: Hobie Oasis 14'
*********** CAMERA GEAR *********************
Our Complete Camera Setup: Go to Camera - DJI Osmo Pocket 3 Dash Camera - BlackVue DR770 Still & Video Camera - Sony A7C Sound - DJI Mic 2 Flying Camera - Mavic Mini 4 Pro
ZEPHYR TRAVELS All Rights Reserved *This channel for entertainment purposes only. We are not RV or travel experts. We share our opinions and what works for us, but you should do your own research.
AI Generated·May contain errors
In this video, we're going to walk you through what it takes to set up the micro air RV thermostat.
We've recently installed one in our Airstream and we love it. We've gotten it programmed where it
works almost seamlessly in the background and we hardly ever have to touch it. So we're going to
walk you through those steps right after this. Hi, I'm Randy from Suffolk Travels and I just
installed this micro air programmable thermostat in our Airstream and it's a game changer. Now,
I kind of stayed away from these for a while. They've been out for a couple of years and I've
known about them, but I kind of stayed away because the Wi-Fi connection and we don't always
have a good Wi-Fi connection where we're traveling. And so I didn't want to get into something that
was dependent on Wi-Fi. But once I've got it, I realized it's not dependent on Wi-Fi. In fact,
you can use Bluetooth within your trailer. So if you don't have a Wi-Fi connection where you're
staying, you can just connect this up with Bluetooth. But it also has the advantage of
being Wi-Fi connected. It allows you to get notifications on your phone. So with us, with
our dogs, if the air conditioner shuts off or something goes off on this and the temperature
goes too high, we will get a notification and we can go in through our phone and change the
settings on the thermostat from anywhere. As long as we have Wi-Fi, both in the trailer and on our
phone. So I think that's really a great thing, but it's not the only reason to get this. Like I said
in the intro, once you get this program, it's almost invisible. You hardly have to mess with
thermostat. I have the thermostat set up so that there's a low temperature and a high temperature
during the day. That if it goes over this temperature, the air conditioner goes on. If
it goes below this temperature, the furnace goes on. I have a different setup for the evenings.
So when we are watching television and we're inside, I have it just a little bit warmer.
And at night, I have the thermostat dropped down to a lower, more comfortable temperature for
sleeping. And this works great. One other thing this does is it automatically switches back and forth
between the heat pump and the gas furnace. So I can make a setting. I can set the
temperature where that is and it will jump back and forth. Okay, so I'm going to walk you through
some of the features on this thermostat. And we're going to start with the main display here.
And so on display, you can see Wi-Fi connected. You can see outside weather. So we're showing
sunshine and 68 degrees. You can see your zones, multiple zones on this. We happen to have only
one zone, so it's zone one. Here's your mode. And so when you press into this, you can
select whatever mode you want. I'm in off. You can turn the system on. And then you can select any of
these modes. So if you want it just to be a fan only mode, it can be that. It can be an air
conditioning mode. It can be whatever you want on here. I'm going to leave it off because I don't
want the air conditioning cycling while we're making the video. But normally I would have it on
auto and heat pump and air conditioning. That way I have my programs. And so you can hear it starting
off. I'm going to turn it off. Okay, so that way it's not cycling while we're doing the video.
Down here you have your settings button. And in here you can walk through all these different
settings. So you have a help screen setting. I didn't think this was very helpful. Basically what
this did is it takes you to a website, takes you to their website. And unfortunately it only takes
you to their main page. It doesn't get you into where your help screens would be. So I didn't
think that was very helpful. I ended up finding the help instructions. So that was good eventually
but it really was a pain. You have a day and night setting here. What that does is on the day setting
the display will go into a dim mode. On the night setting the display will shut right off. So you
don't want the display shining in your eyes at night. You put it on the night setting. You have
your schedule setting here where you can set up different schedules. We'll get into the more detail
on that. You have a temperature adjust and we'll talk about that more. But you can go in here and
you can set a differential between what the air temperature says and what the thermometer says.
You can enable or disenable the programming here. You can restart the thermostat. So you can
go through and start it back up. Here you can do touch screen calibrate. On this one I would
probably recommend not messing with it. It's probably fine the way it comes. You can go into
Wi-Fi and you can find out your Wi-Fi network and your password and everything's all in here.
Bluetooth, you can go in and reset the Bluetooth. Again, wouldn't mess with that. It does have
an auto Bluetooth setup so that you don't have to go in and change it or give it a name. It should
just automatically connect Bluetooth wise. Brightness, in here you can change the brightness
level of the display. Five is the highest and you can take that down to a lower level to one.
And then the sleep level, you can change that to whatever you want that to be. And you can see as
you change it, it changes the screen level. So we're going to leave that where it's at. I'm not
sure if I'm going to pronounce this right, but this is the hysteros. And basically what you're going to do
in here is you are going to set the differential from how many degrees below the set point does it
take before the system will turn on and how many degrees above the set point will it take before
the system comes on. And I think this can be really helpful for fine tuning the system. Again, I left
it where it's at and we'll get into more detail. Reset all, you can set this all back to factory
settings. Over here, you can switch between Fahrenheit and Celsius. In here, this is auto
generator. So if this RV was equipped with a generator, this would kick on the generator.
You hit this and it would kick the generator on automatically when the calls for air conditioning.
This is home and away. And what this does is it allows you to set up the thermostat
with two sets of programming. So you can have the home settings where you have temperatures at a
certain level and away settings. Think of it like a home thermostat, it would be your vacation
settings. Here you can, this is with the aqua heating delta. I don't have that in our system,
so I'm not sure what that does and I'm not going to get into it. Setup is important. When you click
into setup, you're going to find on the setup screen, the first screen you're going to see here
is the auto gas changeover outside temperature. Basically what this is going to do is it's going
to pick the point when you stop using the heat pump and you automatically switch over to the gas
furnace. And this is really nice because if you've used your heat pump and you know as the temperature
goes down, the heat pump becomes less and less efficient. You want to pick that point where it's
the best switch over so that the heat pump doesn't have to run too much and just blow cold
air, but then you want to get the furnace to kick on. I found it with the the medic thermostat that
was set pretty close to 32 degrees and I wasn't pleased with that. I have it set at 37 and we'll
talk more about that when we get into functioning with the thermostat. The next screen off of this
on the setup, this is basically going to tell you what your system is set up as. So these are
on the main board to your air conditioner. These are dip switches and they will be set to configure
your system. You don't mess with these at all, but it's just giving you a display of what that is.
And so in our case, we have a heat pump and we have a furnace connected through
our main air conditioner. So that's basically all that's telling you. Over here, this next one is
display. You can have this display as furnace or aqua and that's depending on what type of
furnace you have. So if you had an aqua type, you know, baseboard heating system, you could switch
it and have it display that instead of furnace. When you hit next, it takes you back to the
original screen. So I'm going to walk you through the schedule screen and you can do it on here,
but I actually found that it's a lot easier to set that schedule screen up on my phone. And so
that's where we're going to do it. But just so you know, you can schedule the unit here. And if you
were to, let's see if I switch to Tuesday, you can see I have schedules set up here and we're
going to walk you through how to do that on Wednesday. So we're going to move over to my
phone for the next part of this and we will walk you through the screen and we will set up
today's programming so that it will run for today and give you an idea of some tips and tricks on
how to set that up to make your Airstream comfortable or your, I shouldn't say your
Airstream, your RV comfortable. So let's move over to the dinette where we'll work on those.
Before we get into programming the thermostat, I wanted to take a minute to tell you that
we were not sponsored by Micro Air or anybody in this video. The opinions expressed in this video
are our own. In fact, we purchased the thermostat with our own money, but we did buy it through
TechnoRV and we use the discount code Zephyr Travels and saved an additional 5% above the
sale price on this thermostat. And you too can also use that discount code. And if you do,
it helps us because it's also an affiliate code and we get a little bit something back
on your purchase as well, but it doesn't cost you anymore. In fact, it actually saves you
money. So hopefully if you're interested in buying one of these, you head over to TechnoRV.
There's a link in the description below and purchase one of these for yourself. We are very
pleased with this. And in fact, we were also able to get that really nice looking bezel that goes
around the thermostat included, which we didn't see available anywhere else. Definitely check
out TechnoRV for these thermostats. They have them to fit pretty much any type of air conditioner,
whether you have a Dometic, Coleman, or any other brand. They will have a thermostat designed
especially for you and it will swap right in very easily. So now let's get back to the video
and we'll get into that programming. Thank you. Okay, so now I have my phone in front of me.
I'm going to go to the micro air screen and I'm going to record the screen so you can watch it.
You can connect either through Bluetooth or through Wi-Fi. I'm going to choose Wi-Fi. It
really doesn't matter which you choose. We're going to go to Zephyr Travels, which is what
we've named this device. And on this screen, you're going to see now that we have the inside
temperature shown, the outside temperature, the cool two settings, power, and info. And we're
also up in the top, we have Wi-Fi and settings button. So we're going to go to that and we're
going to go to edit schedule. And now we're bringing up the Wednesday schedule. And as you
can see on here, there is nothing set. And so I'm going to go and create a schedule for today. I'm
going to start with the first schedule here and I'm on that right now. So I'm going to click into
it and I'm going to go down here where it says fan only. And I'm going to cycle through the different
modes until I get cool and heat pump, because I want to set both of those together. And basically
what I'm going to do is I'm going to set a lower limit and an upper limit of how I want the
temperature set. So it's defaults to 72 degrees for cooling and 68 for heat. I'm going to leave
the 68 for heat during the day, but I'm going to change the cooling temperature to 74. Now we can
set the fan and I'm going to set it to auto. And because this is my daytime and I know temperatures
could be higher for the air conditioner, I'm going to set it to auto high. Now the next thing is it's
still disabled, so it's not a working program. So I'm going to hit disabled. And now I can set
a time. And so I want this to start, maybe not 8 o'clock, I think we're going to start it
at 7 a.m. in the morning. So at 7 o'clock in the morning, I want the heat to go up to 68 degrees.
I want the air conditioning, if it's above 74 degrees, I want the air conditioning to kick on.
And it's going to start at that point. And from then on, until I set another schedule, that's what
it's going to do. So now I'm going to save that. So now you can see I have that first schedule in
here. Now I'm going to set a second schedule. And again, we're going to go through fan and we're
going to go through modes. And we're going to get to we get cool and heat pump. Now on this one,
we're going to keep the 74 for cooling. And we're going to take the heat up to 70.
And we're going to go back to auto fan, total auto. And on time, we're going to set this one
for 7 o'clock p.m. And so that first schedule will run from 7 a.m. to 7 p.m. At 7 p.m.,
maybe we'll make this 6. Let's make it 6. At 6 p.m., this second schedule will kick in. And so
typically in the wintertime, the temperatures are starting to go down. And so the trailer
will start to cool off. So I want the trailer to be a little bit warmer at that point. I'm not
going to change the air conditioning settings at this time. I'm just going to leave them where
they're at. And we've got the time, p.m. So we've got the fan set. So we're going to go save.
Now I'm going to set one more here. Again, I'm going to go into the mode. Do you want to get
heat? Cool and heat pump. On this one, I'm going to set the temperature setting to 65,
the air conditioning to 74, the fan mode to auto medium. And I'm going to save. So
and I'm going to set the time for 11 p.m. So this is my overnight schedule. And so this one will
start at 11 o'clock at night. It will take the temperature from 70 degrees down to 65.
Air conditioner will run at the same temperature. I could adjust that if I wanted to.
And I can always come back and readjust these. And I'm going to go save. So now if you look at
this main screen, I have a morning setup. It's going to go turn the room temperature up to 68
degrees. The air conditioner will be running at 74. That will stay until six o'clock at night.
At that time, the room temperature will go up two degrees to 70. And then at 11 p.m.,
the room temperature will drop down to 65. And the air conditioning setup is the same through
all those. And I've got some different fan speeds set up. So notice this is all programmed.
And now if I want to take this program and set it to another day, I hit copy day. And now I
picked the day. So I'm going to set it to Thursday. And now it's moved and it's made that setup
exactly the same for Thursday. So I don't have to go through each day and walk through each of
these steps. Once I have a day programmed the way I want it, I can set that up and have it go
through all of them. Now I mentioned on the walkthrough of the screens that there was a
couple of unique screens in there that I wanted to talk about. One of them is the thermostat
adjustment. And so I noticed right out of the box that our thermostat was running a little bit high
in temperature. So I went into that setting, I used a meat thermometer, and I got the actual
temperature of the room. And then I compared that to what was being displayed on the thermostat.
And I found the thermostat was running a little bit hotter. So I moved the room temperature down
by about three degrees. That seems to work pretty good. The other thing that I wanted to talk
through is essentially the temperature differential. And so what that is, is what point will the system
turn on for what your settings are. So if I've set the air conditioning at 74 degrees,
what temperature does the system turn on to bring the room down to 74 degrees?
In our case, it's a two degree differential. So basically if it's at 74, it will skip the next
two degrees until it gets to 77 degrees. And that point it will turn the air conditioning on
and cool it down. Now it doesn't stop at 74, it actually goes past that by one degree. And so it
will cool it down to 73 degrees. Those differentials are all adjustable. So if you want it to kick on
sooner and cool it down more, you can do that. The same thing for heating. It would draw for heat
two degrees below the set point. So if it's set at 70 degrees, when it gets down to 67 degrees,
it will start the furnace on and draw it, and it will heat the room up until it gets to 71 degrees.
And then it will shut off. Again, totally adjustable. And I think what's neat about
this is it's adjustable by zone. So and the same thing with the programming. You can program by
zone. So if you have two air conditioners, you could set that up so that maybe at night,
you want the main air conditioner to run and heat and cool. And you want the secondary one
that's in your bedroom to kick on when the main air conditioner has trouble keeping up.
So you could use that differential and set a higher differential on the second air conditioner.
So if this one's at two degrees, set the other one at four degrees. And so if this one can't keep up
with the temperature and it continues to climb or drop, and it hits that four degree differential
from the setting, that second air conditioner will automatically kick on and add more capacity
and help cool you down. When you could also set the shutoff point so that only the one air
conditioner tries to maintain that temperature. There's a lot of flexibility into this. I'm just
thinking through these in my head and trying to offer some tips to you guys. I think when you get
this micro air and you set yours own up, it's worth trying to experiment with some of these
settings a little bit because I think there's a lot of capability here. Another setting which I
think is really important is the auto gas changeover. That setting will pick the point
where it goes from heat pump to furnace. And in most RVs cases that's a gas furnace,
and it could be your baseboard aqua heating, or it could be your forced air gas furnace.
Typically the manufacturer's thermostat, at least on our Dometic setup, that was set at
about 32 degrees, which is way too cool for that heat pump to keep up producing heat. Its
efficiency drops off significantly as the temperature goes down. I've set that at 37
degrees. So what happens is the heat pump will run by itself until it hits 37 degrees,
then it automatically switch over to the gas furnace and that kicks on. But it also does
another little neat trick. It uses the fan on the heat pump to circulate that hot air.
So basically what it does is it turns the fan on, and in our case we have ducted AC,
so we've got air ducts in the front and the back of the trailer, and an intake here in the center.
Which is right above where our furnace is. So that furnace for the most part is heating
this part of the trailer more than it's heating the ends. Especially because we've got a lot
of windows on each end. So what happens is the furnace kicks on, it starts running,
after it's run for a little bit it turns the fan on. And that fan will run and it will pull
the air from the center of the trailer out to the either ends, and it makes it much more evenly
comfortable in here. That is just one of the neatest things that I've always wondered if we
could do that. Our other thermostats you could manually turn the fan on, but it would just run
all the time. Having the thermostat control that and turning it on and turning it off with the
furnace is just awesome. So I highly recommend that you try this setup. It is just, it makes
it so much more comfortable in here. Literally when we are using this setup, we've had some
really cool days. We've had nights getting down to 32 degrees. Furnace has been kicking on. It's
been super comfortable. We've hardly had to touch the thermostat in the trailer when we're in here.
I would say the only thing we've done is a couple times, maybe that six o'clock setting when I have
it jump up to 70 degrees, maybe it needs to be 72. And I might change that. So it's really nice
having this app. I can go in here, open up the app, connect into this as long as I have Wi-Fi
on the phone and on the trailers that the thermostat is connected into. I can connect
into the device and anywhere I can go in here and adjust the temperature settings,
the cooling settings. I can turn the system on or off, all remotely. Another thing that I can do
if I go into settings and down the notifications, I can set an upper limit and a lower limit to when
I want to be notified that the RV, the trailer, is warmer than 80 degrees or cooler than 55.
And then it will notify me on this phone that I've got a temperature differential like that.
Like I said, it works if you have Wi-Fi. It also works Bluetooth. So let's say we're not in a place
where we have a Wi-Fi connection. I can go in through Bluetooth and at least work all those
settings within the trailer. So I can still use this as a remote device inside the trailer to
make adjustments. So if I want to turn on the AC because it's getting to be 81 degrees in here,
I can just do that by hitting the power and it takes about a minute and there it goes. Now we're
cooling the inside of the trailer down. We're trying to get that temperature down to the
setting of 74 degrees. Well, I hope you found this video informative. If you did, please let me know
by giving me a thumbs up. If you have any questions, please leave them in the comments. I will answer
all of them. And I'm sure one of the questions is going to be, how do we, what do we do for Wi-Fi?
If you have that question, put it in the comments. I will make a future video on our Wi-Fi setup,
at least as far as how we are here and some of the options that we have available. So until the next
time everybody, I appreciate you watching the video and we will see you guys down the road.
Take care.