Storage and Re Organization Project Part 11 Change in Plans and More Demolition

TV Electric Fan
2 followers
7 Video Views·Feb 28, 2026
I am going to use the majority of the month of March to re-organize the entirety of the lower level of this building. I want to rearrange the storage such that as much equipment is visible on display as possible and such that the space is used as efficiently as possible. I also want to categorize equipment to all be in the same place and easier to find.
Storage and reorganization project part 11. There is a slight change in plans to be made here.
I was originally going to have the second shelf here, but I was looking at it last night and
I think it should go here instead. Now that does cause a couple of other challenges and
potentially limits where I can put one of the smaller shelves, but I think from an aesthetics
perspective it's going to look a lot better that way, and so that's the way we should do it.
So that means we have to do some more demolition. We have to take this out,
this out, and this out, which is fine because none of this is structural. It serves no purpose anyways.
Let's see here. I need to properly run these telephone lines someday, but that's a whole
different story. For heaven's sakes. And I just changed that indicussant bulb, but now it's
probably going to burn out again because we have to be banging that thing out of the
underneath the whatever that part is called. Okay, now I gotta make a mess again. Where is that larger
hammer? I don't need that. And hmm, well I guess I'll try to go without it because I don't know
where it is. If this is anything like the rest of the structure down here, I won't need it anyways.
This is not super secure.
It wasn't even held in at all on the bottom, I don't think.
Yeah, we're not going to need that bigger hammer.
Okay, so this piece, I'm not sure if this is what's holding it on or not. Nope. Good.
Oh, I forgot about that stinking drywall on there. That really should come down too.
Well, that's cosmetic and really only related to the other side. I'll deal with that later.
Okay, that's the floor. I thought that fell hollow. That I'm going to leave because I think that this
Oh no, that's not. That's the floor too. Okay. All right, I gotta get a
wastebasket now. Probably just cancel most of these pieces out. These are still good.
We can clean this up. Get a couple of these nails out of there.
That's a screw. I'll try to straighten that out a bit and see if we can undo that.
Then that's a good piece to have. This, maybe we'll cut this. Did you hear a bell?
Yeah, we'll cut this part off. Cancel that part. Keep the rest. And this,
this is pretty decent as well. We probably can keep that as well. This piece would be fine.
Sands this. That will just cancel out. Cancel that. This we can keep for something.
Okay, I'm going to get the vacuum and the wastebasket down here. And these are nails.
We can pull those out with this. I thought those were screws for some reason. Okay,
that's pretty good. That wasn't bad. That went much quicker than I was expecting.
This is part of the original support thing. I'm just going to slip that up there for now.
Okay, let's just cut the end of this off.
Probably can get those nails out of there.
All right, so that's a good piece of lumber. We'll keep that.
Might actually use that for one of the legs. Cut the ends off of this and clean this up.
And then we'll keep this as well. This will also be a good piece of lumber.
Cancel that part. There's another good piece of lumber.
We can use that for something else. And this piece has a screw, but otherwise
it's pretty good. So we'll just take that screw out. That's still very crooked.
Just need to get the threads to grab, which is proving to be quite difficult.
Okay, is that a stinking nail in there? Yes, it is. Let's get that out of there.
Go in the garage later. This, cancel. Now hopefully the vacuum bag doesn't have a hole
in it this time. And most of the dust will stay inside the machine. At least that's the objective.
I don't know if you could tell on the video or not, but I could hear the
pitch of the machine changing as I picked up that dust. I don't know of any HEPA bags you
can get for these things. Only paper ones. And the paper ones just clog profusely.
It's like sandpaper without WD-40 when you're picking up dust. So I'll probably have to change
this bag again when we're done with the project, just because of the dust. Let's see if it broke.
Nope, it didn't break this time. Well, you can see how much dust is getting through that bag.
Not good filtration at all. So after we're done with this project, I will change the bag again.
Okay, well that's that. We are now ready for the second shelf. Yes, this is the wrong way
to unplug something. I'm trying to be careful though. We're now ready for the second shelf
to go in. I'm going to get some dinner and we'll take care of this tonight.
