TAC vs. AAE Hybrid Vanes Shootout

Defending with Past Crossbows
3 followers
Apr 21, 2026
TAC vs. AAE Hybrid Vanes Shootout
Comments are disabled for this video.
Shout out to Adams Precision Archery. These guys built me some custom arrows
that I'm pretty stoked to check out. So I gave them my measurements carbon to carbon,
the component I wanted. So this is the Easton X10 Parallel Pros 4 mil 300 spine. This is that Easton
four millimeter half out aluminum. This is a 125 point. We got their wrap right here which is
really sexy and then tack veins which are new to me. Looks like a slight offset to the left,
maybe two or three degrees. I want to shoot these right now and see how they group with my current
setup. But as far as aesthetics go, I think he won. These are some of the sexiest arrow builds
ever. I appreciate it. I don't really know these guys. I just know that I wanted to order some
arrows from them and they did a bang up job. Adams Precision Archery. Head into the studio.
I just had some arrows built by Adams Precision Archery. Made me want to test something. So
these versus these. Easton four millimeter aluminum half out 125 fill point. Easton X10
Parallel Pros with AE hybrid HP and an elk shape wrap. $449 versus 125 point Easton four millimeter
aluminum half out. X10 Parallel Pros. Adams Precision Archery wrap. Tack drivers. Three
veins. Slight offset. $445. So four grain differential. So we measured the balance
point of both of these arrows. You simply place the end of the arrow to the throat of the nock.
Did that for both. Then you also take the balance point to the throat of the nock.
Both of these arrows have FOCs of around 15 and change. Let's go shoot them. And at 80 yards
they're hitting where I want. These arrows weigh 3.1 grains less with the tack drivers
and consistently past 70 yards even though they weigh less they're impacting lower.
This has a crazy helical five plus degrees. This has probably a two degree offset.
Is there something to do with these veins? Do they not create as much
lift? Is there more drag? Something. And it's not a huge deal. You could tune to these arrows.
You could build your sight tape to these arrows but that's just what I'm finding is that these
don't impact the same as these. Well so does 3.1 grains matter between arrows? I'm not sure.
Does tack veins. These tack drivers. I think they're tack drivers versus these. Is there
one that's better than the other? I don't know. I think. So we shot at 30. These two
and then these two. 50. These two. These two. 70. 70. 90. 90. And I don't know. I'll have to go
back and look because a lot of arrows in a short amount of time. My arm's gonna fall off but I feel
these might have grouped better but I don't know. Have we learned anything? Have we proved anything?
The speeds. This is definitely a couple feet a second faster at launch and downrange than these
and these weigh less obviously but yet I felt like there was always a one or two. One of these
at least was always a little lower than I liked it to be and I always felt these were pretty good.
So my first impressions on the tack veins is they're cool. They look cool. They're super stiff
where these are not. These are almost rubbery. I think if you nicked a vein they're done whereas
these they're a little more pliable. I know these can steer a fixed broadhead. We'll have to test
and see if these can steer a fixed broadhead and if one's better than the other but this was my
first exposure to tack veins to actually like use them and test them out. Shout out to Adam's
Precision for making awesome arrows. I am going to put some IP4 nocks in to match and maybe see
if that tightens up. I don't know if it makes a difference. Always be tinkering. Always pursuing
perfection where perfection cannot be perfected. That's archery nothing but love. Oh and we're at
my backyard so archery talk. Right behind me here is a field. Plywood. Actually OSB board. OSB
and then on the other side of the fence is the shed where nobody on my neighbor goes back here.
The entrance is in the front so if I were to shoot over here it could go through vinyl in there. I
don't see any holes. To everybody's point who makes comments about my backyard. First thing I did is
talk to my neighbor. Made sure he was cool. He agreed to shooting at this angle. The majority of
my trajectory is headed to a field and then it's probably another 100 yards to a street.
Shooting in the residential area can be super sketch so be smart. Talk to your neighbors. Check your
local municipality. Make sure you're within the rules. Check your D loop. Check your release.
Don't sky draw and know that ultimately you're responsible if you were to put an arrow in
someone or someone's possessions and I understand that. So to avoid all this we're moving. So I only
got a couple months left here and then I'm going to move out to the country. We ain't got to worry
about it. So separations in the preparation. Catch you on the next one.
